Download Edge Performance Chips Installation Instruction

Transcript
Evolution
Dodge 5.7L Hemi
3. This is where you can view all of the current recorded high values. The arrow
located at the bottom right corner of the screen indicates there are more parameters
than the display can show. Use the [UP] and [DOWN] arrow keys to scroll through
the list of records. If you would like to reset a single parameter, select the desired
parameter and press [ENTER]. If you would like to reset all of the records, select
the Clear All option and press [ENTER]. To exit out of this list press [MENU].
Reset Evo Settings
If you would like to restore the Evolution back to its original factory settings, follow these
steps.
Note: This will not program the vehicle back to stock; it will only reset the Evolution to
the preset defaults from Edge Products. To reset power level, return to “Power
Programming”.
1. Enter into the Main Menu. The Main Menu screen appears as follows:
2. Select Setup and press Enter. The following screen will be shown:
- 29 -