Download 7025 User Manual

Specifications and Environmental Conditions
2
2.1
Specifications and Environmental
Conditions
• temperature range: 5–50°C (41–122°F)
Specifications
• ambient relative humidity: 15–50%
See Table 1.
2.2
• pressure: 75kPa - 106kPa
Environmental Conditions
Although the instrument has been designed for optimum durability and trouble-free operation, it must be
handled with care. The instrument should not be
operated in an excessively dusty or dirty environment.
Maintenance and cleaning recommendations can be
found in the Maintenance Section of this manual.
The instrument operates safely under the following
conditions:
• mains voltage within ±10% of nominal
• vibrations in the calibration environment
should be minimized
• altitude does not effect the performance or
safety of the unit
2.3
Warranty
The 7025 bath is covered by a 2 year warranty that
takes effect 10 days after the product is shipped. The
manufacturer will provide parts and labor without
charge for repair or replacement of the instrument due
Table 1 Specifications
Operating Range:
Temperature Stability:
Temperature
Gradients:
Set-point Accuracy:
–20 to 110°C
±0.005°C or better
±0.01°C max between any two points in the work area
±0.5°C or better
±5°C
Cut-out Accuracy:
Exterior Dimensions:
Width: 20.2 inches
Front to back: 15.88 inches
Height: 12.2 inches to working surface, 15.5 inches to top of stirring motor
Power Requirements:
115 VAC (±10%), single phase, 60 Hz [230 VAC (±10%), 50 Hz Optional]
Weight:
55 lbs
Fluid Volume:
Approximately 2.1 gallons
Working Area:
5 3/4" W x 3 1/4" Front to Back x 7 1/2" Deep
10
Manual Rev. 722602
Hart Scientific