Download Manual

Manual de usuario · U6200
0 Control elements and connections
0.1
Front Panel
1
2 3
1
POWER:
2
3
STAND-BY-LED:
Front Buttons:
5
6
7
DISPLAY:
IR-SENSOR:
USB:
0.2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
4
5
6
7
Switches the receiver ON or in Standby mode. For total switching off, use the main
switch at the back side of the receiver.
Shows if the receiver is in Standby mode (when LPC mode is ON)
Buttons for administrating that have the same functions like the buttons on
the Remote Control.
Four digits to provide program information.
Receiver of Remote Control signals.
Open the lid and will have access to the conditional access and the USB1.
Rear Panel
1
2
10
11
3
ANTENNA IN 1:
ANTENNA IN 2:
Y, Pb, Pr:
COAXIAL S/PDIF:
TV SCART:
OPTICAL S/PDIF:
RS-232:
AC IN:
POWER ON/OFF:
LOOP OUT 1:
LOOP OUT 2:
AUDIO:
VCR SCART:
HDMI:
4
5
12
13
6
7
8
9
14
Input for the first digital tuner
Input for the second digital tuner. Must be connected to LOOP OUT 1
RGB output video output for external monitor, TFT or video beamer.
Coaxial output for digital audio
SCART output to connect to a TV.
Optical output for digital audio
Serial port to update the firmware of the receiver.
Power cord 230VAC/50Hz.
Main switch to switch off totally the receiver.
Output from first digital tuner, please connect to ANTENNA IN 2
Output from second digital tuner, it must be connected to ANT IN
Audio output for home audio systems.
SCART connector for video recorder, DVD recorder or DVD player.
High Definition video and audio connector for the TV.
1. USB opcional. Not available in all models
Reserved for technical modifications and/or errors
-3-
U6200
Version en_1.1
Univers by FTE