Download - Hawking Technology
Transcript
2-4 Operating the Wireless Range Extender (Universal Repeater) The range extender acts as a wireless repeater; it can be Station and AP at the same time. It can use the Station function to connect to a Root AP and use AP function to service all wireless stations within its coverage. NOTE: In Repeater Mode, this Range Extender will demodulate the received signal, checking if this signal is noise for the operating network then have the signal modulated and amplified again. Here are descriptions of every setup item under the ‘Basic Settings’ tab: Band Please select the wireless band you wish to use. By selecting different band setting, you’ll be able to allow or deny the wireless client of a certain band. If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless clients using the wireless band you select (802.11b, 802.11 Draft-N, or 802.11g) will be able to connect to this range extender. If you select 2.4GHz (B+G), then only wireless clients using 802.11b and 802.11g band will be able to connect to this range extender. 21