Download - Hawking Technology

Transcript
2-4 Operating the Wireless Range Extender (Universal Repeater)
The range extender acts as a wireless repeater; it can be Station and AP at
the same time. It can use the Station function to connect to a Root AP and
use AP function to service all wireless stations within its coverage.
NOTE: In Repeater Mode, this Range Extender will demodulate
the received signal, checking if this signal is noise for the
operating network then have the signal modulated and amplified
again.
Here are descriptions of every setup item under the ‘Basic Settings’ tab:
Band
Please select the wireless band you wish to use. By
selecting different band setting, you’ll be able to
allow or deny the wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz
(G), only wireless clients using the wireless band
you select (802.11b, 802.11 Draft-N, or 802.11g)
will be able to connect to this range extender.
If you select 2.4GHz (B+G), then only wireless
clients using 802.11b and 802.11g band will be
able to connect to this range extender.
21