Download CPM1A Programmable Controllers Operation Manual

System Configuration
Mode
Section 1-2
Input functions
Up/Down
00000: A-phase input
00001: B-phase input
00002: Z-phase input
Incremental
00000: Count input
00001: See note.
00002: Reset input
Input method
Count
frequency
Phase-difference, 2.5 kHz
4× inputs
Count
range
–32767
to
32767
Individual inputs
0
to
65535
5.0 kHz
Control methods
Target value control:
Up to 16 target values and interrupt
subroutine numbers can be
registered.
Zone comparison control:
control
Up to 8 sets of upper limit values,
lower limit values, and interrupt
subroutine numbers can be
registered.
Note In incremental mode, this input (00001) can be used as an regular input.
1-2
System Configuration
1-2-1 CPU Unit and Expansion I/O Unit Configuration
CPM1A CPU Units
10 I/O points
CPM1A-10CDR-
CPM1A-10CDT-D
CPM1A-10CDT1-D
Not possible to add Expansion I/O Units
or Expansion Units.
20 I/O points
CPM1A-20CDR-
CPM1A-20CDT-D
CPM1A-20CDT1-D
Expansion I/O Units
30 I/O points
CPM1A-30CDR-
CPM1A-30CDT-D
CPM1A-30CDT1-D
40 I/O points
CPM1A-40CDR-
CPM1A-40CDT-D
CPM1A-40CDT1-D
9