Download PROG-EXPRESS

14
Batronix – Prog-Express User Manual
PRODUCTION MODE
The “Production” mode offers an interface optimized for programming chips
simultaneously on multiple programming devices.
In this mode up to eight USB Chip Programmers and eight of the Professional Programmer Series (BXProgramming Device) can be controlled at one time. All recognized devices are displayed in the device
selection list (right part of the picture).
The individual programming devices are controlled independently so that a high level of productivity
can be attained. The programming speed for each individual programming device is almost as quick as
it is when using only a single device.
If a hub is used the USB connection of the PC and the hub must support the USB 2.0 High Speed mode
so that the data transfer rates are not limited unnecessarily.
The data entry fields in the upper section are described in detail in the chapter “Data Entry Fields”.
General indications for process control are covered in the chapter “Process Control”.
Prog-Express User Manual – © 1998 - 2010 by Batronix Elektronik, www.Batronix.com
This document is protected by German and international copyright laws. The incomplete or partial use, sale or reproduction, publishing –
including excerpts – of any kind requires the written permission of the author.
14