Download USER MANUAL - Kramer Electronics

Connecting a PT101DVI DVI Repeater
4
Connecting a PT101DVI DVI Repeater
The example in Figure 2 illustrates how—when connecting a DVI Graphics
source to a VP-724DS Seamless Switcher / Scaler1—you can use the
PT101DVI DVI Repeater to extend the standard DVI transmission range to
15 meters2.
To extend the DVI transmission range using a PT101DVI DVI Repeater, as
the example in Figure 2 illustrates3, do the following:
1. Connect the DVI graphics source (for example, a computer) to the INPUT
connector on the PT101DVI DVI Repeater.
2. Connect the OUTPUT connector on the PT101DVI DVI Repeater to the
DVI VIDEO INPUT on the VP-724DS Seamless Switcher / Scaler.
3. Connect the VIDEO OUT HD15F connector on the VP-724DS to the
video acceptor, for example, a Plasma monitor.
4. Connect the power cord to the VP-724DS.
5. Connect the 12V DC power adapter to the power socket on the
PT101DVI and connect the adapter to the mains electricity.
5
Technical Specifications
Table 2 includes the technical specifications:
4
Table 2: Technical Specifications of the PT101DVI
INPUT:
OUTPUT:
BANDWIDTH (-3dB):
DIMENSIONS:
WEIGHT:
1 DVI5, 1.2Vpp on a DVI Molex 24pin female connector; DDC signal 5Vpp (TTL)
1 DVI5, 1.2Vpp on DVI Molex 24pin female connector; DDC signal 5Vpp (TTL)
>3.3GHz
6 cm x 6.5 cm x 2.5 cm (2.36" x 2.56" x 1") W, D, H
0.14 kg. (0.31 lbs.) approx.
1 The VP-724DS lets you select any one of 8 inputs and scale that input to the output at the set resolution. For full details,
download the latest VP-724DS user manual from the Internet at: http://www.kramerelectronics.com/manuals.html
2 The maximum cable length if connecting the DVI Graphics source directly to the VP-724DS is 5 meters
3 The audio connections are not shown in Figure 2
4 Specifications are subject to change without notice
5 On a DVI-I connector. Note that only the digital signal (DVI-D) is available on the DVI connector
3