Download BreezeMANAGE

Configuring and Managing BreezeACCESS Units
3-86
The User Filter window is comprised of the following components:
♦
Filter Options: Click the up and down arrows to select the
required user filtering option, as follows:
Disable, which means no filtering.
IP Only, which means only IP packets pass.
Enable, which means only messages from IP addresses
defined in the User Filter table pass.
PPPoE Only, which means only PPPoE messages pass.
♦
User Filter Table
To define the IP addresses from which data is permitted to
pass, select a row in the IP Address column and enter the
required IP address in the corresponding text box at the
bottom of the window and click
.
To define a group of addresses, the IP address entered should
be the first address in the range. Then, select either the
adjoining Subnet Mask or Range column and enter the
required value in the corresponding text box and click
. Use the scroll bar to move between the 8 available
entries.
NOTE:
You can only configure either the Subnet Mask or Range.
To delete a filter entry, click the up and down arrows in the
Delete field to select the required entry and click
The available options are 1st Entry to 8th Entry.
To delete all entries in the User Filter table, click Delete All
Entries.
.