Download Proprietary Statement

Base Housing
12. Release the screw on the left bracket of the chassis.
16. Hook the dispenser bar on the brackets of the chassis, positioning it
above the white roller. Ensure that the dispenser bar is paralleled
with the black platen roller and it's long thinner end is at the left.
17. Secure back the screw on the left bracket of the chassis.
18. Guide the sensor cable connector through the hole on the upper left
corner of middle cover.
Dispenser Bar
Screw
Bracket
13. Unlatch the print head module. Hook the white roller on the
brackets of the chassis, ensuring the long thinner end at the left side.
14. Guide the shaft go through the respective holes on the left bracket,
the white roller, and the right bracket in order. (To smooth this
procedure, better hold the white roller with one hand.)
15. Secure the attached screw at right bracket of the chassis to fix the
shaft.
63
Screw
White Plastic Roller
Shaft
64