Download Q-Spot 260-LED QRG - Chauvet Professional
Transcript
Quick Reference Guide Q-Spot 260-LED QRG About this This Q-Spot 260-LED Quick Reference Guide only contains the fixture’s Guide connection and mounting information as well as the menu options and the tables with the DMX values. This document does not replace the product manual. Download the corresponding User Manual, from the CHAUVET® Web site (www.chauvetlighting.com) to learn about the disclaimers, safety notes and technical information as well as the unpacking, maintenance and claiming procedures. Fixture at a Use on Dimmer Glance x Outdoor Use x Sound Activated P P P DMX Master/Slave What is · One Q-Spot 260-LED Included · One IEC power cord with Edison plug · · · Auto Programs Auto-ranging Power Supply Replaceable Fuse User Serviceable Duty Cycle Two mounting brackets One warranty card One Quick Reference Guide Features · 11 or 14-channel DMX-512 LED moving yoke · · · · · · · · · · · · · · · · · Pan: 540° / tilt: 270° Color wheel: 8 colors + white Rainbow color spin at variable speeds Gobo wheel 1: Gobo shake 9 gobos + open Gobo wheel spin at variable speeds Gobo wheel 2: Indexed, rotating gobo wheel with gobo shake 7 slot-n-lock gobos + open 2 glass, 5 metal Rotating gobo wheel spin at variable speeds 3-facet, high-speed rotating prism at variable speeds Variable electronic shutter (for strobing) Variable electronic dimmer (0 – 100%) Remote fixture reset & vector speed channel 255 user-programmable steps without DMX controller Move-in-black for pan/tilt Built-in automated programs Built-in sound activated programs High-powered, 60 W (12.6 A) LED Easy access door for gobo change User-selectable pan/tilt ranges Automatic pan & tilt correction User-selectable basic or advanced operating DMX modes Page 2 of 8 P P P x x Q-Spot 260-LED QRG AC Power This product has an auto-ranging power supply that can work with an input voltage range of 100~240 VAC, 50/60 Hz. Fuse Replacement 1) With a flat head screwdriver, wedge the fuse holder out of its housing and remove the blown fuse from its holder. 2) Replace the blown fuse with a fuse of the exact same type and rating. 3) Insert the fuse holder back in its place, and reconnect power. Gobo Replacement 1) 2) 3) 4) Mounting Unlock the gobo cover and slide it away. Take the target gobo out of the gobo wheel. Install the new rotating gobo. Slide and lock the gobo cover. Before mounting this product, read the safety notes at the beginning of the corresponding user manual and follow the mounting procedures in it. Product Mounting Diagram Control Panel Description Button Function Exits from the current menu or function Enables the currently displayed menu or sets the currently <ENTER> selected value into the selected function Navigates upwards through the menu list and increases <UP> the numeric value when in a function Navigates downwards through the menu list and <DOWN> decreases the numeric value when in a function <MENU> Page 3 of 8 Q-Spot 260-LED QRG Menu Options Main Level nd 2 Level ADDRESS RESET RUN 1. INTRO CHANNELS DISPLAY KEYLOCK INFO PAN TILT 2. INVERT 3. RANGE 4. SPECIAL 5. EDIT 6. Default COLOR USE P/START P/FINISH T/START T/FINISH USE BLACK RESET STEP PAN TILT XYSPEED COLOR GOBO 1 GOBO 2 GOBO 2 ROT PRISM FOCUS DIMMER STROBE TIME USE DEFAULT rd 3 Level Description 001~512 NO/YES DMX512 AUTO 1 AUTO 2 SOUND 1 SOUND 2 CUSTOM TEST SLAVE BASIC ADVANCED 60 CLOSE BRIGHT NO/YES EDITION NORMAL/REVERSE NORMAL/REVERSE STEP LINEAR NO/YES 000~255 000~255 000~255 000~255 000~255 NO/YES DMX SYSTEM 000~255 000~255 000~255 000~255 000~255 000~255 000~255 000~255 000~255 000~255 000~255 000~255 000~255 NO/YES NO/YES Selects a starting DMX address Resets the fixture’s custom settings Selects DMX512-A running mode Selects the first automatic program Selects the second automatic program Selects the first sound activated program Selects the second sound program Selects the user customizable program Selects the fixture’s test sequence Selects the Slave running mode Selects the 11-channel DMX mode Selects the 14-channel DMX mode Turns off the display after 60 s Keeps the display on Activates the control panel password Shows the version of the installed S/W Defines the pan direction Defines the tilt direction The color wheel moves in steps The color wheel moves smoothly Activates the changes Sets the pan start point (restricted range) Sets the pan end point (restricted range) Sets the tilt start point (restricted range) Sets the tilt end point (restricted range) Activates the changes Activates the move-in black delay (3 s) The DMX controller can reset the fixture The control panel can reset the fixture Selects the program step Selects the pan position Selects the tilt position Selects the pan/tilt speed Selects the color (color wheel) Selects a fixed gobo (static or shake) Selects a rotating gobo (static or shake) Selects the gobo rotation mode Selects the prism rotation mode Selects a focus point Selects the dimmer value Selects the strobe frequency and mode Selects the step duration Activates the changes Defaults the fixture to factory settings Default (non-modifiable) password: <UP>, <DOWN>, <UP>, <DOWN> and <ENTER>. Page 4 of 8 Q-Spot 260-LED QRG DMX Values Advanced Channel Function 1 2 3 4 5 Pan Pan Fine Tilt Tilt Fine Pan/Tilt Speed 6 Color Wheel 7 Fixed Gobo Wheel 8 Rotating Gobo Wheel Value 000 ó 255 000 ó 255 000 ó 255 000 ó 255 000 ó 255 000ó 016 017 ó 033 034 ó 050 051 ó 067 068 ó 084 085 ó 101 102 ó 118 119 ó 135 136 ó 152 153 ó 255 000 ó 009 010 ó 019 020 ó 029 030 ó 039 040 ó 049 050 ó 059 060 ó 069 070 ó 079 080 ó 089 090 ó 099 100 ó 114 115 ó 129 130 ó 144 145 ó 159 160 ó 174 175 ó 189 190 ó 204 205 ó 219 220 ó 234 235 ó 255 000 ó 009 010 ó 019 020 ó 029 030 ó 039 040 ó 049 050 ó 059 060 ó 069 070 ó 079 080 ó 099 100 ó 119 120 ó 139 140 ó 159 160 ó 179 180 ó 199 200 ó 219 220 ó 255 Page 5 of 8 Percent/Setting 0~540º Fine movement control 0~270º Fine movement control Fast~Slow White Red Yellow Magenta Green Orange Blue Light blue Light green Rainbow or linear effect No gobo Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 8 Gobo 9 Shaking gobo 9 Shaking gobo 8 Shaking gobo 7 Shaking gobo 6 Shaking gobo 5 Shaking gobo 4 Shaking gobo 3 Shaking gobo 2 Shaking gobo 1 Flow effect No gobo Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Shaking gobo 7 Shaking gobo 6 Shaking gobo 5 Shaking gobo 4 Shaking gobo 3 Shaking gobo 2 Shaking gobo 1 Flow effect Q-Spot 260-LED QRG Advanced (Cont.) Basic Channel Function 9 Gobo Rotation 10 Rotating Prism 11 12 Focus Dimmer 13 Strobe 14 Control Channel Function 1 2 Pan Tilt 3 Color Wheel 4 Fixed Gobo Wheel Value 000 ó 060 061 ó 158 159 ó 255 000 001 ó 004 005 ó 127 128 ó 132 133 ó 255 000 ó 255 000 ó 255 000 ó 031 032 ó 063 064 ó 095 096 ó 127 128 ó 159 160 ó 191 192 ó 223 224 ó 255 000 ó 019 020 ó 039 040 ó 059 060 ó 079 080 ó 099 100 ó 119 120 ó 139 140 ó 159 160 ó 179 180 ó 199 200 ó 219 220 ó 255 Value 000 ó 255 000 ó 255 000 ó 016 017 ó 033 034 ó 050 051 ó 067 068 ó 084 085 ó 101 102 ó 118 119 ó 135 136 ó 152 153 ó 255 000 ó 009 010 ó 019 020 ó 029 030 ó 039 040 ó 049 050 ó 059 060 ó 069 070 ó 079 080 ó 089 090 ó 099 100 ó 114 Page 6 of 8 Percent/Setting Gobo indexing CW rotation (Slow~Fast) CCW rotation (Slow~Fast) No function Prism engaged (no rotation) CCW rotation (Slow~Fast) No function CW rotation (Slow~Fast) Dark~Bright Close Open Strobe (Slow~Fast) Open Pulse strobe effect (Slow~Fast) Open Random strobe effect (Slow~Fast) Open No function Pan/tilt black activation (3 s delay) Pan/tilt black deactivation (3 s delay) Auto 1 (3 s delay) Auto 2 (3 s delay) Sound 1(3 s delay) Sound 2(3 s delay) Custom Test (3 s delay) No function Reset (3 s delay) No function Percent/Setting 0~540º 0~270º White Red Yellow Magenta Green Orange Blue Light blue Light green Rainbow or linear effect No gobo Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 8 Gobo 9 Shaking gobo 9 Q-Spot 260-LED QRG Basic (Cont.) Channel Function 4 (Cont.) 5 Rotating Gobo Wheel 6 Gobo Rotation 7 Rotating Prism 8 9 Focus Dimmer 10 Strobe 11 Control Value 115 ó 129 130 ó 144 145 ó 159 160 ó 174 175 ó 189 190 ó 204 205 ó 219 220 ó 234 235 ó 255 000 ó 009 010 ó 019 020 ó 029 030 ó 039 040 ó 049 050 ó 059 060 ó 069 070 ó 079 080 ó 099 100 ó 119 120 ó 139 140 ó 159 160 ó 179 180 ó 199 200 ó 219 220 ó 255 000 ó 060 061 ó 158 159 ó 255 000 001 ó 004 005 ó 127 128 ó 132 133 ó 255 000 ó 255 000 ó 255 000 ó 031 032 ó 063 064 ó 095 096 ó 127 128 ó 159 160 ó 191 192 ó 223 224 ó 255 000 ó 019 020 ó 039 040 ó 059 060 ó 079 080 ó 099 100 ó 119 120 ó 139 140 ó 159 160 ó 179 180 ó 199 200 ó 219 220 ó 255 Page 7 of 8 Percent/Setting Shaking gobo 8 Shaking gobo 7 Shaking gobo 6 Shaking gobo 5 Shaking gobo 4 Shaking gobo 3 Shaking gobo 2 Shaking gobo 1 Flow effect No gobo Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Shaking gobo 7 Shaking gobo 6 Shaking gobo 5 Shaking gobo 4 Shaking gobo 3 Shaking gobo 2 Shaking gobo 1 Flow effect Gobo indexing CW rotation (Slow~Fast) CCW rotation (Slow~Fast) No function Prism engaged (no rotation) CCW rotation (Slow~Fast) No function CW rotation (Slow~Fast) Dark ó Bright Close Open Strobe (Slow~Fast) Open Pulse strobe effect (Slow~Fast) Open Random strobe effect (Slow~Fast) Open No function Pan/tilt black activation (3 s delay) Pan/tilt black deactivation (3 s delay) Auto 1 (3 s delay) Auto 2 (3 s delay) Sound 1(3 s delay) Sound 2(3 s delay) Custom Test (3 s delay) No function Reset (3 s delay) No function Q-Spot 260-LED QRG Programming Notes Contact Us To make the steps of the custom program to run in an endless loop, set the TIME value of the last step to “0”. This will tell the fixture to start over from the first step. General Information CHAUVET® 5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 929-1115 Fax: (954) 929-5560 Toll free: (800) 762-1084 Technical Support Voice: (954) 929-1115 (Press 4) Fax: (954) 929-5560 (Attention: Service) World Wide Web www.chauvetlighting.com Q-Spot 260-LED - QRG – Rev. 02 © Copyright 2010 CHAUVET® All rights reserved Printed in the P. R. C. Page 8 of 8