Download User Manual

CAS 750 Monitor
SpO2
SpO2 Module
A failure occurred on the SpO2 board. The monitor needs to be
serviced.
•
Press the ALARMS key. The monitor silences the audio alarm
tone, but the visual messages remain.
SpO2 Probe OFF
The monitor is no longer receiving a patient signal from the SpO2
probe. The probe is no longer in contact with the patient.
21-02-0289 REV. 00 09/06
•
Press the ALARMS key. The monitor silences the audio alarm
tone, but the visual messages remain.
•
Check if probe is properly applied to the patient.
•
Check if probe cable is connected to extension cable.
•
Check if cable is attached to monitor.
•
Replace probe and/or cable.
Page 69