Download user manual - Prasaditi Medical Equipments
Transcript
USER MANUAL FOR ELBOW CPM Innova has an ON-OFF switch on the front side of the machine body, a digital display on top, a four keys pad below it and a panic key. Four keys on key pad are DEL, UP, LOW and NEXT. 1) Whenever we switch on the machine It displays If the splint is not at zero position, it will take initialization first. After getting the splint at zero degrees it displays 2) Then it displays Here press and hold UP key to bring the lower splint up so as to suit the deformity angle of patient OR press LOW key to bring splint down. Adjust splint so as the patient can put his/her hand comfortably on splint. It will displays the current splint angle- 3) Adjust length of splint so that patient can grip the front handle comfortably, and height of stand as per the comfort of patient. Put straps to fix hand on both splints firmly and press NEXT key It displays Press UP/ LOW keys to set desired flexion angle and press NEXT key. Pressing UP key once will increase angle by one degree, similarly LOW will decrease angle by one degree. To skip flexion press NEXT directly keeping current position XXX. 4) Now it displays Press LOW key to set desired extension angle and press NEXT key 5) It displays Press UP/ LOW keys to set desired angle and press NEXT key To skip supination and pronation press NEXT key directly on 000DEG 6) It displays TREATMENT TIME 020 MIN (MAX 60) Press UP/ LOW keys to set desired timer and press NEXT key to start the process. Here on this screen of treatment time you can vary speed and adjust hold time. To do so press and hold DEL key for three sec. 7) It will display SPEED MEDIUM Press UP to set FAST speed or press LOW to set SLOW speed. Select speed and press NEXT key. 8) It will display hold time HOLD TIME 03 SEC (MAX 10 SEC) Press UP/ LOW keys to set desired HOLD TIME and press NEXT key. It will again display the TREATMENT TIME menu. When you will press NEXT on TREATMENT TIME menu the process will get started. 9) You can terminate the process in between by pressing DEL, it will stop after completing ongoing cycle. Always handover panic key to patient which will help him in unbearable pains. Use ON-OFF switch directly in any extreme conditions to switch OFF the supply. In that case do remember to remove hand of patient before switching it ON again, as it will take INITIALIZATION first and become completely straight.