Download User Manual

Installation
3.5 Installation of outdoor unit
Please add rubber absorber under the outdoor unit, to
reduce the vibration.
Rubber absorber
Bottom case
1) Use a screwdriver to remove the screws on the right service panel and front service
panel of the outdoor unit, and then remove both the panels.
2) Pass the power cable from the indoor unit through the cable gland on the backside of
the outdoor unit, and connect it to the terminals of the outdoor unit.
Attention:
When connecting the power cable between the outdoor unit
and indoor unit, cables connected to the terminal block in
indoor unit should be coincide with that in outdoor unit. For
example, if the teminals and power cables are connected as
yellow cable L red cable N blue cable S
black cable in indoor unit, the connections in the outdoor unit
should be in the same way.
18