Download Operator`s Manual

Preface
The sign specifies:
Product, type, date of manufacture, weight, reference and
serial number.
The type (1), serial number (2) and date of manufacture (3)
must always be quoted during service questions or when
spare parts are needed.
A. Type - model
B. Serial number
C. Date of manufacture
A
C
B
Fig.3 Machine sign.
Cylinders, valves, control cables and hoses are also
equipped with machine signs or punched/printed order
numbers.
Fig.4 Marking of components, e.g., cylinder.
When ordering replacement control cables, please specify
the control cable length (L) and make of control valve.
L
Fig.5 Indicate length when ordering control cable.
1.3 Alignment reference
Throughout this operator's manual, references to the
right and left are seen from the operator's seat in forward
direction.
4
72074
Note.Some illustrations in this operator's manual may show
a different model of tractor or loader, compared with your
loader. The same information applies to your equipment
unless otherwise specified, however.