Download "user manual"

Transcript
1.3 Connection the P1212
1.3.1 Connecting the power supply
• It must be connected to a circuit with a thermal-magnetic cut-off switch.(see appendix page 1,
2, 3)
• Make certain that the cross-section of the socket's cables is sufficient for the power absorbed
by the unit.
• Should it be necessary, replace the fuses with others of the same type and value.
• It's inadvisable to use adapters, in-line connectors or extension cables. Should their use be
indispensable, make certain they're in compliance with current safety norms regarding
component quality and cable length/cross-section.
Powerlight 1212 version1.01
Attention! Class 1 unit. The ground conductor must be part of the power cord
GB
I
D
F
E
appendix
7