Download User Manual - LUCKINSlive

ATV 31 for MFBs
Section 11.4
Tuning the ATV 31
Tuning the ATV 31
Tuning the ATV 31 with PowerSuite
In Advance
We recommend tuning the axis kinematic before the program automatically starts it.
Tuning Example
The following table gives an example of kinematic tuning:
Step
Action
1
Connect (see page 138) to the ATV 31.
2
After a connection and transfer of the device’s configurations, PowerSuite opens a new window with the
configuration screen, which gives access to device control, tuning and monitoring functions.
The following figure shows part of the new window. This lower window provides access to ATV 31
command functions:
3
Place the Command zone cursor on Active.
4
Click the Reset button to clear any problems (if status is red).
5
Enter the value 1 in the Frequency reference zone.
6
Click the Test Run button.
Result: the motor runs and the sub-window is animated:
7
Place the Command zone cursor on Inactive once tuning has been finalized.
35013563 10/2014
143