Download WEBster - Alcorn McBride

Transcript
Table of Events:
Here you will find the events in the WEBster you can schedule. For a
detailed discussion see the previous Events in Detail section.
Delimiter
Field 1
Field 2
Field 3
Field 4
SendString
String
Acknowledgment
string to look for*
Timeout in seconds
before retry or
failure*
Number of
retries*
StartSequence
<sequence index>
N/A
N/A
N/A
SetVarEQ
<variable index>
<value>
N/A
N/A
On
<output or flag index>
N/A
N/A
N/A
Off
<output or flag index>
N/A
N/A
N/A
DefaultWebPage
<pagename>
N/A
N/A
N/A
* optional parameter
Indices for sequences, variables, flags, and outputs:
WinScript refers to resource as resource+1 , like variable0 as variable1,
variable12 as variable13,etc…, so don’t let this confuse you.
Resource
Field 1
Sequence
0x00 – 0xFF
State Variable
0x00 – 0x1F
Output
0x00 – 0x3F
Flag
0x40 – 0x7F
Fields in Detail
There is a summarized table in the File Format/Tutorial section that lists all
the fields for your reference. Since the Event, and event Parameter fields
(E:, 1:, 2:, 3:, and 4: ) have been been discussed in detail in the Events in
Detail section, we’ll discuss the rest of the fields here.
T: Start Time
The Start Time is the hour and minute your event becomes active. For most
cases being active simple means gets executed. You specify it in military
time 00:00 is midnight, 23:59, 11:59pm, is last minute of the day something
can be scheduled. You can specify the word BOOT as the field’s value. This
used to make an event get executed upon every reboot after the start time and
start day have been reached.
Example:
T:13:30
T:Boot
November 2, 2005
• Alcorn McBride WEBster User’s Manual
•
Rev 1.9
•
Page 61