Transcript
Manufacturer: MK-dent GmbH Eichenweg 7b D-22941 Bargteheide Germany Contact: Tel.: Fax: email: Internet: 04532 400 49 -0 04532 400 49 -10 [email protected] www.mk-dent.com User Manual MK-dent LED BU8012EM Technical Data Art.Nr. Luminance BU8012EM 3,0V - 3,5V (best light with 3,2V) Installation i The MK-dent LED works with direct current, that means the LED has two different poles. If the LED does not work after installation, you need to re/insert the LED after rotating it 180°. To achieve the optimal luminance, we recommend a voltage of 3,2 V. Push button 1 and pull off sleeve 2 socket and take it out. Press the porter 4 to the body 5. Push the LED 3 with a screw driver in direction of arrow out of the socket. Take it out. Place the new LED in the socket. Pay attention to the correct position of contacts. Push the LED into the socket and reattach sleeve. Turn LED 180º, in case it doesn´t light. WARNING Risk of injury by high heat addition WARNING Do not touch the LED during use. Rev. A/09_2014 File: LED_BU8012EM_EN.indd