Download Operations Manual

Transcript
Options
In the Options menu point, the language can be changed, the vibrating
alarm can be activated or deactivated and the latching and auto save
features can be turned on or off.
>> - Moves to the next parameter
SELECT - Selects the blinking parameter
EXIT - Back to system menu
Latching Alarm Function
The detector is shipped with the latching alarm function disabled. If the
alarms are set to latch, the audible and visual alarms will persist until the
alarm is acknowledged by pressing the center key (RESET). To enable
latching alarms, press the left key (↓↓) until Latching is highlighted. Press
the center key (CHANGE) to enable latching alarms.
Sensor – Enable
Each individual sensor can be activated or deactivated for each
measurement. This function is necessary for applications in which a gas
does not need to be measured or if the G460 will be upgraded with different
sensors.
ON or OFF indicates the status of the
sensor (active or inactive).
↓↓ - Scroll down
On/Off - Turns sensor on or off
Exit
- Return to system Menu
18