1
Download CC-Link IE Field Network High-Speed Counter Module User`s Manual
Transcript
Address Type Decimal Description Hexadecimal 6016 to 6049 1780H to 17A1H Cam switch output 6 6050 to 6143 17A2H to 17FFH System area 6144 to 6177 1800H to 1821H Cam switch output 7 6178 to 6271 1822H to 187FH System area 6272 to 6305 1880H to 18A1H Cam switch output 8 6306 to 6399 18A2H to 18FFH System area 6400 to 6433 1900H to 1921H Cam switch output 9 6434 to 6527 1922H to 197FH System area 6528 to 6561 1980H to 19A1H Cam switch output 10 6562 to 6655 19A2H to 19FFH System area Cam switch function 6656 to 6689 1A00H to 1A21H Cam switch output 11 parameter data 6690 to 6783 1A22H to 1A7FH System area 6784 to 6817 1A80H to 1AA1H Cam switch output 12 6818 to 6911 1AA2H to 1AFFH System area 6912 to 6945 1B00H to 1B21H Cam switch output 13 6946 to 7039 1B22H to 1B7FH System area 7040 to 7073 1B80H to 1BA1H Cam switch output 14 7074 to 7167 1BA2H to 1BFFH System area 7168 to 7201 1C00H to 1C21H Cam switch output 15 7202 to 7295 1C22H to 1C7FH System area 7296 to 7329 1C80H to 1CA1H Cam switch output 16 7330 to 8191 1CA2H to 1FFFH System area Default*1 Read/ Write*2 Same as Cam switch output 1. ⎯ ⎯ Same as Cam switch output 1. ⎯ ⎯ Same as Cam switch output 1. ⎯ ⎯ Same as Cam switch output 1. ⎯ ⎯ Same as Cam switch output 1. ⎯ ⎯ Same as Cam switch output 1. ⎯ ⎯ Same as Cam switch output 1. ⎯ ⎯ Same as Cam switch output 1. ⎯ ⎯ Same as Cam switch output 1. ⎯ ⎯ Same as Cam switch output 1. ⎯ ⎯ Same as Cam switch output 1. ⎯ *1 This is the value at default or initialization by Parameter area initialization command (address: 1002H). *2 This shows whether read or write from programs is possible. R: Readable W: Writable ⎯ The extended parameter data is written to a nonvolatile memory at the rising edge (off to on) of Initial data setting request flag (RY9) or when the parameters are set on the parameter setting window. However, the extended parameters cannot be set on the parameter setting window. Set the extended parameters from the program before setting parameters on the parameter setting window. The activation timing of the extended parameter data differs depending on the data type. Refer to the pages where details of each data are described. 50
