Download User manual - LUCKINSlive

Section 12.3
Entering Configuration Parameters Using Unity Pro
Entering Configuration Parameters Using Unity Pro
Subject of this Section
This section presents the entry of various configuration parameters for analog input/output
channels using Unity Pro.
NOTE: For the communication between the channels and the CPU there is the logical nodes. Each
logical node includes two channels. So when you modify the configuration of analog modules, the
new parameters are applied for both channels of the logical node, Unity messages will inform you
of this modification.
What Is in This Section?
This section contains the following topics:
Topic
226
Page
Selecting the Range for an Analog Module’s Input or Output
227
Selecting a Task Associated to an Analog Channel
228
Selecting the Input Channel Scan Cycle
229
Selecting the Display Format for a Current or Voltage Input Channel
230
Selecting the Display Format for a Thermocouple or RTD Input Channel
231
Selecting the Input Channels’ Filter Value
232
Selecting Input Channel Usage
233
Selecting the Overflow Control Function
234
Selecting the Cold Junction Compensation
236
Selecting the Fallback Mode for Analog Outputs
237
35011978 10/2014