Download User manual - LUCKINSlive

Description of the application
Operating Mode
The operating mode is as follows:










302
A potentiometer is used to defined the desired level.
A Start Cycle button is used to start the filling.
When the desired level of the tank is reached, the pump stops and the Tank ready led lights up.
A Drain tank button is used to start the tank draining.
When the low level of the tank is reached, the valve closes. The Start Cycle button is used to
restart the filling.
A Stop Cycle button is used to interrupt the filling. Pressing this button allows you to set the
system to a safe level. The pump stops and the valve opens until the low level is reached (tank
empty). The valve closes.
The pump has a variable flow rate, the value of which can be accessed by the operator screen.
The more the level of liquid is raised, the more the flow is reduced.
The flow rate of the valve is fixed.
A safety measure must be installed. If the high level is exceeded, a safety measure is activated
and the system is set to failsafe. The pump then stops and the valve opens until the low level is
reached (tank empty). The valve closes.
For failsafe mode, an error message must be displayed.
The time that the valve is open and closed is monitored, with an error message being displayed
if either of these is exceeded.
35011978 10/2014