Download User Manual

Transcript
Use the Options menu
Before capturing a still image or video clip using any capture
mode, click Menu > Options to access the Options screen.
The Options screen allows you to configure capture settings.
You can configure the following settings on the Options screen.
Option
General
Experiencing Multimedia
7
Counter
Photo
Video
Modes
About
Allows you to
Specify the storage location, make flicker adjustments,
enable preview, and disable shutter sound.
Reset counters for captured photos and video clips.
Configure settings for image quality, specify image file
naming conventions, specify a location for the folders
containing templates, and enable date and time stamp in
images you capture.
Enable/Disable audio recording while capturing a video
clip, and specify video file naming conventions.
Switch capture modes and configure settings for each mode. You
can configure the following settings:
• The encoding format and resolution for Photo capture mode.
• The encoding format, resolution, and recording limit for Video
capture mode.
• The encoding format and resolution for MMS Video capture
mode.
• The encoding format for Contacts Picture and Picture Theme
capture modes.
View the program version and copyright information.
Use the Review screen
When you click Menu > Options > General on the Camera
screen, you will see that the Review after capture check box
is selected by default on the General screen to allow you to
view the image or video clip after it has been captured.
The title bar of the Review screen indicates Zoom or Pan
mode. Press ENTER to switch between these two modes. The
Camera[Zoom] mode allows you to click
and
to zoom in
and zoom out the preview, while the Camera[Pan] mode allows
you to pan and position a large picture in the display area by
using the NAVIGATION control.
118