Download Power Panel Real World Cerrtifier
Transcript
Power Panel This Power panel has all of the features of the standard unit plus the ability to connect between 2 devices (“inline”). Inline connections allow passing PoE power to the device and displays power draw (in watts). - Network devices: Indicates advertised speed, duplex, & pairs, Phone: Indicates voltage amplitude & pairs used, PoE: Indicates voltage amplitude (discovery & full), pairs used (end or mid span) & watts (when connected inline) - Force link button: Sends link pulses to prompt communication from network devices. Test PoE button: Simulates a VoIP phone or camera and prompts PoE power - Detect DSL tone (DSL model only): Indicates presence of DSL digital tone - Connect “Inline” (Inline model only): Connect between 2 devices and pass through PoE power to the device allowing you to monitor an active system Measure power draw of the PoE device (in watts) - Locate wire using tone (Tone Star model only) Detect tone placed on the wires by the Power Panel main unit. Power Panel DVM Models to choose from: - Standard unit (POE1000): Packed with features for sesing what is on a Cat5/6 cable (switches, phones, PoE power) plus interacts with these devices. - DSL Unit (POE1000DSL) All of the features of teh standard unti plus the ability to sense DSL tones. - Inline unit (POE1000IL) The most popular Power Panel Cat5/6 DVM model has all the features of the standard unit plus the ability to connect between 2 devices (“inline”). Inline allow passing PoE power to the device... monitoring the device while it is ON. Plus the inline Power Panel measures & displays power draw (in watts). - Tone Star Unit POE1000ILT: All the features of the inline unit plus we add our full features, filter probe. The probe is used as a wire locator to audibly trace the tone placed on teh wires by the power panel main unit. It features a tone button, volume control, ultrabright LED lighted tip, and 2 status LEDs: One to visually identify the tone and the other to warn you that there is 60hz present in teh area. The probe is filtered to minize fluorescent hum Product Includes: - Power Panel CAT5/6 DVM - 9V Battery POE1000 POE1000DSL POE1000IL POE1000ILT Real World Cerrtifier - Illustrated Users Manual - Warranty: 1 Year parts and labor - Made in the U.S.A Power Panel DVM Standard Model (Single Jack) Power Panel DVM Standard Model with DSL Sensing (Single Jack) Power Panel DVM inline, Power Sensing (Double Jack) Power Panel DVM Tone Start, POE1000ILwith lighted probe $115.00 $170.00 $130.00 $165.00 Performance, Certify, and Troubleshoot LAN Hardware and Cabling (10MB, 100MB, Gigabit) The RWC100 takes you far beyond typical LAN and Cable testing. Now you can perform all of your standard cable tests plus “Type” your cable (CAT 3, 5, 5E, 6) and perform real speed tests on cables, switches, hubs, and PCs. With results displayed on easy-to-read graphs! Plus, store the test for later printing. - Speed Tests (10MB, 1000MB, Gigabit): - Real world Cert Level 1 (Projected) - Real World Cert Level 2 (Confirmed) - Cable typing (CAT 3, 5, 5E, 6) - Displays Port speed, duplex, data level of all pairs - Inline Port Mode (negotiated results) - Port beacon (locate port) - Cable Length (real 1 nanosecond TDR) - Opens, shorts, split pairs, splits distance - Next, Next, (far), Skew, Propagation delay - Attenuation, Hot Splits - Multi-pair Toner/Probe - Stores 250 tests for later printing Benefits: - Certify & troubleshoot all LAN hardware & cabling. - Compatible with all 10MB, 100MB, & Gigabit Networks! - Test existing cables for higher speed compatibility - Spot faulty wiring closet jumpers from your wall outlet - Detect worn connectors and faulty terminations. - Identify excessively noisy cables - Decode 10/100/GIG PCs, switches & hubs - Go between 2 LAN devices & identify the speed - Test 10/100/Gigabit PCs, switches & hubs for signal - Perform your own inspection on new devices and cables - Identify network bottlenecks caused by slow links - Print “Receipt” to document test results Product Includes: - RWC1000 Main Unit - RWC1000 Remote Unit - Cat5e Patch Cables (2) - Protective Case (Zippered) - Documentation Tablet - “Passed” Stickers (64) - 9V Battery (2) - Instructional DVD - Illustrated Users Manual - Warranty: 1 year parts and labor - Made in the U.S.A RWC1000K Major Credit Cards Accepted Real World Certifier 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $430.00 51 LanXPLORER PRO LanXPLORER PRO is an outstanding In-Line Active and Passive network tester from IDEAL INDUSTRIES, INC. It offers unsurpassed test capability for Local Area Network management with state-of-the-art touchscreen interface and large clear color display. LanXPLORER PRO is a high quality, powerful, convenient and easy to use tester unrivalled by any other product available today. With full In-Line and Endpoint test capabilities, LanXPLORER PRO tests not only copper cables but also active LAN connections over copper and fiber links. In addition, it liberates the user from cables by allowing most tests to be conducted through a wireless connection offering unparalleled flexibility. With such comprehensive test capability and ease of use, LanXPLORER PRO is the perfect tool to meet the needs of IT installers & systems administrators in any enterprise, campus or industrial Ethernet environment. - Lanxplorer Pro Key Features Troubleshoot passive cabling and active networks Touch-n-test user interface Copper, fiber and Wi-Fi testing Peak, instant, 30-second, & continuous bandwidth monitoring PoE and PoE+ endpoint and in-line testing with load simulation Device discovery and top-talker identification A quick glance at the Lanxplorer Pro - Network Tests over Copper & Fiber - Identification of active devices with Network Discovery function - Comparison of active network devices against historical data with Network Verify - DHCP client, Ping and Traceroute tests with VLAN support - Full bandwidth Layer 1,2,and 3 Loopback device - Diagnostic statistics including Top Ten talkers, protocols, error generators and packet size distribution - Copper Features Best-in-class Wiremapper - tests cables by pin as well as by pair with split pair detection and length measurement Wire tracing function in combination with an Amplifier Probe Detection of PoE and PoE+, with voltage, current and power measurements in endpoint and In-Line modes Hub blink test with color-switching on supported devices 10/100/1000 BASE-T support Network monitoring with In-Line tests and PC diagnostics function - Optical Fiber Features Singlemode and Multimode SFP options 1000 BASE-SX, LX and ZX support Link LED blink for visual tracing Monitoring of VoIP calls and quality, including RTP Jitter - Wi-Fi Features Identification of active network devices with Network Discovery function Comparison of active network devices against historical data with Network Verify DHCP client, Ping and Traceroute tests with VLAN support 802.11 b,g and n support Identification of access points, Service Set Identifiers (SSID), channels in use, signal strength and security settings - Detection of channel conflicts - - Lanxplorer Pro Functions Advanced Wiremap and Wire Trace PoE / PoE+ testing Network Discovery Network Verify DHCP, Ping, Traceroute, VLAN Endpoint LAN Testing over Copper LAN Testing over Wi-Fi In-Line LAN Testing over Copper with VolP Monitor, PC Diagnostics & PoE / PoE+ Loopback Mode LAN Testing over Optical Fiber Touchscreen USB Interface & Internal Memory Internal memory for up to 100 tests in XML format. Job manager for efficient organization of results. Data exportable to PC via USB flash drive. The LanXPLORER™ redefines ‘Simplicity of Use’. Through its state of the art QVGA 3 ½” Colour Touchscreen display, the LanXPLORER™ replaces the complex menu navigation of existing products with a revolutionary Touch ‘n’ Test system. Testing with LanXPLORER is simple and fast. Results are easy to interpret through its high resolution graphic display. Touch ‘n’ Test Virtual Keyboard High Definition Touchscreen menu navigation allows tests to be completed within three steps Virtual Keyboard allows easier and much faster data input Crystal clear graphical interpretation of results like Wiremap through large 3 ½” QVGA color display 33-942P LanXPLORER PRO - Premium Package: $3195.00 Package Includes Touch Screen, Dual RJ-45 ports, Wi-Fi, single SFP: Includes soft carrying case, 2 RJ-45 STP patch cords, 1 smart remote, printed quick reference guide, manual on CD, rechargeable battery pack, AC power supply, inductive cable tracing probe 52 Datacomtools.com TM Options and Accessories 33-940-BP LanXPLORER, NiMH Battery Pack 33-940-R1 LanXPLORER Active Remote #1 33-940-R12 LanXPLORER Active Remote #2-12 33-940-RJ45 LanXPLORER RJ45 Tool & 10 Inserts 33-940-PS LanXPLORER Power Supply, 2.5A SFP-850-1 LanXPLORER 1000Base-SX Fiber Option SFP-1310-1 LanXPLORER 1000Base-LX Fiber Option SFP-1550-1 LanXPLORER 1000Base-ZX Fiber Option $95.00 $40.00 $425.00 $145.00 $91.00 $155.00 $395.00 $755.00 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply VDV PRO The VDV PRO Cable Tester is a cable testing and verification device that can test all wiring requirements throughout today’s residential and commercial environments. - Network link LED blink for visual cable tracing - Voice testing capability detects RJ-11 (1, 2, or 3 pair) - Voice test also shows Normal or Reverse for pins 1 through 6 - Length measurement is shown during initial test results for convenience and time savings - Eight remotes have RJ-45, RJ-11 and Coax F-jacks for increased testing capabilities - Tests for shield continuity, shorts, opens, miswires, reversals and split pairs with remote connected - Full dot-matrix LCD display for user convenience to read display results - One-ended testing for shorts, opens and split pairs (no remote needed) - Test results displayed in wire map format with message line for shorts and split pairs - Will display wire map for 10Base-T and Token Ring with remote connected - UTP, STP, and Coax length measurement in feet or meters using cable capacitance method - Coax mapping with up to eight color coded coax remotes. - Tone generator mode sends four different tones on all conductors, selected pair or selected pin - Auto-off in any mode and low power consumption for long battery life - Identifies presence of voltage on cables 33-770 33-771 33-774 33-780 33-775 VDV MultiMedia Cable Tester VDV PRO w/one remote and terminator VDV PRO w/eight remotes and terminators VDV PRO Eight Remote Kit (ID 1-8) VDV Pro w/one remote and probe Eight Coax Terminator Kit $240.00 $330.00 $125.00 $275.00 $36.95 The VDV MultiMedia Cable Tester is an easy-to-use cable testing and verification device that can quickly test all wiring requirements found throughout today’s residential and commercial environments. The VDV MultiMedia Tester makes it a snap to quickly verify wiring integrity and assure proper terminations for diverse types of networks. Voice – tests 3-pair USOC and 6-position RJ11/12 jacks for voice cable testing Data – tests both shielded and unshielded cable testing to T568A/B (RJ45) Video – tests coax cable for opens and shorts with F-Connector interface - Comprehensive testing for Voice, Data and Video applications. - Designed for testing in residential and commercial environments. - Supports RJ11/12, RJ45, and coax F-Connector cabling and interfaces. - Easy-to-read LCD display with PASS/Miswire indicators, wiremap display and troubleshooting modes. - Multi-tone support for cable tracing and fault isolation. - Convenient internal storage for remote. - Capacity to support additional remotes 33-856 IENet™ PRO VDV Multimedia Cable Tester Kit $105.95 The tester features a unique easy-to-use cable test for 2 pair and 4 pair Industrial Ethernet cabling. With shielded 2 pair, M12 and RJ-45 ports, the IENet™ PRO is compatible with most Industrial Ethernet cabling. Test results are displayed in the PROFINET® Industrial Ethernet required format. - Simple selection between Voice, 2 & 4 pair Data, & Coax testing functions (Voice & Video/Security tests via adapters) - Tests for opens, shorts, miswires, reversals, split pair (user selectable) and length - Indicates correct wiremap to T568A/B standards for shielded and unshielded cabling - Easy-to-read LCD display with “PASS” or “Miswire” indicator for each test - Identifies presence of voltages on cables - Tone generator supports four different tones making fault isolation easier - Integrated remote unit to make storage and carrying easier - Can support additional optional remotes making it efficient for one person testing - Network LED blink for visual cable tracing - Numerical indication for UTP “No Shield” and STP - “Shield” to comply with industrial ethernet PROFINET® requirements 33-772 33-773 33-775 33-776 Major Credit Cards Accepted IENet™ PRO w/single remote IENet™ Pro w/eight remotes Eight Coax Terminator Kit IENet™ Pro Eight Remote Kit (ID 1-8) 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $325.00 $510.00 $36.95 $268.00 53 PC Cable-Check Pro This new universal tester maps cables, detects good connections, opens, shorts or crosses. It works with over 20 types of cables including: LAN & telephone, Serial, coaxial, USB, VGA, Mini-USB, S-video, FireWire, PS/2 keyboard & parallel printer. - Auto scan or manual scan modes - Rubber feet to grip to desk to prevent slipping - Power shuts off after 30 seconds of non-use - Rugged case now with built-in handle for transport - 9V battery included - Tests cables with the following terminations: - Modular plugs: RJ45, RJ11, RJ12 UTP/STP 1577 LAN ProNavigator Tester & Kit PC Cable-Check Pro $154.85 If you’re a technician on the go, you need the LAN ProNavigator™ from Paladin Tools! Two-piece tester includes main unit and remote with test results at both ends. - One-button, simple testing (PASS/FAIL or fault find) - Traces wires with tone & remote lights - Quick fault analysis on coax & data cables - CAT-5, CAT-5e or CAT-6 (UTP/STP) cable testing - Detects opens, shorts, crossed wires & split pairs - Compact & lightweight, comfortable to hold - Test status lights at both ends (Main unit & remote) - Designed & manufactured in the USA 1543 901066 Data/Link ID and Cable Check - Coaxial: BNCs & CATV “F” (BNC-to-F adapter required; not included) - D-sub: 9-, 15- & 25-pin - HD-sub: 15-pin - USB: A, B, & mini 5-pin - 1394 FireWire: 4- & 6-pin - Centronics: 36-pin printer 1543 includes: Test set (main & remote), 2 RJ45 patch cords, 2 belt clips 901066 includes: Test set (main & remote), 2 RJ45 patch cords, 2 BNC coaxial cables, 2 CATV “F”to BNC adapters, 1BNC/BNC adapter, 1 dhielded RJ45 coupler, 2 belt clips in durable case LAN ProNavigator Tester LAN ProNavigator Test Set Kit $89.00 $134.75 This tester maps UTP, STP, and flat satin cables with RJ45 terminations to identify good connections, opens, shorts, and crosses and the unit also identifies network activity and transmission speeds. - Cable mapping function tests data & phone connection schemes including patch cords & installed cables - Identifies cross-over telephone connections - Detects PC (NIC) & HUB data transmissions and PC (NIC) & HUB NLP or FLP link pulse - Identifies data & link transmission speeds with real time detections: 100 MB or 10 MB - Automatically scans with choice of slow or fast speeds - Low battery detection on LAN ID tester - One-year warranty Kit Includes: (2) RJ45 patch cords, 9V battery included, A durable nylon carrying case with belt loop 1576 LAN Cable-Check Data/Link ID and Cable Check $58.00 Test continuity of RJ45 data and telephone connection schemes on patch cords or on installed cable runs to identify: good connections, opens, shorts and cross-connections. - Identifies cross-over telephone connections - Automatically scans when cables are connected and unit turned on - Two scan speeds: fast or slow - Map connector and cable pin-out - Tests cable up to 1,650 feet or 500 m - Also tests R11 connections using an RJ11 adapter (Not Included) - One-year warranty Kit includes: (2) RJ45 patch cords, 9V battery included, A durable nylon carrying case with belt loop 1574 54 Datacomtools.com TM LAN Cable-Check $28.35 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply Tone & Probe Plus Cable Check The tester also provides full-range continuity testing, line condition, signal tracing & wire identification with tone generator and tone probe cable tracer capabilities. RJ45 LAN Tester identifies - Good Connection, Opens, Shorts and Crosses - Connector and Cable Pin-Out - Clear LED Display for Each Pin and Shield - Shielded RJ45 Modular Plug Socket - Display of mapping w/dual speeds slow or fast - Tests RJ11 and RJ45 Cables with Runs up to 600’ Telephone Test Set and Tone Probe Cable Tracer - View telephone line status: Dial tone, ringing or busy - Provides talk power for telephone lines and butt set use - Selectable Dual/Single Tone Application for Circuits - Four Tone Generator Patterns - Test Continuity of Wires, Cables and Loads - Tone Generator Features Auto-Off Function - Located Patch and Termination Point of Wire Kit Includes: Main & Remote Units, (2) 9v Batteries, (2) RJ45 Shielded Patch Cords, RJ11 & Alligator Clip Cord, RJ11 Patch Cord, Durable, Nylon Carrying Case 1573 Tone & Probe Plus Cable Check $77.75 - Fox 2 deluxe Tone Generator - Hound 3 Probe Inductive Tracer - Cordura Carrying Case Fox 2 & Hound 3 Probe Kit Note: The Fox and Hound series is not intended for use on powered wire or cables. All wire or cables must be non-powered, non-grounded and non-connected 3399 ProTone Wire Locator Fox 2 & Hound 3 Probe Kit The Famous probe sold with 1000s of our Real World Certifiers is included in this ProTone Kit Tone Generator and Amplifier Probe Kit - Loud tone with filtering technology locates wires quickly - Ultra bright LED on tip to see dark cables Product Includes: - Volume control and tone LED for controlled operation - Main Unit - Insulated Tip and “60HZ present” warning LED for safety - Remote Probe Unit - RJ11, RJ45 and insulated Alligator clips for connection - Batteries - Powerful extra tests: voltage, polarity and continuity - 2 RJ45 to RJ45 Jumpers - Pouch and 9V batteries included - Product Manual - Protective CTX590 ProTone Wire Locator TRACETone™ Tone Generator & Amplifier Probe TRACETone™ Tone Generator & Amplifier Probe Major Credit Cards Accepted $69.95 Tone Generator and Amplifier Probe Kit Cable tracing kit with advanced new features to give a complete signal tracing solution. - Test continuity and located signal of installed wire and cable. - 2 selectable tone styles - Tone Generator and Amplifier Probe fit together for easy storage. - RJ-11 Alligator clip & cable assembly included. 62-140 $103.55 $43.55 - Tone Generator #62-160. - Amplifier Probe #62-164. - Soft black nylon carrying case. - Cable assemblies and flat tip. 33-864 Tone generator and amplifier probe kit 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $98.75 55 Tone and Probe Kits Greenlee is proud to introduce fully upgraded versions of its industry standard tone and probe tracing kits. These kits offer superior tracing for low voltage applications such as telephone, data, and security alarm wiring. Essential for the internal wiring technician, the tone and probe kits provide the ability to check voltage on wire pairs as well as generate a tagging tone, which is then picked up by the tracing probe. Featuring overall improved internal circuitry in both the amplifier and the tone generator, all of the new tone and probe kits promise to provide an enhanced customer experience for tracing and identifying single conductors or cables within bundles, either at midpoint or at remote ends. The 601K-G Basic Tracing Kit features volume control and external warble-select. The 701K-G Professional Tone & Probe Tracing Kit takes the functionality a step further, featuring an LED headlight, headset jack, Short circuit beeper and external warble-select. Finally, the 701K-G/6A Professional Tone and Probe Tracing Kit has all the features of the 701K-G but incorporates upgraded Telco-Grade angled-bed-of-nails clips for those larger jobs. Best of all, each tone and probe kit in this new series is backed by a one year warranty. 601K-G 601K-G features: Tone Probe: 200B-G with adjustable volume control, and replaceable tip. Tone Generator: 77M-G with continuity & polarity LED, external warble select, short circuit LED/beeper: LED, Single/dual line modular: LED, and alligator/ABN connector clips: Alligator 701K-G features: Tone Probe: 200EP-G with adjustable volume control, replaceable tip, LED signal indicator, test telephone port, headset jack, and LED flashlight. Tone Generator: 77HP-G with continuity & polarity LED, external warble select, RJ11 & RJ45 socket, lanyard, short circuit LED/beeper LED, single/dual line modular LED: Dual, and alligator/ABN connector clips: Alligator 701K-G 701K-G/6A features: Tone Probe 200EP-G with adjustable volume control, replaceable tip, LED signal indicator, test telephone port, headset jack, and LED flashlight. Tone Generator: 77HP-G/6A with continuity & Polarity LED, external warble select, RJ11 & RJ45 socket, lanyard, short circuit LED/beeper LED, single/ dual line modular LED: Dual, and alligator/ABN connector clips: ABN 601K-G 701K-G 701K-G/6A Basic Tone and Probe Kit Professional Tone and Probe Tracing Kit Tone & Probe Tracing Kit w/ABN Test Clips $88.10 $109.85 $109.85 701K-G/6A Pro 3000 Tone and Probe Kit The Pro3000 Tone & Probe Kit is the innovative analog tone and probe from Fluke Networks. It’s your best choice for toning and tracing bare wire on non-active networks. Easily identify individual pairs with its patented SmartTone™ technology (the five different tones for exact pair identification). Angled-bed-of-nails clips allow easy access to individual wires, and the RJ11 connector is ideal for use on telephone jacks. The large powerful speaker on the probe allows you to hear through drywall, wood or other enclosures to find wires quickly and easily. You can send tone up to ten miles on most cables. Attach the nylon pouch to your belt, and you will be equipped for any wire identification job. 26000-900 Pro 3000 Tone and Probe Kit $82.00 IntelliTone™ Pro Toner & Probe The IntelliTone™ Toner and Probe Series from Fluke Networks gives you a digital signal locating technology that’s as advanced as the systems you work with. IntelliTone’s breakthrough solution and the only solution that locates and isolates hidden or bundled voice, data and video cables quickly and reliably, even on active networks. With dramatic gains in speed, precision and productivity that make analog tools obsolete. Intellitone MT-8200 Include: IntelliTone 200 Toner & Probe IntelliTone 100 Tone & Probe IntelliTone 200 Toner IntelliTone 100 Toner IntelliTone 200 Probe IntelliTone 100 Probe Coax F Connector Adapter RJ11 patch cables RJ45 patch cables Test leads with alligator clips Lanyards Owners Cd and quick start guide 9V battery Price 56 Datacomtools.com 60A • 61A 63A 50A • • TM • • • • • • (2) $125.00 53A • • • (2) (2) • • • (2) $199.00 51A • • • • • $125.00 • • • • • • (2) $150.00 • • • • • • • $95.00 • • • • $95.00 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply Tracker II - Traces the path and determines the depth of wires and metallic pipes on active or dead systems without having to deactivate the system. - Lightweight receiver provides audible and visual indications of signal strength. - Transmitter output and receiver sensitivity are fully adjustable for maximum accuracy. - Transmitter offers three methods of connection: direct, inductive coupler, and inductive antenna. - Includes transmitter assembly, receiver assembly, inductive coupler (clamp), built-in inductive antenna, two 8 ft. (2.4 m) test leads with heavy-duty alligator clips and durable polyethylene case. - High frequency transmitter provides range up to 4,000 ft. (1,219 m) and depths up to 7 ft. (2 m). - Receiver is 32 in. long (813 mm). - Battery operated (eight AA and one 9V battery are included). - 1 year limited warranty. 501 Wire Finder/Mini Locator Tracker II $690.00 For technicians who occasionally need to locate buried or in-wall wiring but don’t require all the bells and whistles of a high priced cable locator. Compact design doesn’t take up valuable truck space while easy to understand operations help avoid constantly referring to manuals. The 508S Wire Finder provides reliable results on buried cables to depths of 3 feet and lengths up to 1000 feet. The unit can even be used to determine the approximate depth of a wire or cable before you dig. Fully adjustable transmitter output and receiver gain improve system performance and locating accuracy. - Determines the approximate depth of a wire before digging begins - Transmitter and receiver are fully-adjustable for accurate locating - Reliable results on buried cables to depths of 3’ and lengths up to 1000’ - Quick-change test leads for use in any industry, even international power outlets - Voltage protection allows use on live AC circuits - Automatic shutoff prevents accidental battery discharge 508S Pulser Fault Locator Wire Finder/Mini Locator $280.00 Pulser Fault Locator completes your buried cable trouble-shooting tool set, pinpointing the smallest breaks in buried cable insulation. The transmitter pulses a high-voltage signal that radiates into the earth at fault locations. With the A-frame mounted receiver, a visual analog meter points the way to the source of the voltage & identifies faults on a single wire, showing the need to replace instead of repair. Complete with a rechargeable transmitter, receiver, A-frame, ground stake, 120VAC charger, 12 volt DC cigarette lighter adapter & operating instructions. Extra long test leads feature heavy duty alligator clips for use on multiple cable types. - Portable Transmitter “Pulses” a High Voltage Signal into the Earth at the Location of the Faults. - With the A-frame Mounted Receiver, a Visual Analog Meter Points the Way to the Source of the Voltage. - Multiple Faults on a Single Wire can be Identified Indicating the Need to Replace Instead of Repairing. - Extra Long Test Leads Feature Heavy-Duty Alligator Clips for Use on Multiple Cable Types. - Includes a Rechargeable Transmitter, Receiver, A-Frame, Ground Stake, 120V AC Charger, 12 Volt DC (Cigarette Lighter) Adapter, and Complete Operating Instructions. - Battery-Operated (1) 12V and (1) 9V Included. - 1-Year Warranty PE2003 Modular Adapters Pulser Fault Locator $1110.00 The Banjo Modular Adapters are designed to permit testing on working lines, and allow circuit access without disrupting service. - Sturdy copper contacts are angled to prevent alligator clips from falling off during testing. - Small holes in each contact allow insertion of test probes. - All circuits are clearly marked on sides and bottom of the Banjo adapters. - Banjo Modular Adapters available with 4, 6,and 8 wire (RJ11, RJ45) - Banjo Modular Adapters available with numbered contacts and no interruption of service design - High impact plastic design; outside plant resistant Banjo Modular Adapter allows for replace-able line cords - The Banjo adapter is available in four, six, or eight wire configuration for voice and data applications. - Heavy duty, molded-in clip for attaching to shirt pocket or tool pouch. 10210-100 10220-100 10230-100 10210-101 10220-101 10230-101 Major Credit Cards Accepted 4-Wire Banjo Adapter (in-line) 6 Wire Banjo Adapter (in-line) 8 Wire Banjo Adapter (in-line) 4 Wire Banjo Adapter w/K-plug (in-line) 6 Wire Banjo Adapter w/K-plug (in-line) 8 Wire Banjo Adapter w/K-plug (in-line) 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $22.00 $24.00 $28.00 $26.00 $28.00 $33.00 57 Butt Sets TS52 TS44-PRO TS®52 PRO Caller ID test set features the latest in test set technology. TS42 TS30 TS®40 Series combine ruggedness, and waterproof durability with powerful testing capabilities. TS44-PRO includes Data lockout protection & Data lockout override. The TS®30 – a rugged butt-in telephone test set at an affordable price. TS52PRO Test Set with angled bed-of-nails cord piercing pin TS52PRO Test Set with 346A Plug TS52PRO Test Set with Piercing Pin Clips TS52PRO Test Set w/angled bed-of-nails cord w/piercing pin & RJ11 plug TS44 PRO Test Set with piercing pin only TS44 PRO Test Set with angled bed-of-nails & piercing pin TS44 PRO Test Set with angled bed-of-nails & RJ11 plug TS42DLX Test Set with angled bed-of-nails TS42DLX Test Set with piercing pin clips 52801009 52801004 52801001 52801RJ9 50801001 50801009 50801RJ9 42801-009 42801-001 $404.00 $404.00 $404.00 $414.00 $384.00 $384.00 $384.00 $309.00 $285.00 TS25 TS®25D Test Sets - features data lockout, lockout override and a large LCD. 30800-009 25501-109 22801-009 22801-001 22800-009 19800-009 19800-003 TS22 TS®22 Series Test Sets - combining reliability, durability and expanded utility. TS19 The TS®19 features DataSafe®, Tone or Pulse operation, and Talk capabilities. TS30 Test Set with angled bed-of-nails clips TS25D Test Set with angled bed-of-nails kit TS22A Test Set with angled bed-of-nails clips TS22A Test Set with piercing pin clips TS22 Test Set with angled bed-of-nails clips TS19 Test Set with angled bed-of-nails clips TS19 Test Set with banana jacks clips $228.00 $237.00 $324.00 $324.00 $280.00 $110.00 $110.00 Butt Sets LB110 LB220 LB255 LB300 1780 PE961 PE830 The Lil’ Buttie™ Telephone Test Set is designed for use by datacom, telecom, cable installers and technicians. Advanced features of the Lil’ Buttie PRO include scrolling recall of stored numbers, full display of caller ID and call waiting data and faults, and amplified speaker. The Lil’ Buttie Ranger™ Telephone Test Set is an advanced, DSL-safe telephone test set for use by datacom, telecom, and cable installers and repair technicians. The Resi-Talker is JDSU’s most economical test set for basic telephone system work. Identify POTS dial tone with most economical butt set. Portable handset for installers, repair technicians and other authorized personnel to use for line testing and temporary communications. Features our DigAlert overvoltage alarm & lock-out to eliminate damaging digital service lines. Provides full ADSL compatibility. This Telephone Test Set will help you deal with the increasing complexity of telecom installation and maintenance LB110 LB220 LB220-BT LB230 LB255 LB255-BT LB300 Lil’ Buttie with piercing clip set Lil’ Buttie Pro with bed-of-nails clips Lil’ Buttie Pro with bed-of-nails clips & protective boot Lil’ Buttie Pro with bed-of-nails clips & AT&T clip Ranger with ADLI, bed-of-nails cord set, & pouch Ranger with ADLI, bed-of-nails cord set, & protective boot Resi-Talker with alligator clips cord set $115.00 $152.55 $159.98 $156.00 $229.80 $236.00 $85.05 Modular Adapter This modular adapter allows in-line testing for any plug/jack combination. It includes two 4-pair jacks plus a 152mm (6 in.) modular cord terminated with our patented 4-pair “universal” plug for accessing any standard 6- or 8-position jack. Individual conductors are broken out by pin number and correspond to eight separate test pads. Test equipment can be securely attached to the test pads using alligator clips. For quick reference in the field, USOC, T568A, and T568B wiring charts are printed right onto the MODAPT body. When used with Siemon’s TESTAR® adapter and S110® test adapter, the MODAPT can be used to test connections on S66M and S110 blocks. 58 Paladin Tools Butt Set Test set with two-way hands free & DigAlert™ Tele-Mate Pro telephone test set $110.00 $320.00 $178.00 Tone & Probe Kits MODAPT MODAPT 1780 PE961 PE830 Siemon modular adapter Datacomtools.com TM $20.85 601K 801K For professionals who need wire identification tools without the extra cost, the 601K kit is the answer. 601K 801K When it comes to wire identification kits, the 801K premium tone and probe kit is top of the line! Basic Tone and Probe Kit Premium Tone and Probe Kit 601K Kit Tone Generators and Probes Also Sold Separately 77M Tone Generator 200B Inductive Amplifier 801K Kit Tone Generators and Probes Also Sold Separately 77HP/6A Tone Generator 200FP Multi-Filter Tone Probe $102.10 $169.00 $31.85 $68.60 $38.85 $115.00 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply Fluke 27 II & Fluke 28 II Rugged IP 67 Industrial Multimeters Accuracy Specifications DC voltage Max resolution Accuracy AC voltage Max resolution Accuracy DC current Max resolution Accuracy AC current Max resolution Accuracy Resistance Max resolution Count Capacitance Frequency Temperature Low pass filter (measurement on VSD’s) Compliance IP rating Power Battery life 27II 0.1 mV to 1000V 0.1 % + 1 0.1 mV to 1000V 0.5% + 3 0.1µA to 10A 0.2% + 4 0.1µ to 10A 1.5% + 2 6000 - Yes/Yes 250µS (28 II) Yes Yes Yes CAT IV 600 V/CAT II 1000V Rubber Holster 10 feet drop test Yes, IP 67 rated Limited lifetime 2.5in x 3.93in x 7.8in, 1.54lbs 0.1Ω to 10A 0.7% + 4 0.2% + 4 1.0% + 2 6000/19,999 1 nF to 9999µF 0.5Hz to 199.99 kHz -200°C - 1090°C Yes CAT IV 600 V, CAT III 1000V IP67 Three AA batteries 800 Hours 27 II Rugged IP 67 Average Responding Multimeter 28 II Rugged IP 67 True-rms Multimeter 27 II 28 II 28II 0.05 % + 1 The Fluke 88V Automotive Multimeter is designed to help automotive professional beat the book. This DMM has more measurement functions, troubleshooting features and accuracy to solve virtually any problems on conventional and hybrid vehicles. Features: - 0.1 % dc accuracy - Current measure up to 10 A, 20 A for up to 30 seconds - Millisecond pulse width measurements for fuel injectors - Optional magnetic hanger allows meter to attach to the vehicle and free your hands for other tasks - Min/Max/Average recording with Min/Max Alert to capture variations automatically - Peak Min/Max to record transients as fast as 250 μs - Relative mode to remove test lead resistance from low ohms measurements - Auto and manual ranging for maximum flexibility - Autohold™ to capture stable readings with only one touch of the leads - Analog bargraph to track changing or unstable signals - Input Alert provides audible warning against wrong use of input jacks - 10 meg ohm input impedance won’t damage computer circuits - Limited lifetime warranty 88V 88V Automotive Multimeter 114 Digital Multimeter $441.95 $451.95 The new Fluke 114 is the Troubleshooting tool for “go/nogo” testing. it includes a feature to prevent false readings caused by ghost voltage. 77-IV Digital Multimeter - AutoVolt: Automatic ac/dc voltage selection - LoZ: Helps prevent false readings due to ghost voltage - Large White LED Backlight to work in poorly lite areas - Compact ergonomic design for one-handed operation - Resistance, continuity, frequency, and capacitance - Min/Max/Average to record signal fluctuations. The 77-IV Digital Multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements over Fluke’s original 70 Series with more measurement functions and conformance to the latest safety standard. - Wide 1000V measurement range - Average responding ac measurements - 0.3% accuracy - 10 Amps continuous - Frequency and capacitance - Resistance and continuity Functions V DC V AC A DC A AC Resistance Capacitance Frequency Range best 600.0 mV to 1000V 6.000 V to 1000 V 60.00 mA to 10 A 60.00 mA to 10 A 600.0 Ω to 50 MΩ 1 nF to 9,999 µF 99.99 Hz to 99.99 kHz Functions Volts AC/DC Resistance Accuracy ± (0.3% + 1) ± (2.0% + 2) ± (1.5% +2) ± (2.5% + 2) ± (0.5% + 1) ± (1.2% + 2) ± (0.1% + 1) Best resolution 0.1 mV 1.0 mV 0.01 mA 0.01 mA 0.1 Ω 1 nF 0.01 Hz 77-IV Digital Multimeter 77-IV 114 Includes: - TL75 Test leads - 9V battery (Installed) - 80BK temperature probe - AC72 Alligator clips - Getting started manual Diode test Sleep mode - 30 minutes IEC 61010 rating - CATIII-1000V Battery access door that enables changing batteries without breaking the calibration seal. - Holster - CD with detailed manual 87-5 Industrial Multimeter 87-5 $399.95 Test Leads TL223 TL220 TLK225 TL81A AC285 TL221 TL76 TL71 AC220 AC283 TP220 $59.10 $59.10 $122.95 $122.95 $22.25 $22.85 $25.35 $21.65 $30.25 $30.25 $18.05 Includes: Holster, Installed 9 V battery, TL75 Test leads User manual 115 115 Digital Multimeter Temperature Probe C1600 Gear Box C50 Soft Meter Case C25 Large Soft Case for DMMs TPAK ToolPak, Meter Hanging Kit CXT80 Extreme Case C100 Universal Carrying Case C101 Hard Case C125 Soft Meter Case C550 Tool Bag C35 Soft Carrying Case $140.95 Specifications - Maximum voltage between any terminal and earth ground 600 V - Surge protection 6 kV peak per IEC 61010-1 600 VCAT III, Pollution Degree 2 - Display Digital: 6,000 counts, updates 4 per second - Bar graph 33 segments, updates 32 per second - Operating Temperature -10 °C to + 50 °C - Storage Temperature -40 °C to + 60 °C Cases SureGrip Electrical Test Lead Set SureGrip Industrial Test Lead Set SureGrip Master Accessory Set Deluxe Electronic Test Lead Set SureGrip Alligator Clips SureGrip Test Lead Extension Set 2mm/4mm Test Lead Set Test Lead Set SureGrip Alligator Clips SureGrip Pincer Clips SureGrip Industrial Test Probes 114 Digital Multimeter - AutoVolt: automatic ac/dc voltage selection - Large white LED backlight to work in poorly lit areas - Resistance and continuity - Min/Max/Average to record signal fluctuations - CAT III 600 V safety rated - Safety conformance The Fluke 87-5 has measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in-plant automation, power distribution and electo-mechanical equipment. - Best Accuracy 0.5% + 2 0.9% + 2 Compact true-rms meter for field service technicians. The Fluke 115 is the solution for a wide variety of electrical and electronic testing applications. $269.95 True-RMs Touch hold Fused current inputs Continuity MIN/MAX mode Peak MIN/MAX - 250 µSec Relative mode Range and Resolution 600 V 40MΩ 115 Digital Multimeter 87-5 Industrial Multimeter - $441.95 $48.00 $29.85 $32.00 $30.65 $163.95 $42.90 $47.65 $30.00 $77.50 $17.15 80PK-26 80PK-8 80TK 80AK 80AK-A 80PK-3A 80PK-9 80PK-EXT $167.95 Compatibility Key General Specifications: Bar graph/backlight Peak transient capture Min/Max/Avg Reading hold Relative readings (zero) Safety rating External protection Drop test Dustproof/waterproof Warranty Size & weight (HxWxL) w/holster 88V Automotive Multimeter 110 Series 170 Series 27II, 28II 77IV 87-5 233 289 Tapered Temperature Probe Pipe Clamp Temperature Probe (K) Thermocouple Module (K) Thermocouple Adapter Thermocouple Adapter Surface Probe (K) General Purpose Probe (K) Extension Wire Kit (K) $84.29 $136.99 $116.95 $22.95 $23.75 $129.95 $43.95 $47.15 Fluke Multimeter Accessories Major Credit Cards Accepted 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com 59 233 Remote Display Multimeter The Fluke 116 was specifically designed for the HVAC professional. It has everything needed in an HVAC meter including temperature and microamp measurements to quickly troubleshoot problems with HVAC equipment and flame sensors. - Removable display gives flexibility. - Place the display where you can see it and then put the meter where it is convenient - no more juggling of leads. - True-rms ac voltage and current for accurate measurements on non-linear signals - Measure up to 1000 V ac and dc - Measure up to 10 A (20 A for 30 seconds) - Built in thermometer conveniently allows you to take temperature readings - Built in thermometer for HVAC applications - Microamps to test flame sensors - Min/Max/Average to record signal fluctuations - Large white LED backlight to work in poorly lighted areas - Compact ergonomic design for one-handed operation - Compatible with optional magnetic hanger Features: - Temperature measurements - Large Backlit digital display - 3-1/2 Digits - AutoVolt/LoZ - Min/Max recording - 6000 counts Functions Volts Current Temperature Resistance Capacitance Frequency Diode 116 - Analog bargraph - Display hold - CAT III 600 V safety rated Range and Resolution 600V 600.0µA +400°C 40MΩ 1 nF to 9,999µF 5 Hz to 50 kHz 2V Best Accuracy 0.5% + 2 1.0% + 2 1.0% + 2 0.9% + 2 1.9% + 2 0.1% + 2 0.9% + 2 116 Digital Multimeter $194.95 117 Digital Multimeter Compact True-RMS meter for commercial applications. Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals, and schools. - VoltAlert™ technology for non-contact voltage detection - AutoVolt automatic ac/dc voltage selection - Low input impedance: helps prevent false readings due to ghost voltage - True-rms for accurate measurements on non-linear loads - Measures 20 A (30 seconds momentary; 10 A continuous) - Compact ergonomic design for one-handed operation - Compatible with optional magnetic hanger (ToolPak) for hands free operation - CAT III 600V safety rated Specifications: - Max. voltage between any terminal & earth ground 600V - Surge protection 6 kV peak per IEC 61010-1 600 V CAT III - Fuse for A input 11 A, 1000 V FAST Fuse - Display Digital: 6,000 counts, updates 4 per second - Bar graph 33 segments, updates 32 per second - Battery type 9 volt Alkaline, NEDA 1604A/ IEC 6LR61 117 117 Digital Multimeter Introducing the 179, 177 and 175 Digital Multimeters - the new generation of DMMs. Want a smarter meter or a tougher one? Buy one of these and you get both. With features like lifetime warranty. 6000 count resolution. 0.09% accuracy 177,179. Min/Max/Average. True-rms, ac voltage and current. They’re all CAT IV rated and sport an easy access door. The 177 and 179 have a backlight. The 179 measures temperature. All told, this is one powerhouse line of digital multimeters. They’re all super-simple to use and built tougher than a world champion wrestler. - Backlight to illuminate the screen (177 & 179 only) - Min/Max/Average recording - Drop protected to 1 meter Includes: - 80BK Temperature Probe (179 only) - Test leads 175 177 179 233 - Installed 9V battery - Users manual 175 Multimeter 177 Multimeter 179 Multimeter $259.95 $269.95 $280.95 Current Clamps I2000FLEX I410 I1010 I200 I3000S I400 $321.95 $208.95 $339.95 $132.95 $540.95 $132.95 FOM Fiber Optic Meter $311.95 The new 289 are the next generation high performance logging Multimeter designed to solve complex problems in electronics, plant automation, power distribution, and electromechanical equipment. - TrendCapture Graphing Capability to Review Logged Data - Larger ¼ WGA dot Matrix Display - More Memory - Extended on-board Logging Capability - More Information. Multiple Readings per Display - Low Pass Filter for Motor Drive Measurements - LoZ Function - Helps Eliminate False Readings due to Ghost Voltage - New 50 Ω Range with 1mΩ Resolution for Accurate Motor Winding Measurements - New “i” button - On-board Function help - PC Interface for Closed-case Calibration and Easy Data Transfer Features: - Multiple on screen displays - True-rms ac bandwidth - dBV/dBm - DC mV resolution - Megohm range - Conductance - Continuity beeper - Elapse time clock/time of day clock - Min-Max-Avg/duty cycle/pulse width - Isolated optical DMM interface with USB PC connection - Auto/touch hold - Over 200 hours logging capacity with new sleep function - Warranty Limited 289 Yes 100 kHz Yes 1µV Up to 500 MΩ 50.00 nS Yes Yes Yes Yes Yes Yes Lifetime 289 Industrial Logging Multimeter w/ TrendCapture Probe Lights L210 FOM AC Current Clamp (up to 2000A) AC/DC Current Clamp (up to 400A) AC/DC Current Clamp (up to 1000A) AC Current Clamp AC Current Clamp (up to 3000A) AC Current Clamp Yes Auto/Manual Yes Yes AA Alkaline Yes Rubber Overmold Three Years 2.08” x 2.08” x 7.6” 1.3 lbs 289 Industrial Logging Multimeter w/TrendCapture Fiber Optic Meter I410 0.1mV to 1000V 0.25% + 2 0.1mV to 1000V 1.0% + 3 0.1mA to 10A 1.0% + 3 0.1mA to 10A 1.5% + 3 0.1Ω to 40MΩ 6000 1000 nF to 9999µF 0.1 Hz to 50.00 kHz -40°C to 400°C AA Batteries: (3) Body, (2) Display 400 Hours 2.4 GHz ISM Band, 10 meter range CAT IV 600V, CAT III 1000V 233 Remote Display Multimeter $205.95 170 Series Multimeters Features: - Lifetime Warranty - Display shows improved resolution Accuracy Specifications DC voltage Range Accuracy AC voltage Range Accuracy DC current Range Accuracy AC current Range Accuracy Resistance Range Counts Capacitance Frequency Temperature Power Battery Life Wireless frequency Safety Rating General Specifications AC True-RMS Ranging Backlight Min/Max/ Avg Battery type Removable Display External Protections Warranty Size (H x W x L) Weight $460.95 L210 L206 LVD1 L215 Compatibility Key 116 Digital Multimeter $576.95 110 Series 170 Series 27II, 28II 77IV 87-5 233 289 Probe Light Kit Deluxe LED Hat Light Volt Light SureGrip Kit w/ Light & Probe Extender $28.95 $34.90 $26.50 $72.55 For more information on Fluke Multimeter Accessories go to www.datacomtools.com Fluke Multimeter Accessories 60 Datacomtools.com TM Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply 289/FVF Data Login Multimeter and Software Combo Pack Digital Logging Meters Includes: - Fluke-289 True-rms industrial logging multimeter. - FVF-SC2 FlukeView forms software and cable. - TL71 Silicon test lead set. - AC72 Alligator clips. - 80BK-A Integrated DMM temperature probe. - TPAK Magnetic meter hanger for hands-free operation. - C280 Soft case for meter protection and accessory storage. 289/FVF Data Login Multimeter and Software Combo Pack $649.95 179/EDA2 Electronics Multimeter and Deluxe Accessory Combo Kit Includes: - 179 True-rms digital multimeter. - C35 lightweight soft case. - TL910 Electronic test probes. - TL224 SureGrip silicon test leads. - AC280 SureGrip hook clips. - 80BK-A Type-K temperature probe. - ToolPak meter handing accessory to hold meter on steel surfaces. 179/EDA2 Electronics Multimeter and Deluxe Accessory Combo Kit DML-430A Digital Logging Meter (43,000 Data Points) $316.95 117/322 Electrician’s Combo Kit Includes: - 117 True-rms digital multimeter. - C115 Deluxe carrying case. - 322 Compact clamp meter. - TL75 Test lead set. - ToolPak Meter hanging strap. - Three-year warranty on 117 DMM. - Two-year warranty on 322 Clamp. - One-year warranty on accessories. 117/322 Electrician’s Combo Kit $294.95 116/322 HVAC Combo Kit HVAC Combo Kit Includes: - Fluke 88V automotive multimeter. - Insulation piercing probe. - TL224 Heat resistant test leads. - Packaged in a carrying case. - TP220 Removable test probes. - AC285 Alligator clips. - TPAK Magnetic hanger. - 80BK-A Temperature probe. - RPM80 Inductive pick-up. - Automotive backprobe pins. Automobile Combo Kit $607.95 87V/E2 Industrial Electrician’s Combo Kit Industrial Electrician’s Combo Kit Major Credit Cards Accepted $289.00 Digital Multimeters DM-810-A includes: - Auto and manual ranging - Beep-Jack™ audible and visible warning to guard against improper A and mA terminal plug in. - High visibility 10000 count LCD dual digital display. - Capacitance measurement capability. - Intelligent auto-power off, display backlight, analog bar graph. - True RMS - PC interface capability using optional USB RS-232 cable with data recording PC software. - Lifetime Limited Warranty. DM-820-A also includes: - Non-contact and single probe voltage detection. Includes: - 87V Industrial multimeter. - C35 lightweight soft case. - TL224 1.5m silicone leads. - TP38 removable probes. - AC220 retractable alligator clips. - ToolPak meter hanging accessory. - 80BK-A K-type temperature probe. 87V/E2 - Performs resistance, conductance, frequency, duty cycle, temperature and capacitance measurements, plus diode and continuity tests. - Dual temperature measurement up to 1832°F/1000°C using type K thermocouples. - Bright, backlit display is easy to read under any light condition. - Intelligent Power Off conserves battery life but will not turn off during measurements. - Wide AC bandwidth – to 100 kHz for voltage and 20 kHz for current. - Accessories included: (1) 9V battery, bead temperature probe (400°F/ 204°C max.), test leads, protective boot, carrying case. - Lifetime Limited Warranty. DM-860A Industrial 500,000-Count Digital Multimeter $294.95 88V/A Automobile Combo Kit 88V/A - AC+DC True RMS, 50,000-count dual display for greater accuracy. 500,000 count available in DC voltage mode. - VFD (variable frequency drive) voltage and frequency functions for accurate readings on noisy drive waveforms. - Beep-Jack™ audible and visual input alert helps avoid blown fuses or damage to meter. - 41-segment analog bar graph makes it easy to view changes. - Record max, min, avg, and max-min and data hold. - Crest capture (peak hold) max and min readings. - Relative offset display mode makes monitoring relative measurement changes simple. Specifications Voltage measurement 500.00mV; 5.0000, 50.000, 500.00, 1000.0V Amperage measurement 500.00, 5000.0μA; 50.000, 500.00mA; 5.0000, 10.000A Resistance 500.00Ω; 5.0000, 50.000, 500.00kΩ; 5.0000, 50.000MΩ Capacitance 50.00; 500.0nF; 5.000, 50.00, 500.0μF; 5.000, 25.00 mF Frequency 5Hz-200kHz sine wave; 5Hz-2MHz logic level square wave Temperature K type, -58°F to 1832°F (-50°C to 1000°C) Measurement category Category CAT IV, 1000V Includes: - Fluke 116 HVAC multimeter. - Fluke 322 clamp meter. - TL75 Hard point test lead set. - Tool pak meter hanger. - C115 Deluxe carrying case. - 80PK-11 Velcro pipe clamp. - 80AK-A Thermocouple adapter. - 80PK-1 Thermocouple bead probe. 116/322 $255.00 Industrial 500,000-Count Digital Multimeter Includes: - 179 True-rms digital multimeter. - 1AC-II VoltAlert voltage detector. - C35 lightweight soft case. - AC220 retractable alligator clips. - TP220 12mm stainless steel tip. - TL224 1.5m silicone leads. - ToolPak meter hanging accessory. - 80BK-A K-type temperature probe. Electrician’s Multimeter and Voltage Tester Combo Kit - Voltage Measurement: 60mV to 1000V AC/DC - Amperage Measurement: 600mA to 10A AC/DC - Resistance: 600Ω to 60MΩ - Frequency (Hz): 40 ~ 500 - Measurement Category: Cat IV 1000V $316.95 179/AC-II Electrician’s Multimeter and Voltage Tester Combo Kit 179/AC-II - Auto and manual ranging - Beep-Jack™ audible and visible warning to guard against improper A and mA terminal plug in. - Capacitance & dual-input temperature measurement capability. - Autocheck feature provides selection of AC volts, DC volts or resistance with low impedance for ghost voltage elimination. - High visibility 10000 count LCD dual digital display. - True RMS (AC + DC) - Data Logging Capability: 87,000 points stored single channel, 43,000 points stored dual channel. - Intelligent auto-power off, display backlight, analog bar graph. - Lifetime Limited Warranty. - Voltage Measurement: 60mV to 1000V AC/DC - Amperage Measurement: 600mA to 10A AC/DC - Resistance: 600Ω to 60MΩ - Frequency (Hz): 40 ~ 500 - Measurement Category: Cat IV 1000V $451.95 DM-820A Digital Multimeter DM-810A Digital Multimeter 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $190.00 $175.00 61 Professional Plant Digital Multimeters Mini Digital Multimeter + Voltage Detector DM-510 Features: - Auto and manual ranging - Non-contact and single-probe voltage detection - Beep-Jack™ audible and visible warning to guard against improper A and mA terminal plug in. - High visibility 6000 count LCD display. - Capacitance and temperature measurement capability. - Low impedance mode. - True RMS - Peak (crest) hold; min, max - Auto power off, display backlight, analog bar graph - PC interface capability using optional USB RS-232 with data recording PC software. - AutoCHECK provides selection of AC volts, DC volts, or resistance with low impedance for ghost-voltage elimination. - Lifetime Limited Warranty. - Voltage Measurement: 60mV to 1000V AC/DC - Amperage Measurement: 600mA to 8A AC/DC - Resistance: 600Ω to 60MΩ - Frequency (Hz): 50 ~ 400 - Measurement Category: Cat IV 300V; Cat III 600V, Cat II 1000V DM-510A Professional Plant Digital Multimeter $130.00 - AC/DC Voltage & current, resistance, diode/continuity. - Built-in non-contact AC voltage detector (NCV) with red LED indicator and audible beeper. - Large-digit 2,000 count LCD display. - 10A max Current. EX310 - Manual ranging w/ 9 functions and 0.5% basic accuracy. - Battery test function for 1.5V and 9V batteries. - Low battery indicator. - Complete with test leads, tilt stand, protective holster and 9V battery. EX320 - Autoranging DMM with 8 functions and 0.5% basic accuracy. - Large-digit 2,000 count LCD display. - 10A max Current. - Max Hold, Data Hold, Relative and Auto power off. - Complete with test leads, tilt stand, protective holster and 2 AAA batteries. EX310 EX320 Mini Digital Multimeter + Voltage Detector Mini Digital Multimeter + Voltage Detector $39.99 $49.99 Heavy Duty True RMS Industrial MultiMeter Digital Multimeters - 1000V input protection on all functions. - Dual sensitivity frequency functions. - Large backlit LCD. - Diode open circuit voltage of 2.8V DC. - Auto power off with disable feature. - Complete with double molded test leads, magnetic hanging strap, Type K bead wire temperature probe (EX505, EX520 & EX530), carrying case, & 9V battery. DM-200 Features: - Auto and manual ranging - Non-contact and single-probe voltage detection - Beep-Jack™ audible and visible warning to guard against improper A and mA terminal plug in. - High visibility 6000 count LCD display. - Auto power off, display backlight, analog bar graph - PC interface capability using optional USB RS-232 cable with data recording PC software. - Lifetime Limited Warranty. - Voltage Measurement: 60mV to 1000V AC/DC - Amperage Measurement: 600mA to 8A AC/DC - Resistance: 600Ω to 60MΩ - Frequency (Hz): 50 ~ 400 - Measurement Category: Cat IV, 300V; Cat III 600V, Cat II 1000V DM-210A DM-200A DMM, 1KV AC/DC, CAP, TEMP (DM-210A) DMM, 1000V AC/DC (DM-200A) $107.60 $72.65 TRMS Digital Multimeter - True RMS for no-compromise accuracy when harmonics are present. - Large LCD for easy viewing. - AC/DC voltage detection for identifying live lines without contacting conductors. - Easy viewing, backlit display. - Auto shut-off for longer battery life. - Low battery indicator. - Audible continuity and diode tests. - Frequency, capacitance, & resistance measurements. - Data hold to capture measurement. - 6000-count LCS for high resolution. - Min/Max feature for added versatility. - Audible input alert warns user if leads are in incorrect position. - Lifetime limited warranty. Specifications Amperage measurement Voltage measurement Resistance measurement Frequency measurement Capacitance Display Measurement category DM-350 TRMS Digital Multimeter $133.35 Durable nylon carrying case - Inside pocket for test leads. - Elastic straps inside to hold multiple instruments. - With carry strap. 62 Models: EX510, EX520 (True RMS) - 6000 count—high resolution. - 0.09% accuracy. - Min/Max/Relative/Data Hold. - 20A max current. Model EX530 (True RMS) - 40,000 count—highest resolution. - 0.06% accuracy. - Min/Max/Relative/Data Hold. - 20A max current. - Peak Hold (AC only). Model EX570 (True RMS) - Type K thermocouple contact temperature - InfraRed Thermometer w/laser point. measurements. - 0.06% accuracy. - Hold, relative and peak hold. - 40,000 count - highest resolution. - Min, Max and Average recording. - Memory for storage and recall of three measurements. EX503 EX505 EX510 EX520 EX530 EX570 Industrial Multimeter (4000 count) True RMS Industrial MultiMeter (4000 count) Industrial MultiMeter (6000 count) True RMS Industrial MultiMeter (6000 count) True RMS Industrial Multimeter (40,000 count) True RMS Industrial MultiMeter w/IR Thermometer Carrying Case Datacomtools.com $23.20 TM Sure-Grip Test Leads - 39in. silicon insulated wire. - Tips for low contact resistance. - Measurement Category IV, 1000V per UL31010. - Maximum current 10 amps. - Lifetime limited warranty. TSG-3 Sure-Grip Test Leads $27.45 $94.99 $114.99 $149.00 $179.99 $219.99 $249.99 Professional MultiMeter - Large backlit LCD display with easy-to-read 1” digits. - Type K thermometer built-in for temp. measurements. - Low current capability: measure down to 0.1μA. - Input fuse protection and mis-connection warnings. - Complete with CAT III test leads, multi-position tilt stand and velcro strap for hanging, protective holster with test lead holder, bead wire temperature probe, and 9V battery. 600.0, 2000µA; 6.000, 10.00A 600.0mV; 6.000, 60.00, 600.0, 1000V 600.0Ω; 6.000, 60.00, 600.0kΩ; 6.000, 60.00MΩ 40 Hz minimum , 100Hz to 60 kHz Maximum, depending on function and range 600.0nF; 6.000, 60.00, 600.0, 2000µF 6000-count LCD CAT IV, 600V; CAT III, 1000V Greenlee Multimeter Accessories TC-20 Models: EX503, EX505 (True RMS) - 4,000 count. - 0.5% accuracy. - Data Hold and Relative. - 10A max current. Model EX410/EX411 - True RMS (EX411) - Manual Ranging Model EX430 - True RMS (EX430) - Autoranging - Capacitance - Frequency Model EX450 - Built-in IR thermometer - Autoranging Model EX470 - Built-in IR thermometer - True RMS - Autoranging - Capacitance - Frequency - Relative function EX410 EX411 EX430 EX450 EX470 Manual Ranging MultiMeter True RMS Manual Ranging MultiMeter Autoranging MultiMeter Autoranging MultiMeter + IR Thermometer True-RMS Autoranging Multimeter + IR Thermometer $49.99 $74.99 $94.99 $119.99 $149.99 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply Probe Light Kit Stud Finder with AC Detection - Reliable way to find AC voltage, wood & metal studs. - Finds the edges of wood/metal studs up to 3/4” deep through drywall. - Non contact detection of AC voltage. - Dual scanning for more flexibility. - Deepscan mode finds the edges of wood or metal studs up to 1 1/2” deep for thick construction such as plywood, paneling or tile over drywall. - Senses the changes in subsurface densities to pinpoint studs & joists, while detecting AC voltage. - One year limited warranty. L211 Probe Light Kit: - Includes L200 Probe Light, TL71 Premium DMM Test Lead Set & C75 case. - Small, rugged light easily attaches to any Fluke test probe. - Flexible silicone test leads are heat and cold resistant. - Zippered case has two inside pockets. - Probe light frees both hands for work. - 120 hours of battery life. - Uses 2 3-volt watch batteries. L211 Probe Light Kit $48.95 SureGrip™ Master Accessory Set SF-420AC Kit includes all the SureGrip™ leads and probes in a handy roll-up pouch: - AC220 SureGrip™ alligator clip set. - AC280 SureGrip™ hook clip set. - AC283 SureGrip™ pincer clip set. - AC285 SureGrip™ large jaw alligator clip set. - TP220 SureGrip™ test probe set. - TL224 SureGrip™ silicone test lead set. - 6-Pocket storage pouch. TLK225 SureGrip™ Master Accessory Set Stud Finder with AC Detection Metal Locator - Save time by eliminating rework, needless holes and broken bits and sawblades. - Finds both ferrous and non-ferrous metal and indicated depth up to 6” deep. - Easy-to-read LCD identifies target location and depth. - Indicates depth to nearest 1/2”. - Automatically indicated if target is steel rebar or copper pipe (or any magnetic vs. non-magnetic material.) - Easy-to-use, simple two button operation. - One year limited warranty. $122.95 SureGrip™ Kit with Probe Light and Probe Extender Kit Includes: - L200 Probe light. - TP280 20 cm Test probe extenders. - TP220 SureGrip test probes. - TL224 SureGrip silicon test lead set. - Foldable soft pouch with six pockets and hook-and-loop. L215 SureGrip™ Kit with Probe Light and Probe Extender SF-780 $72.55 - 1m long test lead with a safety shrouded, right angle banana connector on one end and a stainless steel test probe on the other end, rated up to 10A. - Insulated alligator clip rated up to 5A probe tip extender rated up to 3A. - Modular test probe with banana connector in the handle, rated up to 10A. - Modular hook & pinch style clip test lead w/banana connector rated up to 5A. - Modular pinch-style clip test lead with banana connector, rated up to 5A. - Modular alligator clip with banana connector, rated up to 5A. - Bare spade lug with banana connector, rated up to 10A. - CAT III 300V. - Compatible w/multimeters that accept safety shrouded, banana connectors. - One year warranty. Deluxe Electronic Test Lead Kit With the Fluke 561 infrared thermometer, you can also take contact and ambient temperatures in the way that’s best for you. Use the IR thermometer to measure hot, moving, electrically energized, and hard-to-reach objects instantly. Infrared and Contact Thermometer 561 5904A/POM Deluxe Electrical DMM Test Lead Kit Infrared Thermometer 62 Infrared Thermometer 63 Deluxe Multi-Use DMM Maxi-Kit Major Credit Cards Accepted $314.95 411D & 416D Distance Meters Fluke Distance Meters are professional-grade laser distance meters - they’re fast, easy to use, & they fit on your tool belt. $90.00 - Reduce estimation errors, saving time and money. - Instant measurements of the distance between two objects with one-button operation. - Quick calculations of distance such as area and volume. - Easy distance addition & subtraction calculations. Deluxe Multi-Use DMM Maxi-Kit: - Silicon insulated 4ft (1.2m) leads with right angle plug. - Modular probe set with replaceable tips. - 5 sets of replacement tips. - Retractable tip test probe set. - Test lead coupler set. - Medium alligator clip set. - Large alligator clip set. - Spade lugs. - IC probe tip adapter. - Minigrabber & Minipincer test clip leads. 5677B $99.50 63 Infrared Thermometer - High-resolution optics. - High accuracy: 1 % and repeatability: 0.5 %. - MAX temperature display. - Laser targeting. - Backlit display. - Expanded measurement range up to 535°C (999°F). $81.50 Deluxe Electrical DMM Test Lead Kit: - Silicone insulated 4ft (1.2m) test leads. - Modular electrical test probes with stainless-steel tips. - Maxigrabber test clips with jaws. - Maxigrabber test clips with hooks. - Maxigrabber test clips with pincers. - Large alligator clips. - Nylon storage pouch. $178.95 62 Infrared Thermometer - Single point offset laser sighting. - Best accuracy in its class: + 1% of reading. - Holds temperature readings for 7 seconds. - Dual displays shows current and MAX measurements. - Backlit display for poorly lit areas. - Comfortable ergonomic handle with protective rubber boot for added durability. - Fitted carrying case. - Wide temperature range from -30º to 500ºC. $122.95 Deluxe Electronic Bench DMM Test Lead Kit with Straight DMM Plugs: - Silicone insulated 4ft (1.2m) leads fit meters from Fluke, HP, and others. - Modular electronic test probes attach to leads. - Extended fine-point adapters attach to probe tips. - IC adapters attach to probes for secure probing on chip leads. - Minipincer test clip leads for fine pitch chip leads. - Minigrabber test clip leads extend the reach of the test leads. Deluxe Electronic Bench DMM Test Lead Kit with Straight DMM Plugs $189.00 561 IR and contact thermometer Combines the temperature measurement functions that industrial, electrical, and HVAC/R professionals need, all in one tool. It measures both infrared and contact temperature, replacing several other test tools. Test Lead Kits 6204A Metal Locator IR Thermometers Deluxe Electronic Test Lead Kit TL81A $36.25 Laser Distance meters are better than ultrasonic devices because they use laser light waves & measure their reflection to accurately determine distances. $105.00 411D 416D Laser Distance Meter 30m/100ft max Laser Distance Meter 60m/200ft max 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $115.00 $235.00 63 MicroScanner2 Cable Verifier MS2-100 The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once – graphical wiremap, pair lengths, distance to fault, cable ID, and far end device. What’s more, its integrated RJ11, RJ45, and coax test ports support virtually any type of low-voltage cable testing with no need for awkward adapters. The end result is reduced test time and technician error. That makes high-quality installations more efficient than ever. Today’s communications technicians have a lot more problems to deal with than just the cabling. They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem. MicroScanner2 acknowledges this, giving technicians high power vision to verify today’s most common voice, data, and video services. That means faster, more comprehensive troubleshooting MS2-100 Includes: - MicroScanner2 Cable Verifier - Main wiremap adapter - Multi-language Getting Started Guide MS2-100 MS2-KIT Microscanner2 Cable Verifier MS2-KIT includes: - MicroScanner2 Cable Verifier - Main wiremap adapter - Remote identifiers #2-7 - IntelliTone Pro 200 probe - Shielded twisted-pair RJ45 patch cord - RJ11 patch cord - Clip-set RJ45 to 8 alligator clip bare wire adapter - F Coax push on patch cord MS2-KIT MS2-TTK $449.00 - Accessory soft pouch - (2) AA alkaline batteries - (1) 9V alkaline battery - MicroScanner2 Getting Started Guide - MicroScanner2 Owners CD - IntelliTone Pro Getting Started Guide - IntelliTone Pro owners CD - Packaged in a deluxe Fluke Networks carry case Microscanner2 Cable Verifier Kit MS2-TTK Includes: - MicroScanner2 Cable Verifier - IS60 Pro-Tool Kit - IntelliTone™ 200 Tone Probe - RJ11 and RJ 45 patch cables MS2-TTK - User CD - Batteries - Fluke Networks carry pouch $795.00 - Lanyard - Owners CD and quick start guide - 9 volt battery - Packaged in a deluxe Fluke Networks carry case. MicroScanner2 Termination Kit $795.00 Perform physical cabling tests & wiring verification including length measurement. - Tests for shorts, opens, miswires, reversals, and split pairs - Measure cable length and send tone as tone generator - Displays PASS icon for correctly wired T568A/B and 6-pin telephone cable - Two-line, 16-character full alphanumeric LCD with icons for clear results - Integrated jacks for Telco and Network connections, F-connector for coax - Separate Telco, Coax, and Network mode buttons for easy test selection - Cable test results displayed in wire map format along with diagnostic messages - Auto-off and timed backlight in any mode for low power consumption and long battery life Testifier Pro Cable Tester TP650 TestifierPro Cable Tester, #1 Remote, Pouch TP655 TestifierPro Cable Tester, #1 to 8 Remotes, Zippered Pouch TP650 TP655 Jonard Holster Kits TK-50 64 TK-22148 TK-375 Datacomtools.com TM TestifierPro Cable Tester TestifierPro Cable Tester Kit $215.00 $279.00 TK-50 includes: - Can wrench - Cable splicing Knife - Electrician’s scissors - Probe pick - Belt Pouch TK-22148 includes: - Electrician’s Scissors - Combo crimper long nose plier - Belt Pouch TK-375 includes: - Fiber optic stripper - Electrician’s scissors - Belt Pouch TK-50 TK-22148 TK-375 Five piece telecom installers kit Telephone splicing kit Fiber optic kit $38.00 $32.25 $38.00 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply CI-Kits CI-KIT2 CI-KIT The CI kit provides all the tools that a telecommunications technician needs for day-to-day activities. Included in the kit is an S814 impact tool with 66 and 110 termination blades, a probe pic, electricians scissors, mini flathead screwdriver, and a cpt –web cable preparation tool. These tools are stored in a handy , lightweight clip-on pouch which allows the installer to cut, strip, and terminate cabling without having to carry separate tools or larger tool kits. Siemon’s CI KIT2 builds upon the many benefits of the standard CI KIT but is larger to fit the popular AllPrep Cable preparation tool in place of the cpt-web tool, and a “D-ring” has been added to carry additional tools. These tools are stored in a lightweight clip-on pouch which allows the installer to cut, strip and terminate cabling without having to carry separate tools or larger tool kits. CI-KIT CI-KIT2 Siemon Tool Kit Siemon Tool Kit $158.00 $193.75 PRO Network/Telco Installer Kit Kit Includes - 30-696 Ratchet Telemaster™ - 35-485 Punchmaster™ II Punch Down Tool with 110 Blade - 35-473 Probe Pick & Spudger - 45-165 Coaxial Stripper, 3/16 Inch to 5/16 Inch - 35-088 Electrician’s Scissors w/Stripping Notch - 35-497 Replacement Blade, Punchmaster™ II Turn-Lock™ Style 66 Blade - 85-396 8-Position 8-Contact Round Solid, (RJ-45) (Package of 50) - 35-535 Mechanic’s Tool Bag 33-506 PRO Network/Telco Installer Kit $180.00 Master Series Network Service Kit Kit Includes - 30-696 Ratchet Telemaster™ - 35-485 Punchmaster™ II Punch Down Tool with 110 Blade - 35-473 Probe Pick & Spudger - 45-165 Coaxial Stripper, 3/16 Inch to 5/16 Inch - 35-093 Cable Splicing Kit - 35-497 Replacement Blade, Punchmaster™ II Turn-Lock™ Style 66 Blade - 62-200 LinkMaster™ Tester - 35-908 7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver - 33-864 Tone Generator and Amplifier Probe Kit - 62-096 Smart6™ Modular Tester - 45-719 Kinetic T-Stripper/Tel Crimp Tool - 85-396 8-Position 8-Contact Round Solid, (RJ-45) (Package of 50) - 35-410 Large Mouth Bag - 13 in. long 33-706 Master Series Network Service Kit DataReady® PRO Kit $375.00 A complete data cable installation kit providing everything to support the installer using commonly-available connectors, and punchdown termination blocks. All tools contained in a professional-quality, soft-sided zipper case with heavy-duty wrist strap. Kit Contains: - Data SureStrip™ Cat5e, Cat6, Phone Cutter/Stripper - Untwist Tool - Ergonomic CrimpALL/8000 Crimper Frame Only - RJ45 WE/SS Die (8P8C) - RJ11/12 WE/SS Die (6P6C, 6P4C, 6P2C) - RJ22 Handset WE/SS Die (4P4C) 901378 Major Credit Cards Accepted - RJ45 AMP Die (8P8C) - RJ11 AMP DEC-MMJ Offset Die (6P6C) - SurePunch® Pro PDT Handle & Light - 110/66 Blade - SurePunch® & SurePunch® Pro PDTs - Double 110 Blade-SurePunch® & SurePunch® Pro - LAN ProNavigator™ Tester 1543 DataReady® PRO Kit 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $329.00 65 Telecom Tool Kits Fluke Networks’ Electrical Contractor Telecom Kits are comprised of industry standard telecommunications tools and test equipment. Contents include: D®814 Impact Tool, Cable Stripper, Probe Pic, Electrican’s D-Snips™, Standard 4-wire Modular Adapter and EverSharp® 66/110 cut blade. Soft carrying case included for easy organization. - Choose either kit I with TS®30 Test Set or kit II with Pro3000™ Analog Tone & Probe - D814™ industry standard punchdown tool for reliable terminations - EverSharp™ 66/110 Cut Blade provides flexibility for different block and jack terminations - Cable Stripper quickly rings and slits many types of cable - Use the Probe Pic to check for loose or damaged connections - Cut and strip wire cleaner and faster with the Electricians’ D-Snips™ - Connect to jacks for testing with the Standard 4-Wire Modular Adapter - A soft zippered pouch keeps your tools all in one convenient place 11290-000 11289-000 Electrical Contractor Telecom Kit I (with TS®30 Test Set) Electrical Contractor Telecom Kit II (with Pro3000™ Analog T&P Kit) 11290-000 11289-000 $324.00 $227.00 Ultimate Tool Kits Part # 900265 1116 1257 1555 6500 1780 1556 8000 2061 2062 2063 2064 2067 2687 3589 4571 4572 4573 4574 4575 4591 4599 1543 1573 1594 1821 1119 1907 1908 1280 2281 2282 2283 9645 9714 9715 1900 9546 1902 9520 1903 1923 1927 9546 901074 4941 4923 4932 4933 4934 4938 4939 66 Description KT 8 Professional Cutter Data SureStrip LC CST CATV SealTite® Pro Crimper PowerPlay PT-510 Butt Set All-in-One Data & Phone Tool (WE/SS-style) Ergonomic CrimpALL8000 Crimper Frame Only RJ45 WE/SS Die for CrimpALL® 800/1300 Series RJ11/12 WE/SS Die, CrimpALL® 8000/1300 Series RJ22 Handset Die for CrimpALL® 8000/1300 Series RJ45 AMP Die for CrimpALL® 8000/1300 Series RJ11 DEC-MMJ Die, CrimpALL® 8000/1300 Series Dies for Crimp ALL 8000 & 1300 Series RJ45 & CATV SurePunch® Pro PDT Handle Only 110/66 Blade - SurePunch® & Pro PDTs 110 Blade for SurePunch® & Pro PDTs 66 Blade - SurePunch® & Pro PDTs BIX™ Blade for SurePunch® & Pro PDTs Krone LSA Blade for SurePunch® & Pro PDTs Double 110 Blade-SurePunch® & Pro SurePunch® Pro PDT Detachable Light LAN Pro Navigator™ Tester Tone & Probe Plus Cable Check™ LAN & A/V Cable-Check™ - 1594 AM 35 Round Cable Slitter (1 - 1.4”) SmartHome Data SureStrip® BNC Extraction Tool CATV CST Pro Coax Stripper 3-Level (Green Cassette) CST Pro Replacement Blade Orange CST Pro Replacement Blade Black CST Pro Replacement Blade Blue RG59 Compression Cable TV F Connectors - 50 pack RG6/6Q Compression RCA Connectors - 10 pack RG6/6Q Compression BNC Connectors - 10 pack Can Wrench RJ45 WE/SS 8P8C Modular Plugs (Cat5 & E) - 10 pack RJ45 Modular adapter (8-Way) RJ11 WE/SS 6P6C Modular Plugs - 10 Pack RJ11 Adapter Untwist Tool Flaring Tool for CATV “F”: RG6,RG6Q & RG59 Twisted Pair Modular Connectors CATV “F” (female) to BNC (male) Adapter GripPack Quick Release PDT Holder Ultimate Tool Bag Ultimate Technician Tool Kit Ultimate Premise Service Kit Ultimate DataReady Pro Kit Ultimate Telco Technician Tool Kit Ultimate Coax Compression Tool Kit Datacomtools.com TM 4932 • • • • • 4933 • • • • • • • • • • • • • • • • • • 4934 • • • • • • • • • • 4939 • 4932 • 4933 • • • • • • • • 4938 • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4934 4938 • • 4939 $499.00 $385.00 $329.00 $485.00 $445.00 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply Premise Service Kit Paladin’s data, voice, & coaxial LAN installation kit provides everything for twisted pair & coaxial cable installation. All tools contained in a professional blow-mold case. - 900265 KT 8 Cutter - 1116 Data SureStrip™ - 1257 LC CST CATV - 2062 CrimpALL® 8000/1300 Series - 3590 SurePunch® Pro PDT Handle & Light - 4572 110 Blade for SurePunch® & SurePunch® Pro PDTs - 4573 66 Blade - SurePunch® & Pro PDTs 901039 - 1543 LAN ProNavigator™ Tester - 1573 LAN Cable-Check™ & Telephone Test Set - 1902 RJ45 Modular adapter (8-Way) - 901074 CATV “F” (F) to BNC (M) Adapter Ergonomic CrimpALL/8000 Crimper Frame Only - Die for CrimpALL 8000 & 1300 Series RJ45 & - CATV RJ11/12 WE/SS Die Premise Service Kit $387.35 DataReady Kit The complete Category 5 datacom tool set in a handy zipper case! Everything needed for a CAT-5 installation except the cable. Kit Includes: - 1116 Data SureStrip - 1556 All-in-One Data & Phone Tool - 3570 SurePunch Handle - 4571 110/66 Blade - 1576 Data/Link ID & Cable-Check - 9546 RJ45 WE/SS Modular Plugs - One-year Warranty on Kit 901053 DataReady Kit CrimpALL® Packs $169.00 Contains the ergonomically designed CrimpALL® tool frame & the four most popular datacom die sets in a rugged nylon pack with belt loop and wrist strap. 4803 Includes: - RJ11/12 WE/SS Die, CrimpALL® 8000/1300 Series - RJ22 Handset Die for CrimpALL® 8000/1300 Series - Die for CrimpALL/8000 & 1300 Series RJ45 & CATV - Die for CrimpALL/8000 & 1300 Series - Insulated Terminal & Lug 4803 4801 1300 Packs 4801 Includes: - RJ45 WE/SS Die for CrimpALL 8000/1300 Series. - RJ11/12 WE/SS Die, CrimpALL 8000/1300 Series. - RJ22 Handset Die for CrimpALL 8000/1300 Series. - RJ11 DEC-MMJ Die, CrimpALL 8000/1300 Series. CrimpALL® DIY Home Pack CrimpALL® Data Pack $138.00 $121.45 Contains the four most popular datacom die sets and Paladin’s new Lil Splitter! 1300 Series crimp tool frame and four die sets in rugged black nylon pack with belt loop and wrist strap. 4301 Includes: - Ergonomic CrimpALL/8000 Crimper Frame Only - RJ11/12 WE/SS Die (6P6C, 6P4C, 6P2C) - 2062 - RJ22 Handset WE/SS Die (4P4C) - 2063 - RJ45 WE/SS & CATV F Die - 2687 - Die for CrimpALL/8000 & 1300 Series - Insulated Terminal & Lug - 2035 4301 4303 Major Credit Cards Accepted 4303 Includes: - 1300 Series Crimp Frame Only - 1302 - RJ11/12 WE/SS Die (6P6C, 6P4C, 6P2C) - 2062 - RJ22 Handset WE/SS Die (4P4C) - 2063 - RJ45 WE/SS & CATV F Die - 2687 - Die for CrimpALL/8000 & 1300 Series - Insulated Terminal & Lug - 2035 1300 Data Pack 1300 DIY Home Pack 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $117.89 $110.00 67 Network Tool Kits This convenient kit is perfect for small offices or students just starting out. It includes the essential tools needed to easily install networks or to make quick repairs. 4929 Includes: - SureStrip UTP/STP & flat stain cutter/stripper - All-in-one Phone/Data Crimper - Non-Impact 110 Punchdown Tool - (20) RJ45 plugs, Cat5e, solid/stranded; flat/round cable - Zipper case with carrying strap 4909 Includes: - Data SureStrip - Economy All-in-One Phone & Data Tool (WE/SS) - 110 Non-Impact Punchdown Tool - RJ45 WE/SS 8P8C Mod. Plugs (Cat5e, Cat5) x 10 Basic LAN Tool Kit Network Tool Bundle 4929 4909 $82.65 $56.75 Computer Service Kit For repair and maintenance of desktop computers & electronic equipment. Kit includes: - 3.6V cordless screwdriver, battery & charger - ESD wrist strap - 30-watt soldering iron - Desolderer & soldering aid with pick & scraper/cutter tip - 2 needle nose pliers - Angled-head lead cutter - Insulated tweezers - Component gripper & IC extractor - 10-piece driver socket set - 24-piece driver bit set: Torx, Hex, Phillips, Pozidrive, Slotted & Square-Head - Socket adapter/extender & socket bit holder/extender Computer Service Kit 4370 $109.20 Starter Kits Part # 1556 1116 3570 4572 6500 9546 3580 Description DataSure® UTP/STP cutter/stripper Datacomm scissors All-in-One phone/data crimp tool SurePunch® punchdown tool 110 reversible blade PT-510 PowerPlay 18-Tools-in-One (10) RJ45 Cat5e modular plugs Compact zipper case 110 Non-impact punchdown tool 4919 • • • • • • • • 4908 • • • • • 4918 • • • • 125.00 98.00 • • 75.95 4919 4918 Grip Packs 4945 Part # 1116 1925.1 3589 4940 4571 4599 3570 68 Description Data SureStrip Datacom & Telecom Scissors SurePunch® Pro PDT Handle only GripPack Quick Release Tool Holster 110/66 Blade - SurePunch & Pro PDTs LED Light SurePunch Handle PT-540 Hex bit adapter Datacomm Snips Mini Maglite with 2 AA Batteries Black Sharpie® Pen Datacomtools.com TM 4941 • • • • • • • • 121.45 4942 • • • • • • 110.10 4943 • • • • • • • 113.35 4945 4946 • • • • • • • 139.98 • 4946 • 95.95 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply Black Attaché Tool Kits TCMB150ST Contains: - 23 Individual Hand Tools - Popular WP25 Weller® 25 Watt Soldering Iron - 24 Series 99® Interchangeable Screwdriver/Nutdriver Blades & Handles - XL75 Offset Ratchet Screwdriver Set - Measuring Tape - Solder - Length 17 3/4” (451mm) - Width 12 5/8” (321mm) - Depth 4 3/4” (121mm) TCMB100ST Contains: - 53 Individual Hand Tools - 31 Series 99 Interchangeable Screwdriver/Nutdriver Blades & Handles - 2 Specialized Screwdriver and Nutdriver Kits - Length 17 3/4” (451mm) - Width 12 5/8” (321mm) - Height 5 3/4” (146mm) TCMB100STW Contains: - 53 Individual Hand Tools - 31 Series 99 Interchangeable Screwdriver/Nutdriver Blades and Handles - 2 Specialized Screwdriver and Nutdriver Kits - Length 18” - Width 15” - Depth 8” TCMB150ST TCMB100STW TCMB100ST Black Polyethylene Attaché Tool Kit Black Attaché Tool Kit w/Wheels Black Polyethylene Attaché Tool Kit $689.50 $992.25 $856.80 Aluminum Attaché Tool Kits TCA100ST Contains: - 53 Individual Hand Tools - 31 Series 99 Interchangeable Screw/Nutdriver Blades & Handles - 2 Specialized Screwdriver and Nutdriver Kits TCA150ST Contains: - 23 Individual Hand Tools - 24 Series 99 Interchangeable Screw/Nutdriver Blades and Handles - XL70 Offset Ratchet Screwdriver Set - Measuring Tape - Solder TCA100ST TCA150ST Aluminum Attaché Tool Case w/Tools Aluminum Attaché Tool Case w/Tools - Length 17 5/8” (448mm) - Width 12 5/8” (321mm) - Height 7 7/8” (200mm) - Length 17 5/8” (448mm) - Width 12 5/8” (321mm) - Height 5 3/4” (146mm) $1008.00 $798.00 Rugged Codura® Tool Kit TCS100ST Contains: - 53 Individual Hand Tools - 31 Series 99 Interchangeable Screw/Nutdriver Blades and Handles - 2 Specialized Screwdriver and Nutdriver Kits TCS150ST Contains: - 23 Individual Hand Tools - Popular WP25 Weller25 Watt Soldering Iron - 24 Series 99® Interchangeable Screw/Nutdriver Blades and Handles - XL75 Offset Ratchet Screwdriver Set - Measuring Tape - Solder TCS100ST TCS150ST Rugged Cordura Tool Case - with Tools Rugged Condura Tool Kit Major Credit Cards Accepted - Length 17” (432mm) - Width 12” (305mm) - Depth 3 1/4” (83mm) - Length 17” (432mm) - Width 12” (305mm) - Depth 3” (76mm) $768.60 $572.25 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com 69 Basic Data & Video Kit Data/Video Kit - Basic Data and Video Kit - Data T-Cutter - UTP Stripper - Stripmaster wire stripper for RG-6 - Punchmaster II punchdown tool w/110 blade - OmniSeal XL compression tool - TRACETone tone generator & amplifier probe - VDV Multimedia cable tester - Journeyman electrician’s tote 33-916 Basic Data & Video Kit - Data/Video Kit - Data T-Cutter - 7-in-1 Screwdriver - UTP stripper - Coax stripper w/ replacement cartridge - Punchmaster II punchdown tool w/110 blade - 110/66 Blade combo punch down blade - Crimpmaster crimp tool for RJ-45 modular plug - OmniSeal XL compression tool - Probe pic and spudger - Plus Other Items $395.00 RJ-45, RJ-11 Telemaster™ Kit 33-917 Basic termination kit for 10Base-T. - UTP/Coax Stripper - Telemaster RJ-11/RJ-45 Tool - 50 8-Position RJ-45 Non-Keyed Solid Plugs - Durable hard case - Telemaster™ for RJ-11/RJ-45 Plugs - 15 4-Position, RJ-11 stranded modular plugs - 15 6-Position, RJ-11 stranded modular plugs - 15 8-Position, RJ-45 stranded modular plugs - Durable hard case RJ-45, RJ-11 Telemaster™ Kit $68.15 10Base-T Crimpmaster™ RJ-45 Kit 33-750 $240.00 Coax Termination Hip Kit 33-945 Coax Termination Hip Kit $115.00 Lil’ Buttie Pro Telephone Test Set - 30-793 OmniSEAL Pro XL Compression Tool - 45-074 Data T Cutter - 45-603 Coax/UTP Cable Stripper - 89-044 OmniCONN RG-6 Compression F Connectors - 89-572 RG-59 RCA Compression Connectors - 89-582 RG-6 RCA Compression Connectors 33-635 Lil’ Buttie Pro Telephone Test Set Datacomtools.com TM RCA Compression Connector Kit $158.00 High-Powered Telco Field Kit - Lil’Buttie Pro™ with bed-of-nails cord set - Headset and a Two-Piece Belt Clip - High sensitivity tone tracer with a round tip/paddle style tip. - Multi-function turbo-tone™ generator w/alligator clips - 7.5” Cable assembly with 2 no-fault RJ12 connectors - Cordura™ Pouch - LB220 Lil’ Buttie PRO Telephone Test Set - TT100 Tracer Probe, round and paddle-style tips - TG100 Tone Generator - Belt Clip - Mini headset - 1.22m (4ft) RJ11 to angled bed-of-nails cord set - 60.96cm (2ft) RJ11 to alligator clips set - 19cm (7.5 in) RJ12 to RJ12 cable for no-fault connection to RJ11 or RJ45 jacks - Lanyard - Pouch 70 $625.00 - This kit is great for any contractor or installer doing custom Audio/Video installs - 30-793 OmniSEAL Pro XL Compression Tool - 45-074 Data T Cutter - 45-603 Coax/UTP Cable Stripper - 36-240 Cabinet Tip Electronic Screwdriver - Sample pack of RTQ Compression Connectors KP400 Pro Installer Kit RCA Compression Connector Kit Ideal for anyone who is installing security cameras, cable or satellite TV, or working with general coax compression installations. 33-624 $115.00 - Large Mouth Bag - 110/66 Blade - 66 Blade only and Punch master II 110 Blade only - Lever-Snipes Electrician’s Scissors - Probe Pic and Spudger - Two different Strippers - 7-in-1 Twist-a-Nut Screwdriver and Nutdriver - Mag-Tape Tape Measure - Torpedo Level - Plus Other Items - Data T®-Cutter - UTP/Coax Stripper - Crimpmaster™ Frame Only - 8-Position Die Set for RJ-45 Plugs - 200 8-Position RJ-45 Non-Keyed Solid Plugs - Durable hard case 10Base-T Crimpmaster™ RJ-45 Kit Economy 10Base-T Telemaster™ Kit Pro Installer Kit Termination kit for 10Base-T 33-652 $525.00 Economy 10Base-T Telemaster™ Kit Basic kit with multifunctional telephone tool to cut, strip, and crimp. 33-704 Data/Video Kit $255.00 KP401 High-Powered Telco Field Kit $269.95 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply Security/AlarmTone Generator and Tone Tracer Probe Deluxe Resi Kit KP312 - Resi-Tester - Resi-Toner - Resi-Talker Test Set - Resi-Tracer - Replacement #1 Coax Remote Identifier - 12in. Cable Assembly, RJ45/Alligator Clips - Cord Sets - Alligator Clips - 48” Cord Set - Set of 20 (1-20) Coax Remote Identifiers For Resi-Tester™ - TP312: Set of 20 (1-20) RJ45 Wiremappers - Instruction Manual Deluxe Resi Kit $498.00 - TG300 Latch-Test Security/AlarmTone Generator with molded alligator clips cord set - TT100 Tone Tracer Probe, round and paddle-style tips - 19cm (7.5 in) RJ12 to RJ12 cable for no-fault connection to RJ11 or RJ45 jacks - Lanyard - Pouch KP106 Security/AlarmTone Generator & Tone Tracer Probe $135.00 Pro’s Electronic Tool Kit (110V) - Utility component storage box - Long nose plier 135mm - Diagonal cutting plier 110mm - Flat nose plier 135mm - Bent nose plier 130mm - Dual Color Lineman’s plier - Reverse action tweezer - Drill set w/adaptor 110V/220V - 3pcs soldering aid tools - Soldering iron stand with sponge - Adjustable wrench 6” - Soldering iron 110V/220V - Pro-soft s/d 3/16” or 5mm - Pro-soft s/d 1/4” or 6mm - Pro-soft s/d 3.2x75mm - Pro-soft s/d #0x75mm - Pro-soft s/d 5.0x75mm - Pro-soft s/d #1x75mm - Pro-soft s/d 6.0x57mm - Pro-soft s/d #2x57mm - Pro-soft s/d #2x157mm - Pro-soft s/d #1x150mm - Pro-soft s/d 6.0x40mm - Pro-soft s/d #2 x40mm - Crimping tool inch/metric - Desoldering pump - Precision s/d set 6pcs - 5pcs needle file set - Mini-vacuum kit - Cleaning fluid, head (60cc) - Cleaning fluid, head (18cc) - 3-1/2 digital multimeter - Testing screwdriver - IC extractor - Pallet for 1PK-900N - Flash light 1PK-1900NA HDTV Video RF Coaxial Cable Tool Kit Pro’s Electronic Tool Kit (110V) $295.00 Telco Termination Kit - Die Set (SQ.041”,HEX.068”,.178”,.255”,.278”) - Die Set(SQ.042”,HEX.197”,.278”) - Die Set(SQ.042”,HEX.068”,.275”,.278”) - Die Set(SQ.042”,.052”, HEX.068”,.255”,.324”) - Die Set(SQ.042”,HEX.178”,.275”) - Die Set (SQ.042”,HEX.068”,.0178”,.197”,.255”) - Supercrimp Crimp Tool Frame - Rotary Coaxial Cable Stripper(RG-58/59/62/3C/4C) - Forging Cable Cutter (160mm) - All-in-one Toner & Probe Kit PK-4012 - 7pcs folding type hex key set - 3 prong holder - PVC insulated tape - Stainless scissors 6” - Solder core 63%, SN - Bit T10x30mm - Bit T15x30mm - Wrist strap 10FT - Utility knife (3 blades self loading) - 10pcs electronic combination wrench - Hobby vise - Aluminum frame tool case w/1 pallet HDTV Video RF Coaxial Cable Tool Kit - Precision Wire Stripper - Pro-Crimper Modular Tool - UTP/STP Cable Stripper - 6-position 4 contact flat stranded (50 pcs) - 4-position 4 contact flat stranded (50 pcs) - 8-position 8 contact round stranded (25 pcs) - RJ-45 protection cap (20pcs/bag) - Molded Case $229.00 1PK-937E Telco Termination Kit $60.00 Network Maintenance Kit - IC extractor, Folding hex wrench - 6” adjustable wrench - 6” forceps, Inspection mirror - Mini-flashlight - 5” diagonal cutter - Desoldering pump - Wire stripper (AWG 30-20) - 5” snipe nose pliers 500-006 - Rotary coax stripper - Modular plug crimper - Assorted screw drivers - Coax crimper - Soldering iron - Zipper bag Network Maintenance Kit Lan Data Installers Kit $158.00 Cable Service Kit - MT-7068: All-in-one toner & probe kit - CP-373: Pro-crimper modular tool - 8PK-314BR: Impact & punchdown tool - CP-505: Universal stripping tool (UTP/STP, RG59/6/7/11) - 1PK-SD006: 6-in-1 magnetic quick change screwdriver - SR-332: All purpose snip - 9ST-PK4015: Carrying zipper case - Punchdown tool with two blades (110 and 66 Styles) - Ratcheted modular plug crimper - LAN tester with remote - UTP stripper - Assorted modular plugs and boots 500-021 Lan Data Installers Kit Major Credit Cards Accepted $150.00 902-241 Cable Service Kit 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $150.00 71 VoIP Kit - 6” Long nose plier - 6” Side cutting plier - Utility component storage box - Probe-pic spudger - 6 In 1 magnetic quick change screwdriver - Telecom mini-test set - Connector-crimping plier - Double end socket can wrench - 3 in 1 Wire stripper tool - In-line modular adapters 4/6/8 pin 902-299 - All-in-one toner & probe kit - Punch down tool with 110/66 blades - 4P/6P/8P telcom crimping tool - Deluxe portable tool bag • Case size: 390x250x245mm (15.4”x9.8”x9.6”) • Individual packing: Color label+shink VoIP Kit $435.00 Electronics Master Kit (110V) - Utility component storage box - Long nose plier 135mm - Diagonal cutting plier 110mm - Dual Color Lineman’s plier - Bent nose plier 130mm - Side cutting plier 150mm - Dual Color Long nose plier - 3pcs soldering aid tools - Soldering iron stand with sponge - Adjustable wrench 6” - Soldering iron 110V or 220V - Pro-soft s/d 3/16” or 5mm - Pro-soft s/d 1/4” or 6mm - Pro-soft s/d 3.2x75mm - Pro-soft s/d #0x75mm - Pro-soft s/d 5.0x75mm - Pro-soft s/d #1x75mm - Pro-soft s/d 6.0x100mm - Pro-soft s/d #2x100mm - Pro-soft screwdriver 6.0x40mm - Pro-soft screwdriver #2 x40mm - Desoldering wick - 6pcs electronic screwdriver set - Crimping tool inch/metric - Desoldering pump - 5pcs needle file set - Testing screwdriver - Alignment tool (200mm/2.0mm) - IC extractor - 7pcs Folding type hex key set - 6pcs open-end wrench set - Heavy Duty Claw Hammer - PVC insulated tape 1PK-1700NA - Stainless scissors 6” - Solder core 63%, SN - Parts tube - Heat sink - Utility knife (3 blades) - Measuring tape 3M/10FT - Inspection mirroe - Slip-channel pump pliers 254mm - Pallet for 1PK-1700N serios - Top Pallet for 1PK-1700N serios - Carrying tool case Electronics Master Kit (110V) $225.00 Telecom Installation Kit - PM-736: Dual color long nose plier 136mm - PM-737: Dual color diagonal cutting Plier 125mm - CP-376KX: Professional Modular Crimps Strips & Cuts tool - CP-3140: Punch down tool 110 blade - MT-7051N: Multi-modular cable tester - MT-8001: Butt Set - SD-202A: Pro-soft screwdriver 5x75mm - SD-207A: Pro-soft screwdriver 6x100mm - SD-207B: Pro-soft screwdriver #2x100mm - SD-220B: Pro-soft screwdriver #2x40mm - ST-2012H: Soft side tool pouch (305x235x95mm) - Individual packing: Color Box PK-12012H Computer Service Tool Kit Computer Service Tool Kit - 3 Piece Anti-Static Align Tool - Precision Wire Stripper - 4” Micro Cutting Pliers - 7 Piece Folding Hex Wrench - 5” Electricians Scissors - 6 Piece Screwdriver Set - Punchdown Tool w/110 Blade - Plus Other Items $52.99 Premise Pro Kit 500-043 72 Computer Maintenance Kit $458.00 Communications Maintenance Kit - 4P/6P/8P telcom crimping tool - Punch down tool with 110/66 blades - All-in-one toner & probe kit - In-line modular adapters 4/6/8 pin 3 in 1 - Compression tool for RG59/RG6/RG11 type waterproof connectors - Universal stripping tool(UTP/STP/RG-59/6/7/11) - Zipper bag 902-296 $199.00 Computer Maintenance Kit - 5” Diagonal Cutter - 5” Long-Nose Pliers - All-in-One Crimp Tool - Tweezers - IC Extractor and Inserter - Desoldering Braid & Solder - 8-Bit Pack - Plus Other Items 500-003 Telecom Installation Kit Premise Pro Kit Datacomtools.com $375.00 TM - 5” Cutters - 5” Needle-Nose Pliers - 5” Micro Cutters - 6” Adjustable Wrench - Wire Stripper/Cutter - Quick Heat Soldering Iron - Desoldering Braid - PLCC Extractor - Plus Other Items 500-026 Communications Maintenance Kit $140.00 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply Basic Twisted Pair & Coax Kit Master Network Installation Kit Features the EZ-RJ45® Crimp Tool & connectors for the simplest, fastest & performing installation of Category 5/5e networks. Includes the tools for CATV installations. - “Super Crimp” Frame - RJ45, RJ22, & RJ11 Die Set, - RG58, RG59, 62 BNC, TNC Die Set - RG58, RG59, 62 A/U Die Set - Punchdown w/110/66 Blades - Rotary Coax Stripper - Cable Cutter - Plus Other Items 500-020 Master Network Installation Kit - Punchdown tool with 110 blade - EZ-RJ45® Crimp Tool - Cable Cutter - Cat5 Jacket Stripper & Universal Coax Cable Stripper - F Connector Assembly/Removal Tool - 10 EZ-RJ45® Connectors and a nylon zippered case 90121 $499.00 Twisted Pair Termination Kit This kit includes all of the necessary tools for twisted pair and coaxial terminations. - SealSmart Compression Crimp Tool. - EZ-RJ45® Crimp Tool. - F Connector Assembly/Removal Tool. - Coax and Round Wire Cable Cutter. - Cat5 Jacket Stripper & Universal Coaxial Cable Stripper. - Punchdown Tool w/110 style blade and a nylon zippered case. - Punchdown tool with 110 style blade. - EZ-RJ45® Crimp Tool. - BTP-6 Coax & Data Cable Cutter. - Cat 5 Cable Jacket Stripper. - 10 EZ-RJ45® Connectors & a nylon zippered case. Twisted Pair Termination Kit 90124 $153.00 Master Electrician Tool Kit Qty Includes: - Bags & holsters: 3 - Pliers: 4 - Wire Strippers: 3 - Screwdrivers: 6 - Knives: 1 - Hacksaws: 1 - Awl: 1 - Wrench: - Hex Key: - Tape measurer: - Levels: - Hammers: - Gloves: - Testers: Qty 1 1 1 1 1 1 1 Qty Includes: - Bags & holsters: 1 - Pliers: 4 - Wire strippers: 3 - Screwdrivers: 4 Master Electrician Tool Kit - Tape measurer: - Levels: - Hammers: - Testers: Qty 1 1 1 1 - Weight: 9.7lbs 0159-12 $404.95 Electricians Tool Kit Journeyman’s Tool Kit $259.00 Starter Electrician’s Tool Kit Perfect kit for the professional or apprentice electrician. Includes: - Pouch & belts: - Pliers: - Wire strippers: - Screwdrivers: - Tape measurer: Perfect kit for the beginner electrician. Four pocket heavy duty tool leather tool pouch holds an assortment of four professional hand tools. Qty 2 4 1 6 1 Includes: - Bags & holsters: - Pliers: - Wire strippers: - Screwdrivers: Electricians Tool Kit Qty 1 1 1 2 - Weight: 2.25lbs - Weight: 7.75lbs $180.00 Master Electrician’s Kit 0159-14 Starter Electrician’s Tool Kit $62.95 Large Mouth 20” Kit Includes: - Bags & holsters - Pliers - Wire strippers - Screwdrivers - Knives - Hammers - Testers - Tape measurer - Levels 35-809 $205.00 Perfect Kit for the Journeyman Electrician. - Weight: 19.7lbs 0159-13 PRO Twisted Pair & Coaxial Tool Kit Journeyman’s Tool Kit Designed with the Master Electrician in Mind. 0159-11 $169.00 PRO Twisted Pair & Coaxial Tool Kit The perfect solution when working with twisted pair cable for telephone and data communications installations. 90122 Basic Twisted Pair & Coax Kit Master Electrician’s Kit Major Credit Cards Accepted Qty 1 3 2 6 1 1 1 1 1 $507.55 Includes: - Bags & holsters - Pliers - Wire strippers - Screwdrivers - Crimp tools - Knives - Hammers - Pullers - Tape measurer - Hacksaw 35-808 Large Mouth 20” Kit 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com Qty 1 3 2 4 1 1 1 1 1 1 $313.99 73 Journeyman Electrician’s Kit Electrician’s Standard Tool Pouch Tool Kit Includes: - Bags & holsters - Pliers - Wire strippers - Screwdrivers - Knives - Levels - Pullers - Tape measurer Journeyman Electrician’s Kit 35-790 12-Piece Set WM $430.00 Qty 2 4 1 4 1 12-Piece Set $220.00 5-Piece Set 6-Piece Hip Kit Qty 1 1 1 1 1 1 Qty 1 1 1 2 Includes: - Bags & holsters - Pliers - Wire strippers - Screwdrivers 35-5792 $95.65 5-Piece Set $57.40 O LS N I NC Tool Holsters & Bags D OT TO 35-805 $185.50 Includes: - Bags & holsters - Pliers - Wire strippers - Screwdrivers - Knives - Tape measurer LUDE Multi-Purpose Tool Holder Securely holds small tools 3-Pockets CLC1103 $6.25 Multi-Purpose Tool Holder Securely holds small tools 4-Pockets CLC1104 $7.15 Cell Phone/Tool Holder Holds compact cell phones. Securely holds small tools 5-Pockets CLC1105 $15.05 Electrical/Maintenance Pouch 3 Internal pocket sleeves and 6 external pockets. CLC1503 $18.50 25 Pocket BriefBag 25 Multi-use pockets for tools and business accessories W: 16” H: 12 1/2” D: 1 1/2” CLC1122 $39.05 O LS N Tool Bags D I NC OT TO Includes: - Bags & holsters - Pliers - Wire strippers - Screwdrivers - Tape measurer Qty 2 4 1 4 1 6-Piece Hip Kit 35-794 Electrician’s Standard Tool Pouch Tool Kit 12-Piece Set Includes: - Bags & holsters - Pliers - Wire strippers - Screwdrivers - Tape measurer 35-5805 35-800 $270.00 12-Piece Set WM Qty 1 4 2 3 1 1 1 1 2 Includes: - Bags & holsters - Pliers - Wire strippers - Screwdrivers - Deburring tool - Hammer - Tape measurer - Knives - Tester Qty 1 3 1 4 1 1 1 1 LUDE Two Bag Combo One: 12” x 4 1/2” x 5 1/2” One: 14” x 5 1/2” x 6” CLC1107 74 $19.65 24” All Purpose Gear Bag All-purpose gear bag perfect for carrying kneepads, power tools, extension cords, etc. L: 24” W: 12” D: 12” CLC1111 Datacomtools.com TM $37.85 Extra Large Tote Bag 17 Multi-use outside pockets organize tools and accessories. L: 18” W: 7” H: 9” CLC1113 $25.95 Double Zipper Tote Bag 9 Multi-use pockets inside 41 outside organize tools. L: 18” W: 6” H: 9” CLC1115 $37.85 Standard Tool Tote 8 multi-use pockets inside 8 outside to organize tools. L: 14” W: 5 1/2” H: 6” CLC1116 $21.20 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply I NC Tool Bags and Cases D TO OT O LS N LUDE 33 Pocket Small Tote Bag 11 Multi-use pockets inside and 22 outside L: 11” W: 4” H: 8” CLC1126 $23.70 12” Tote Bag w/Top Plastic Tray 3 Pockets Inside & 3 Outside L: 11” W: 9” H: 10” 1533 $34.95 20” Open Top Softsided Tool Box 27 Multi-use pockets & 6 webbing loops. L: 20“ W: 11” H: 11” CLC1579 $82.35 12” Standard BigMouth™ Bag 17 Pockets Inside & 6 Outside L: 12” W: 8.5” H: 8” CLC1161 $25.45 18” Tote Bag w/Swivel Parts 14 Multi-use outside pockets & 8 inside pockets L: 18” W: 9” H: 11 1/2” 1544 $54.35 Electrical/Maintenance Tool Carrier Pockets for drill bits and tips, cell phone, electrical tester, strap, etc. L: 23” W: 12” H: 15” CLC1530 $65.15 49 Pocket Tote-In-A-Bag 75 Pocket-Tool Backpack Outside Bag: 2 inside pockets & Enough interior panels to hold a multi14 outside pockets tude of tools including: 14 pc wrench Small Inside Tote: 11 inside pockets sets, electric drills and much more. & 22 outside pockets W: 13” H: 17 1/2” H: 9” CLC1127 $50.85 CLC1132 $155.00 Electrical/Maintenance Tool Carrier Electrical/Maintenance Tool Pouch 23 Pocket Box-shaped design 27 Pocket Box-shaped design prevents tipping. prevents tipping. L: 8” W: 8” H: 15” CLC1527 $41.70 CLC1526 $49.10 Major Credit Cards Accepted 18” Megamouth Tote Bag 13 Multi-use pockets inside & 18 outside L: 18” W: 11” H: 12” CLC1163 $58.35 16” Tote Bag w/Top Plastic Tray 10 Pockets inside & 13 pockets outside L: 16” W: 8” H: 11” 1534 $48.95 14” Open-Top Soft Sided Tool Box 21 Multi-use pockets & 10 webbing loops L: 14“ W: 11” H: 11” CLC1578 $65.15 18” Multi-Compartment Carrier 54 Pockets Inside & 4 Outside L: 18” W: 7” H: 14” 1539 $84.95 Large Electrical/Maintenance Carrier 16 Multi-use outside pockets & 7 inside L: 11” W: 10” H: 19” CLC1528 $54.60 24” Roller Tote Bag 23 Multi-use pockets inside & 7 outside L: 24” W: 11” H: 12” CLC1167 $78.90 Standard BigMouth Bag 11 Multi-use pockets inside & 22 outside L: 14” W: 7” H: 10” CLC1135 $31.85 18” Softsided Tool Box 21 Multi-use outside pockets & 12 inside pockets L: 18” W: 9 1/2” H: 14” 1572 $54.95 13” Multi-Compartment Carrier 23 Pockets Inside & 10 Outside L: 13” W: 7” H: 13” 1537 $55.98 18” Tote Bag w/Top Plastic Tray 13 Pockets Inside & 24 Outside L: 18” W: 11” H: 11” 1535 $55.95 Large BigMouth Bag 13 Multi-use pockets inside & 26 outside L: 18” W: 8” H: 12” CLC1136 $43.80 12” Softsided Tool Box 12 Multi-use outside pockets & 8 inside pockets L: 12” W: 8 1/2” H: 14” 1570 $39.99 Open-and-Closed-Top Tool Carrier Closed zipper compartment includes 16 open pockets & elastic strap for hex bit storage L: 13” W: 7” H: 12” CLC1574 $58.70 Open Top Tool Bag w/Molded Base Zipper Top Carrier w/Molded Base 12 External pockets, including 2 over12 External pockets, including one size pockets & one closed flap pocket. closed flap pocket. Interior includes 5 pockets, 6 webbing 8 Inside pockets, with 4 webbing loops, & elastic strap for hex bit storage. loops and a zipper pocket. CLC1581 $75.75 CLC1582 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $75.75 75 I NC Tool Bags and Cases D TO OT O LS N LUDE Triple Zippered Tool Carrier 18 Multi-use outside pockets & 9 inside pockets L: 10” W: 10” H: 11” $38.40 CLC1108 CLC1148 $19.65 48 Pocket - Bucket Pockets 14 Double row pockets inside & 34 triple row outside pockets CLC1119 $18.55 30 Pocket Bucket Pockets 16 Multi-size pockets inside & 14 outside CLC1117 $18.65 Tool Bags and Cases D I NC LUDE Mechanic’s Tool Bag 8 Pockets Inside & 2 Outside Available in four colors MTB-XX* Field Service Tech Case One side features 39 sewn in tool pockets and one large pouch with 3 more storage pouches. Outside has 2 pockets with hook and loop flaps. Shoulder strap included. $21.25 695ZT Pallets Nylon Zipper Tool Case The 651ZT single zipper holds two pallets. Shoulder strap included. Outside has 2 hook and loop closure pockets 660ZT $78.00 LAN Telecom Case 40 sewn in tool pockets, 4 pouches in one side, 11 sewn in tool pockets. Outside has 2 pockets w/hook & loop flaps. Shoulder strap included. 688ZT $170.00 Master Technician Case 47 tool pockets, 3 meter pouches, & shoulder strap. Available in Black, Blue, Burgundy, Green 669ZT $110.00 Pro Telecom Case Holds all of the standard tools: Screwdrivers, Marks, Probes, Punch tools, Pliers, A level, Strippers, Test adapters, Cable tester, and much more! 680ZT $148.65 Master Telecom Case 24 Sewn Interior Pockets, 5 Small Parts Pouches, Special Pockets for Tone Generator and Probe Set, & Velcro Strap “Buttset” Holder 685ZT $125.00 Telecom Case Includes: Velcro Strap “Buttset” Holder, 20 Sewn Tool Pockets, & 1 Parts Pouch 630ZT $84.95 Machine/Copy Repair Field Service Outside has 2 pockets with hook and loop flaps and a full-length document pocket to provide additional storage capacity. 641ZT $110.00 OT O LS N Tuff-Tote™ Tool Carriers & Pouches D I NC LUDE Combo Tool & Attache/Notebook This case contains 47 tool pockets and a meter pouch plus a padded pocket for your computer. 2 outside meter pouches & shoulder strap. 689ZT $188.00 TroubleShooter Tool Case 29 sewn tool pockets, & 3 meter pouches Available in Black, Green, Blue & Burgundy $128.45 TO 651ZT-2 $174.95 Ideal Tuff-Tote™ Carriers & Tool Pouches are also offered in black Tuff-Tote™ Ultimate Tool Carriers 2 divided inside compartments w/6 screwdriver loops, A large center compartment, 4 outside pockets & 8 outside tool loops. 35-975 $215.00 Tuff-Tote™ Tool Carriers 6” x 8” Tool carrier w/4 center screwdriver slots, 2 interior compartments, 2 divided outside pockets & 4 outside tool loops 35-969 $158.00 Tuff-Tote™ Tool Pouches 8-Pocket pouch features large utility compartment with 2 dividers and 6 screwdriver loops, 7 outside pockets release snaps and tape chain 35-950 35-975BLK 35-950BLK $215.00 $109.89 $109.89 O LS N Tool Bags and Cases D I NC OT TO $9.15 Drawstring Bucket Bag 6 Pockets Inside & 16 Outside O LS N OT TO CLC1538 3 Multi-purpose, Clip-On Bag Combo One 4” x 3” x 9” Bag One 3 1/2” x 2 1/2” x 8” Bag One 3” x 2” x 6 1/2” Bag LUDE 20” Electrician’s Bag Constructed of canvas, Contains 16 interior & exterior pockets L: 20” W: 12” H: 10” 0158-11 76 $82.05 18” Multi-Pocket Bag Constructed of nylon, 31 multi-use reinforced pockets, inside & out. L: 18” W: 11” H: 10” 0158-12 Datacomtools.com TM $41.00 11” Condura Open Tool Carrier Constructed of double-layer of Cordura, 37 pockets inside & out. L: 11” W: 9” H: 10” 0158-13 $78.48 20 - Pocket Tool Caddy Constructed of double-layer of Cordura, 20 pocket inside & out. L: 10” W: 7” H: 13” 0158-15 $51.25 Heavy-Duty 8-Pocket Leather Pouch Large main pocket area for easy storage, & 4 smaller compartments. L: 7” W: 6” H: 10 1/2” 0258-11 $41.95 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply I NC Tool Bags and Cases D TO OT O LS N LUDE 45” Cordless Drill Holster Fits most 1/4” - 3/8” drills 2 Pockets hold bits, pencils, etc. Fits belts up to 2 1/2” wide. $18.95 902 Plier Holder Fits narrow-type hand tools up to 10” Fits belts up to 2 1/4” wide $9.95 767 $5.89 Plier/Tool Holder open-bottom design holds variety of tools Fits belts up to 2 3/4” wide 417 Economy Plier/Tool Holder Fits narrow-type hand tools up to 10” Fits belts up to 2 3/4” wide $6.50 328 $4.85 O LS N Tool Bags and Cases Heavy-Duty Polyethylene Cases D I NC OT TO DRL91 2 Pocket Tool/Plier Holder 2 Front tool snaps Fits belts up to 2 1/4” wide LUDE Tool/Utility Knife Sheath Holds knives and narrow tools Fits belts up to 2” wide 449 $5.65 Steel Loop Hammer Holder Cradle design eliminates pivoting Fits belts up to 2 3/4” wide 439 16’ - 30’ Measuring Tape Holder Molded leather retains shape Fits belts up to 2 3/4” wide $4.75 464 $8.95 Heavy-duty aluminum rim with black trim & gasket, cast chrome key locks, full-length piano hinge, & golf grip handle. Case contains standard pick-n-pluck cubed foam. L: 21 1/2” W: 15 1/2” D: 9” 221609 $199.00 Heavy-duty aluminum rim with black trim and gasket, cast chrome key locks, full-length piano hinge, and deluxe golf grip handle. L: 19 5/8” x W: 13 3/4” x D: 7” 201407 $159.00 Heavy-Duty Polyethylene Cases Heavy duty aluminum rim w/black trim & gasket, cast chrome key locks, full piano hinge, & golf grip handle. Case contains pick-n-pluck cubed foam. Includes wheels & telescoping handle. L: 21 1/2” x W: 15 1/2” x D: 9” 221609H $280.00 Heavy duty aluminum rim w/black trim & gasket, cast chrome key locks, full piano hinge, & golf grip handle. Includes wheels & telescoping handle. L: 19 5/8” x W: 13 3/4” x D: 7” 201407H Heavy-duty aluminum rim w/black trim & gasket, cast chrome key locks, full-length piano hinge, & golf grip handle. This contains our standard pick-n-pluck cubed foam. L: 18 1/2” x W: 12 1/2” x D: 7” $239.00 181307 $148.00 Heavy Duty Cases Heavy-duty aluminum rim with black trim and gasket, cast chrome key locks, full-length piano hinge, and deluxe golf grip handle. Cubed foam set included. L: 27 1/2” x W: 19 1/2” x D: 7” 282007 $245.00 Heavy-duty aluminum rim w/black trim & gasket, cast chrome key locks, full-length piano hinge, & golf grip handle. This case contains our standard pick-n-pluck cubed foam. L: 23 3/4” x W: 17 3/4” x D: 9” 241809 $219.00 Medium Duty Cases Heavy-Duty Polyethylene ATA Cases with Recessed Hardware. The exterior shell is tough impact resistant HMW polyethylene. Heavy-Duty aluminum rim and gasket, black trim, combination lock, full length piano hinge and spring loaded handle. Modern look of heavy duty grained ABS with extruded aluminum frame, deluxe golf grip handle, cast chrome key locks and piano hinge. This case has a light duty valance. Series includes wheels and telescoping handle for convenient transportation. Part # 201409A 221609A 201409AH 221609AH 241811AH 202014AH 282011AH 261613AH 261617AH Inside Dimensions Price 19 5/8”L x 13 3/4”W x 9”D 21 1/2”L x 15 1/2”W x 9”D 19 5/8”L x 13 3/4”W x 9”D 21 1/2”L x 15 1/2”W x 9”D 23 3/4”L x 17 3/4”W x 11”D 20”L x 20”W x 14”D 27 1/2”L x 19 1/2”W x 11”D 26”L x 16”W x 13”D 24”L x 24”W x 16”D $235.00 $255.00 $330.00 $345.00 $360.00 $378.00 $385.00 $390.00 $405.00 Light-Duty ABS Series Case contains standard pick-n-pluck cubed foam. Part # Inside Dimensions Price 2005 2007 2207 2407 2807 20”L x 14”W x 5”D 20”L x 14”W x 7”D 22”L x 16”W x 7”D 24”L x 18”W x 7”D 28”L x 20”W x 7”D $118.00 $130.00 $150.00 $170.00 $195.00 Blow-Molded Cases Light-duty, black, scuff resistant molded ABS thermoplastic forms the tough shell of these cases. Extruded aluminum rim, drawbolt key locks, and strong molded handle. * 1425 has medium-duty valance These cases are manufactured from prime, high-density polyethylene. The textured exteriors resist dents, cracking and scuffs. The shells are unaffected by extreme temperatures. Part # Inside Dimensions Price Part Inside Dimensions 1412 1414 1416 1419 1425 1426 1705 12”L x 8”W x 5”D 12”L x 11”W x 5”D 16”L x 12”W x 5”D 18”L x 13”W x 5”D 18”L x 13”W x 7”D 16”L x 12”W x 7”D 17”L x 11”W x 5”D $58.00 $65.00 $69.00 $75.00 $99.00 $84.00 $90.00 107 207 307 407 507 607 707 7 1/2”L x 5”W x 2 3/16”D 9 1/2”L x 6”W x 2 11/16”D 11”L x 7”W x 3 7/16”D 12 3/8”L x 8 7/8”W x 5 1/8”D 13 7/8”L x 9 7/8”W x 4”D 15 7/8”L x 10 7/8”W x 2 7/8”D 17 7/8”L x 12 3/4”W x 7 1/8”D Major Credit Cards Accepted 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com Price $14.00 $17.20 $25.00 $33.35 $40.45 $38.75 $77.50 77 Greenlee MagnumPro Fish Tape Steel Stainless Steel All MagnumPRO™ Fish Tapes Feature: - Advanced comfort grip and rugged case design - Superior rapid grip tape payout and rewind - Viewing ports to see amount of tape in case and allow quick debris removal. - Steel: Used for general fishing in conduit Maximum durability Improved low profile tip for easy fishing through all sizes of conduit Available in 50’, 65’, 125’ and 240’ length 1/8”, 1/4” and flat steel profiles to accommodate different fishing situations - Stainless Steel: Used in general fishing in conduit & harsh environmental situations Corrosion free stainless steel tape for maximum life Fish further and faster with Speed Flex Leader Available in 100’ and 200’ lengths Replaceable Speed Flex Leader Flexible Steel Cable: More flexible than steel, stronger than fiberglass or nylon and slips through later and vertical bends in the same run - Multi-strand steel cable for maximum flexibility - Available in 50’ and 100’ lengths Flexible Steel - FiberGlass: Used in proximity to energized lines and where good flexibility is desired Non-conductive fiberglass tape with patented low-friction coating for faster and easier fishing Perfect for fishing in conduit with wire or cable present Available in 50’, 100’, 200’, and 250’ lengths Replaceable tips FTS438-65 FTS438-125 438-5H FTSS438-100 FTSS438-200 FTFS439-50 FTFS439-100 FTF540-50 FTF540-100 FiberGlass 1/8” x 65’ - Steel Fish Tape 1/8” x 125’ - Steel Fish Tape 1/8” x 50’ - Steel Fish Tape 1/8” x 100’ - Stainless Steel Fish Tape 1/8” x 200’ - Stainless Steel Fish Tape 3/16’ x 50’ - Flexible Steel Fish Tape 3/16” x 100’ - Flexible Steel Fish Tape 11/64” x 50’ - Fiberglass Fish Tape 11/64” x 100’ - Fiberglass Fish Tape $31.70 $57.25 $19.85 $65.31 $85.25 $91.65 $147.15 $135.40 $183.95 Zoom Fish Tapes - Translucent, impact-resistant case shows precisely how much tape is left. Large Tuff-Grip™ handle provides secure grip, accommodates large gloved hands. Zoom™ Tape’s tough outer nylon jacket offers abrasion resistance, with enhanced lubricity resin additives. Zoom™ Tape’s 3/32” round, 19 strand preformed core handles tight bends and tough pulls by providing omni-directional (all directions) flexibility to change planes in conduit runs. - 304 Grade Stainless Steel (Cutlery Grade) assures long, rust-free performance. - Can be used in aqueous pulling lubricants and wet conduit runs without concern about rusting. 3/16” x 50’ Zoom Fish Tape 3/16” x 100’ Zoom Fish Tape 3/16” x 200’ Zoom Fish Tape 31-090 31-092 31-096 Spiral Wrap - Harness cables into a single manageable bundle. - Allows breakouts of cables. - Provides protection - Easy identification of cable - Installation tool supplied. - Bundle Range: 0.38” - 4.00” - 100’ reel for easy handling 78 T50F-C T50F-C0 T50F-C1 T50F-C2 T50F-C3 T50F-C4 T50F-C5 T50F-C6 T50F-C7 T50F-C8 T50F-C10 T50F-C16 T50FR-C T50FR-C20 Natural Polyethylene Black Polyethylene* Brown Polyethylene Red Polyethylene Orange Polyethylene Yellow Polyethylene Green Polyethylene Blue Polyethylene Purple Polyethylene Gray Polyethylene White Polyethylene Pink Polyethylene Natural Polyethylene** Black Polyethylene** 1 roll 1 roll 1 roll 1 roll 1 roll 1 roll 1 roll 1 roll 1 roll 1 roll 1 roll 1 roll 1 roll 1 roll $135.00 $169.00 $155.00 $155.00 $155.00 $155.00 $155.00 $155.00 $155.00 $155.00 $155.00 $155.00 $225.00 $255.00 *Weather Resistant **Flame Retardant Flame retardant products are UL94V-O rated Datacomtools.com TM $90.90 $114.95 $192.00 Loom Tubing Solid Wall CLTS25F-C3 CLTS38F-C3 CLTS50F-C3 CLTS75F-C3 CLTS100F-C3 CLTS125F-L3 CLTS150F-D3 CLTS25F-C CLTS38F-C CLTS75F-C CLTS100F-C CLTS125F-L 0.28” 0.42” 0.51” 0.76” 0.92” 1.29” 1.48” 0.28” 0.42” 0.76” 0.92” 1.29” 0.39” 0.56” 0.67” 0.94” 1.09” 1.50” 1.73” 0.39” 0.56” 0.94” 1.09” 1.50” 100’ 100’ 100’ 100’ 100’ 50’ 500’ 100’ 100’ 100’ 100’ 50’ 1 roll $38.00 1 roll $45.00 1 roll $48.00 1 roll $68.00 1 roll $88.50 1 roll $55.00 1 roll $460.00 1 roll $33.10 1 roll $39.10 1 roll $59.60 1 roll $76.90 1 roll $47.45 Slit Wall CLT25F-C3 CLT38F-C3 CLT50F-C3 CLT75F-C3 CLT100F-C3 CLT125F-L3 CLT150F-X3 CLT188F-X3 CLT25F-C20 CLT38F-C20 CLT50F-C20 CLT75F-C20 CLT100F-C20 CLT125F-L20 CLT150F-T20 CLT150F-X20 CLT188F-X20 CLT150F-X4 CLT188F-X4 0.27” 0.41” 0.51” 0.76” 0.92” 1.29” 1.55” 1.88” 0.27” 0.41” 0.51” 0.76” 0.92” 1.29” 1.55” 1.55” 1.88” 1.55” 1.88” 0.39” 0.56” 0.67” 0.94” 1.09” 1.50” 1.86” 2.17” 0.39” 0.56” 0.67” 0.94” 1.09” 1.50” 1.86” 1.86” 2.17” 1.86” 2.17” 100’ 100’ 100’ 100’ 100’ 50’ 10’ 10’ 100’ 100’ 100’ 100’ 100’ 50’ 200’ 10’ 10’ 10’ 10’ 1 roll $38.00 1 roll $45.00 1 roll $48.00 1 roll $68.00 1 roll $000.00 1 roll $55.20 1 roll $29.25 1 roll $37.70 1 roll $33.10 1 roll $39.10 1 roll $41.45 1 roll $59.60 1 roll $76.90 1 roll $47.45 1 roll $210.00 1 roll $25.45 1 roll $32.75 1 roll $25.25 1 roll $37.70 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply Creep-Zit 81-000: Creep-Zit™ Pro 36ft. Kit - Threaded Connector Wire Running Rod Kit Includes: - Five FiberFuse™ 6ft. push/pull rods with male and female threaded connector ends - One Luminous FiberFuse™ 6ft. push/pull rod with male and female threaded connector ends - One 6ft. Fish Tailz™ 1/8” Mesh Pull Sock - Whisk Threaded Tip - Ball Chain Threaded Connector Tip (12” ball chain length) - Female Bull Nose Threaded Connector Tip - Kit is packaged in a clear square plastic tube 81-130: Creep-Zit™ 30ft. Kit - Threaded Connector Wire Running Rod Kit Includes: - Four FiberFuse™ 6ft. push/pull rods with male and female threaded connector ends - One FiberFuse 6ft. push/pull rod with a fixed bull nose end and a female threaded connector end - Whisk Threaded Connector Tip - Ball Chain Lanyard (12” length) - Kit is packaged in a clear square plastic tube Creep-Zit™ 36” Kit 81-230: Creep-Zit™ 30ft. Luminous Kit - Threaded Connector Wire Running Rod Kit Includes: - Four Luminous FiberFuse™ 6ft. push/pull rods with male and female threaded connector ends - One Luminous FiberFuse 6ft. push/pull rod w/a fixed bull nose end & female threaded connector end - Whisk Threaded Connector Tip - Ball Chain Lanyard (12” length) - Kit is packaged in a clear square plastic tube 81-000 81-130 81-230 Creep-Zit™ Pro 36ft. Kit - Threaded Connector Wire Running Rod Kit Creep-Zit™ 30ft. Kit - Threaded Connector Wire Running Rod Kit Creep-Zit™ 30ft. Luminous Kit - Threaded Connector Wire Running Rod Kit $83.95 $74.95 $92.40 Creep-Zit™ 30ft Kit Fishing Poles / Stix - Fish Poles Features: Designed specifically for pushing and pulling wires over long distances. Push or pull wires over suspended ceilings, under sub-floors or crawl spaces and in attics. Non-conductive, high-impact construction. Specialized hook can be used to install wires in suspended ceilings. Velcro strap secures pole when in collapsed position. Self-contained, no loose parts. Lightweight design to minimize fatigue. - Fish Stix Features: 1/4” (6.4 mm) diameter fiberglass rods provide added rigidity when multiple sections are connected. 200 lbs. (0.9 kN) minimum pulling strength. Two different threaded tips accommodate various bundles of wire or cable. 540-24 includes one 3’ Glo Stix™ section for improved tip visibility. 540-12 includes (3) 4’ fish stix sections 540-24 includes (3) 6’ fish stix sections and (1) 3’ fish stix section Fish Poles Glo-Stix Features: - Luminescent fiberglass rods glow in the dark to make fishing voice, data and video wires easier in dark spaces, such as above ceilings, in walls, and below sub-floors. - More flexible for fishing in walls through outlet box holes. - Sturdy, steel-threaded connectors are interchangeable with Green- lee - 1/4” Fish Stix. -Clear, non-metallic storage tube keeps Glo Stix charged. - 200 lbs. maximum pulling strength. - 540-6: Kit includes a bullet nose and “J” hook threaded tips, packaged in a plastic tube - 540-15: Kit with fixed bullet nose on both ends 02268/FP12 10442/FP18 10443/FP24 540-12 540-24 540-6 540-15 Fish Pole 12’ Fish Pole 18’ Fish Pole 24’ 12’ Greenlee Fish Stix 24’ Greenlee Fish Stix Glo Stix 6’ (4.0 mm x 1.8 m) Glo Stix 15’ (4.7 mm x 4.6 m) Major Credit Cards Accepted $50.69 $77.65 $131.50 $43.05 $75.93 $6.80 $48.55 Fish Stix Glo Stix 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com 79 EZ-RJ45 Connectors Slide wires thru the EZRJ45 Connector Arrange wires in the proper order Twist the wires and slide the connector into the cable jacket for a tight fit. Crimp & Finished!! 1) Save the cable jacket and separate the four cable wires 2) Slide the cable jacket between the twisted pairs 3) Untwist the wire by pushing the wire in the opposite direction of the twist. 4) When you reach the end, pinch the wire inside and pull outward to straighten. The EZ-RJ45 Connectors, simplify twisted pair terminations by allowing the wire to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. It also guarantees that the wires will be properly flush to the front of the connector. 202003J 202035J 202010J 202036J EZ-RJ45® Connectors, 100 Pc. Jar Strain Relief for EZ-RJ45® Cat 5e Connector. Jar of 100 EZ-RJ45® Cat 6+ Connectors, 100 Pc. Jar Strain Relief EZ-RJ45® Cat 6+ Connectors & Shielded Cat 5e Connector, Jar of 100 $62.00 $24.00 $70.00 $24.00 TeleMaster™ Crimp Tool Kit - Tool for RJ-11(1,2,3 pair) & RJ-45 (4 pair) plugs - 10 x 4-Position, RJ-11 Stranded Modular Plugs - 10 x 6-Position, RJ-11 Stranded Modular Plugs - 10 x 8-Position, RJ-45 Stranded Modular Plugs 33-700 TeleMaster™ Crimp Tool Kit $54.45 15015 Crimp Tool for EZ-RJ - Tool steel die head assembly provides 360° of connector support during crimp. $11.95 100054C $86.95 All-in-One Ultra Telephone Tool Our best all-in-one tool! Professional crimping tool for either AMP/Tyco or Western Electric/ Stewart Stamping, type, 4-, 6-, & 8-position modular plugs. All-in-one crimping tool for Western Electric (WE)/Stewart Stamping (SS)-type, 6- and 8- position modular telephone plugs. Cuts and strips. Ratchet-controlled to master the tension of the tool for ease of use. Ratchet Telemaster - Ratchet version of popular IDEAL Telemaster™ Tool. for RJ-45 and RJ-11 modular plugs. - Multi-function telephone tool cuts, strips, & crimps. - Repeatable crimp action for high quality connections - Embedded flat cable cutter and stripper. - Crimps 8- position RJ45 connectors and 4- and 6- position RJ11 and RJ12 connectors. - Crimps AWG 28-24 telephone and data cables. 30-696 Ratchet Telemaster 11212-530 $61.85 All-in-One Telephone & Phone and Data Tools Modular Crimp Tool $47.00 Modular Crimp Tool All-in-One Phone and Data Tool The tool crimps modular plugs for data & voice including handset plugs. Available for Western Electric/Stewart-Stamping or AMP -style connectors. - Embedded cable cutter/stripper. - Crimps 28-24 AWG telephone/data. - Crimping cavities for RJ45, RJ11/RJ12 & RJ22 handset modular plugs - Cuts and strips round UTP/STP phone and data cable along with flat satin phone cable 901014 All-in-One Phone Tool AMP $130.00 901016 All-in-One Phone Tool WE/SS $130.00 1556 All-in-One Phone and Data Tool $38.75 1557 All-in-One Phone and Data Tool AMP $38.75 Twisted Pair Hand Tools This 3-in-1 ratchet-style crimp tool cuts, strips, and crimps modular plugs on either round or flat cables. (Flat silver-satin cable is not recommended for patch cords used to transmit data, yet most tools only offer a flat cable stripper.) The parallel action design maintains accurate alignment of the die with the plug for a precision crimp every time. PT908 Modular Crimp Tool $155.00 Telephone Ratchet Crimper Pro-Crimper II Hand Tool Category 6 Modular plug die set and tool crimps both the strain relief and the modular plug contacts at the same time. - External strain relief clamp die set & tool are for use /8-position category 3, 5, & 5e plugs only. 80 Wire Stripper - Designed for stripping the jacket on Cat 5, 5e cables. - Will not nick inner conduct. Modular Crimp Tool Twisted Pair Crimp Tools 790163-1 Pro-Crimper II Hand Tool How Straighten Twisted Pair Wire $315.00 Datacomtools.com TM Typically used for Modular Plug Connectors. Our Telephone Ratchet Crimper was designed with a compact head to fit into tight spaces and ergonomic handles for operator comfort. Portable Butterfly Hand Tool Butterfly tool for Champ 25 Pair Connectors - Terminates & shears all wires in a single operation. - Wires can be laced in tool or lacing fixture. - Base plate can be bench mounted. 229378-1 Butterfly Hand Tool 230328-3 Optional lacing fixture $1745.00 $137.35 - Combination tool terminates 8, 6, & 4-position modular style plugs. - No need to change crimping dies. - Full-cycle ratchet provides quality terminations every cycle. - Straight action ensures uniform crimp. - Built-in wire cutter and stripper for flat cable. - All-steel frame has rust-resistant, black oxide finish. 45575 Telephone Ratchet Crimper $71.65 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply Pro Installer’s Modular Plug Tool Part Number 1-231666-4 1-231666-3 1-231666-2 1-231666-1 1-231666-0 Network Tool Bundle High 8-Position 6-Position 4- & 64-Position Price Performance 8- Line Die Body Die Position Handset Position Die Set Set Set Line Die Set Die Set • • • • • $378.00 • • • • $360.00 • • • • $315.00 • • • $315.00 • • • $265.00 Modular Plugs sold in boxes. Each box contains 100 Plugs 5-554720-3 RJ45 8 Conductor 26-24 AWG Solid Cable 5-554739-3 RJ45 8 Conductor 26-24 AWG Stranded Cable 5-555042-3 RJ11 6 Conductor 26-24 AWG Solid Cable 5-641337-3 RJ11 6 Conductor 26-24 AWG Stranded Cable Category 6 Modular Plug (100 Per box) 5-1375204-3 Unshielded stranded 24-26AWG 5-1375202-3 Unshielded solid 23-24AWG - Data SureStrip™ Cat5e, Cat6, Phone Cutter/Stripper - All-in-One Data & Phone Tool (WE/SS-style) - 110 Non-Impact Punchdown Tool - RJ45 WE/SS 8P8C Modular Plugs (Cat5e, Cat5) - 10 pack Connector style: - WE/SS-style modular plugs $38.00 $35.00 $20.00 $21.50 $65.00 $72.75 4909 Network Tool Bundle $56.75 Indent D-Sub Crimper Twisted Pair Bundles Crimp Bundle Kit Complete tool bundle along with modular plugs to make RJ45 or RJ11 patch cords. - Universal Cable Stripper - Modular Plug Crimper for RJ45 & RJ11/12 - 10, RJ45 Cat5e plugs for solid, round cable - 10, RJ11 phone plugs for solid, round cable - Universal Cable Stripper - Modular Plug Crimper for RJ45 & RJ11/12 - 110 Punchdown Tool - 10, RJ45 Cat5e data plugs for solid, round cable - 10, RJ11 phone plugs for solid, 70009 Crimp Bundle Kit 70016 $29.45 Indent D-Sub Crimper Crimping tool for 4-indent crimping of closed-barrel D-sub contacts. Networking Tool Bundle Complete tool bundle for making patch cords or terminating 110 jacks & panels. Networking Tool Bundle - Comfortable handles for low-effort operation - Adjustable pin height locator 1460 4-Indent D-Sub Crimper (26-20 AWG) $31.99 $32.50 Terminal Crimpers HTN 21L Terminal Crimper 1600 Series Crimper Insulated Terminals Crimps 22-14 AWG (.34-2.5 mm²) insulated terminals and lugs. Fixed die system. - Fixed steel die system. - Built-in terminal locator. - Durable steel construction for long life. - Handles designed for loweffort operation. Crimp size: 16-14(Blue)/22-18(Red) Connector style: Terminal-Elliptical 2-level standard commercial terminals Connector type: Insulated & non-insulated terminals & lugs Crimp Size: 20-18/16-14/12-10 Connector Type: Non-insulated terminal lugs, cable lugs, parallel and serial splices 1605 1600 Series Crimper 901461 HTN 21L Terminal Crimper $116.59 $143.15 1600 Series Wire Ferrule Crimper Professional-quality crimping tool for insulated and non-insulated wire ferrules. - Ferrules’ crimp conforms to DIN 46228 Pt. 1 and 4. Type: 20-10 AWG (.5-6 mm²) stranded wire Crimp Size: 20-10 Trapezoid Connector Style: DIN or US type wire ferrules Connector Type: Insulated & non-insulated wire ferrules 1647 1600 Series Professional Wire Ferrule Crimper $134.40 CTN 25 D5 Terminal Crimper Crimping tool for non-insulated terminal lugs w/a wire range of 8-4 AWG. CTI 6 Terminal Crimper 1600 Series Crimper Non-Insulated Terminals Type: AWG 20-10 (0.1-6.0 mm²) Crimp Size: 20-16(R)/16-14(B)/12-10(Y) Connector Type: Insulated terminal lugs, cable lugs & serial splices. Type: 20-10 AWG (.5-6.0 mm²) Crimp size: 12-10/16-14/20-18 Terminal, indent Connector style: Standard commercial non-insulated terminals & lugs. 900612 CTI 6 Terminal Crimper 1618 1600 Series Crimper Non-Insulated $170.79 $161.95 Scotchlok Terminal Box Terminal Crimp Kit The STK-1 is constructed of durable metal with individual product compartments. While the compartments keep you organized, the metal frame protects the contents. Scotchlok Terminal Box $179.99 900623 500-037 Terminal Crimp Kit Major Credit Cards Accepted - Fixed die system - Crimps rolled and brazed lugs (900622) - Crimps pin-type lugs (900622) - Crimps parallel and serial splices (900622) - Crimps tube lugs and splices (900623) - Conforms to DIN CTN 25 D5 Terminal Crimper $595.00 Terminal Crimper Kit - Ratcheted crimper - Ring insulated terminal 22-16 AWG x 50 pcs - Ring insulated terminal 16-14 AWG x 40 pcs - Ring insulated terminal 12-10 AWG x 20 pcs Economical terminal crimper kit for electrical and control panel installation and wiring. - 1300 Series Insulated Terminal Crimper - Assorted AWG 22-12 Insulated Terminals - Crimp Tool Features Interchangeable Die System - One-year warranty on kit - Individual Warranties Apply to Each Tool - 3M™ Scotchlok™ Crimping Tool TH-440 - Butt splice insulated 22-16 AWG x 30 pcs - 3M™ ScotchCode™ Tape Dispenser STD-0-9 - Butt splice insulated 16-14 AWG x 20 pcs - 100 x 3M™ Cable Ties 06225 - Butt splice insulated 12-10 x 15 pcs - 100 x 3M™ Cable Ties 06226 - 50 x 3M™ Highland™ Ring Tongue Terminal RV18-6* - Plus more. Go to datacomtools.com for full listing STK-1 Connector type: Noninsulated terminal lugs (900622), Tube lugs and splices (900623) $33.85 4305 Terminal Crimper Kit 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $73.85 81 CrimpALL Broadcast Pack SealTite® Pro for the Smart Home A/V Kit - CrimpALL/8000 Crimper Frame Only - RG6, RG6 Quad Die, CrimpALL/8000 & 1300 Series - HDTV Die CrimpALL/8000 & 1300 Series - HDTV Die for CrimpALL/8000 & 1300 Series - SMA, BNC/TNC Die for CrimpALL/8000 & 1300 - RG8/11/213-CrimpALL/8000 & 1300 Series 4802 CrimpALL Broadcast Pack $138.00 SealTite™ Waterproof Connector Kit Kit Contains: - SmartHome Data SureStrip® 1119 - SealTite® Pro Compression Crimper, RCA, BNC, Cable TV F (RG59/6/6 Quad) 1555 - 6 RG6/6 Quad connectors (2): RCA, BNC, CATV “F” - 2 sets of color bands (for use on BNC & RCA) 4915 This kit is designed for applications requiring weatherproof CATV “F” connections including satellite dish and CATV installations. The crimper works with Paladin’s connectors as well as Augat/T&B Snap-n-Seal™. - KT 8 Cutter - LC CST CATV - SealTite™ 59/6 CATV “F” - Cable TC “F” flaring & attachment tool SealTite® Pro Kit $98.60 4906 SealTite™ Waterproof Connector Kit $80.95 Crimpers and Die Sets 1300 Series Crimp Frame Only Paladin’s 1300 Series is the original interchangeable-die crimping system - all the rest are mere copies of its innovation. It continues to be the answer for precision-crimping at an affordable price with over 50 die sets available for the most popular connectors. See the chart for specific crimp dimensions. 1302 1300 Series Crimp Frame Only 1300 Series Die Sets Part # Description Tool & Die: 1307 RJ-45 - 8P8C (8 Pin) Die only: 2061 Tool & Die: 1340 RJ11 & RJ12 - 6P6C, 6P4C, 6P2C Die only: 2062 Tool & Die: 1341 RJ22, Handset 4P4C Die only: 2063 (4 Pin) Tool & Die: 1342 RJ45 - 8P8C (8 Pin) Die only: 2064 Tool & Die: 1343 RJ11 & RJ12 - 6P6C, Die only: 2065 6P4C, 6P2C Tool & Die: 1344 RJ11 DEC-MMJ OFFSET (6P6C) Die only: 2067 Tool & Die: 1345 RJ50-10P10C (10 Pin) Die only: 2068 Tool & Die: 1361 British Telecom 6 Pole Die only: 2032 Plug Tool & Die: 1370 SHIELDED RJ45, Stewart Die only: 2670 Connector, Short Body Tool & Die: 1371 SHIELDED RJ45, Hirose Die only: 2671 Connectors, Long Body Tool & Die: 1372 SHIELDED RJ45, Hirose Die only: 2672 Connectors, Short Body Tool & Die: 1373 SHIELDED RJ45, Molex Die only: 2673 Connectors Tool & Die: 1374 SHIELDED RJ45, AMP/ Die only: 2674 Molex Connectors Tool & Die: 1387 RJ45 WE/SS & RG6/ Die only: 2687 RG6 Quad CATV “F” $42.99 Crimp Style Flat/Round, Solid/Stranded/ RJ45 Unkeyed WE & SS Flat/Round, Solid/Stranded/ RJ11/RJ12 Unkeyed WE & SS Flat/Round, Solid/Stranded/4 Pin Handset WE and SS Flat/Round, Solid/Stranded/4 Pin Handset WE and SS Flat/Round, Solid/Stranded/ RJ11/RJ12 Unkeyed AMP Flat/Round, Solid/Stranded/ RJ11 DEC-MMJ OFFSET Flat/Round, Solid/Stranded/ RJ50 Unkeyed WE and SS Flat/Round, Solid/Stranded/ BT 6 Pole Round, Shielded, RJ45 STP Stewart Connector, Short Body Round, Shielded, RJ45 STP Hirose Connectors, Long Body Round, Shielded, RJ45 STP Hirose Connectors, Short Body 5.0mm Dia. Round, Shielded RJ45 STP Molex Connectors 6.0mm Dia. Round, Shielded (STP), RJ45 STP AMP & Molex UTP 4-pair & RG6/RG6 Quad RJ45 WE/SS 8-pin & .360” HEX/.324” HEX Manufactures Western Electric Stewart Connector Western Electric/ Stewart Connector Western Electric/ Stewart Connector AMP (Tyco) Inc. Connectors only AMP (Tyco) Inc. Connectors only AMP (Tyco) Inc. Connectors only Virginia Plastics Price $58.99 $25.99 $58.99 $25.99 $58.99 $25.99 $58.99 $25.99 $58.99 $25.99 $58.99 $25.99 $58.99 $25.99 British Telecom $58.99 $25.99 Plugs only Stewart Connector $58.99 $25.99 Hirose $58.99 $25.99 Hirose $58.99 $25.99 Molex $58.99 $25.99 AMP (Tyco) Inc. & $58.99 $25.99 Molex Standard RJ45 $60.99 WE/SS Mod. Plugs $31.99 & RG6/RG6 QS Hex-Crimp CATV F 8000 CrimpALL® Tool Frame The 8000 Series CrimpALL® was designed with user satisfaction in mind. This tool is designed for superior comfort and ease of use. It uses the same die sets as our 1300 Series crimpers. 8000 8000 CrimpAll® Tool Frame 8000 Series Die Sets Part # Description Tool & Die: 8030 RJ45 - 8P8C (8 Pin) Die only: 2061 Tool & Die: 8031 RJ & RJ12 - 6P6C, 6P4C, 6P2C Die only: 2062 Tool & Die: 8032 RJ22, Handset 4P4C Die only: 2063 (4 Pin) Tool & Die: 8033 RJ45 - 8P8C (8 Pin) Die only: 2064 Tool & Die: 8034 RJ11 & RJ12 - 6P6C, Die only: 2065 6P4C, 6P2C Tool & Die: 8035 RJ11 DEC-MMJ OFFSET (6P6C) Die only: 2067 Tool & Die: 8036 RJ50 - 10P10C (10 Pin) Die only: 2068 Tool & Die: 8038 British Telecom 6 Pole Die only: 2032 Plug Tool & Die: 8040 Shielded RJ45, Stewart Die only: 2670 Connector, Short Body Tool & Die: 8041 Shielded RJ45, Hirose Die only: 2671 Connectors. Long Body Tool & Die: 8042 Shielded RJ45, Hirose Die only: 2672 Connectors, Short Body Tool & Die: 8043 Shielded RJ45, Molex Die only: 2673 Connectors, 5 dia. cable Crimp Style Flat/Round, Solid/Stranded/ RJ45 Unkeyed WE and SS Flat/Round, Solid/Stranded/ RJ11/RJ12 Unkeyed WE & SS Flat/Round, Solid/Stranded/ 4 Pin Handset WE & SS Flat/Round, Solid/Stranded/ RJ45 Unkeyed AMP Flat/Round, Solid/Stranded/ RJ11/RJ12 Unkeyed AMP Flat/Round, Solid/Stranded/ RJ11 DEC-MMJ OFFSET Flat/Round, Solid/Stranded/ RJ50 Unkeyed WE and SS Flat/Round, Solid/Stranded/ BT 6 Pole Round, Shielded, RJ45 STP Stewart Connector, Short Body Round, Shielded, RJ45 STP Hirose Connectors, Long Body Round, Shielded, RJ45 STP Hirose Connectors, Short Body 5.0mm dia. Round, Shielded, RJ45 STP Molex connectors, 5.0mm dia cable Tool & Die: 8044 SHIELDED RJ45, 6.0mm dia. Round, Shielded, Die only: 2674 AMP/Molex Connectors, RJ45 STP AMP & Molex, 6 dia cable 6.0mm dia cable Tool & Die: 8045 RJ45 WE/SS & RG6/ UTP 4-pair & RG6/RG6 Quad Die only: 2687 RG6 Quad CATV “F” Coax RJ45 WE/SS 8-pin & .360” HEX/.324” HEX $58.99 Manufactures Western Electric Stewart Connector Western Electric Stewart Connector Western Electric Stewart Connector AMP (Tyco) Inc. Connectors only AMP (Tyco) Inc. Connectors only AMP (Tyco) Inc. Connectors only Virginia Plastics Price $75.99 $25.99 $75.99 $25.99 $75.99 $25.99 $75.99 $25.99 $75.99 $25.99 $75.99 $25.99 $75.99 $25.99 British Telecom $75.99 $25.99 Plugs only Stewart Connector $75.99 $25.99 Hirose $75.99 $25.99 Hirose $75.99 $25.99 Molex $75.99 $25.99 AMP (Tyco) Inc. & $75.99 $25.99 Molex For Standard $75.99 $31.99 RJ45 WE/SS Modular Plugs & RG6/RG6 QS HEXcrimp CATV “F” Crimpers and Die Sets Crimpmaster Crimp Tool Frame High quality ratchet-type crimp tool for electricians, contractors and installers who require guaranteed repeatability of good mechanical and electrical connections. 1600 Series Crimp Frame Only The 1600 Series is Paladin Tools’ premium crimper family designed for the professional that demands superior quality and reliability. It is the most widely used tool amongst broadcast installers and professional cable assembly companies. It supports more fiber applications than the larger, more expensive tools. 1600 1600 Series Crimp Frame Only $66.59 1600 Series Die Sets Part # Description Coaxial Tool & Die: 1617 BNC/TNC - RG58/59/ 62AU, Belden 8281 Die only: 2005 Tool & Die: 1609 BNC/TNC - Belden 8281 & 7505 Die only: 2660 Tool & Die: 1669 BNC/TNC - Belden 1855, Die only: 2683 1505, & 1694 Fiber Tool & Die: 1614 SMA, SMB, FC Biconic, SC, ST Die only: 2664 Tool & Die: 1668 SC & ST Die only: 2668 82 Datacomtools.com Crimp Style Comments Price .256/.213/.068” HEX 6.5/5.4/1.7mm .324/.068” HEX & .42” SQ: 8.2/1.7mm HEX & 1.0mm SQ .278/.255/.178/.041” HEX Common 2- & 3 Piece BNCs Kings, ADC, Switchcraft, Amphenol HDTV Universal die for all HDTV $110.59 $45.99 $110.59 $45.99 $110.59 $45.99 - $96.65 $45.99 $96.65 $45.99 .213/.178/ .151” HEX 5.41/4.52/ 3.83 mm .120/.137/.190” RND 3.05/3.48/4.83mm TM 3M, Suncall, Fiber Source 30-506 CrimpMaster™ Crimp Tool Frame Die Sets for the Crimpmaster™ Crimp Tool Frame 30-560 RJ-45 AMP, for Crimpmaster™ 30-556 RJ-11, for Crimpmaster™ 30-594 Insulated Slide-On Connectors, for Crimpmaster™ 30-586 Commercial Open Barrel, for Crimpmaster™ 30-573 Cambridge Type RG-59, for Crimpmaster™ 30-577 RG-8, N-Series/BNC, for Crimpmaster™ 30-578 RG-59, RG-6, 8281/Quad, for Crimpmaster™ 30-587 RG-58, RG-174, RG-8218, for Crimpmaster™ 30-576 RG-174, Mini-59 BNC/TNC, for Crimpmaster™ 30-591 Plenum/Non-Plenum, RG-58 & RG-59, for Crimpmaster™ 30-572 Mini Insulated Ring, Spade & Butt Splices, for Crimpmaster™ 30-579 Insulated Terminals, for Crimpmaster™ 30-580 Non-Insulated Terminals, for Crimpmaster™ 30-581 Combo RG-58, RG-59/62, BNC/TNC, for Crimpmaster™ 30-582 F-Type CATV, RG-59, RG-6, for Crimpmaster™ $52.95 $52.35 $52.35 $32.40 $32.40 $32.40 $32.40 $32.40 $32.40 $32.40 $32.40 $37.40 $32.40 $32.40 $32.40 $32.40 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply F-Connectors BNC & RCA Connectors - Approved for use by most cable TV & satellite companies. - RF signal contains strong signal. - Connections do not come loose. - Provides superior durability in all climates compared to other manufactures’ connectors. 89-211 92-610 92-650 92-656 92-660 RG-11, Dual Shield, Compression Connectors, 10 Pack RG-59 Compression F-Connectors - Jar of 50 RG-6 Compression F-Connectors - Jar of 50 RG-6 Compression F-Connectors - Jar of 100 RG-6 Plenum Compression F-Connectors - Jar of 50 $47.25 $31.50 $30.90 $56.00 $45.25 Waterproof CATV “F” compression connectors for digital cable, satellite, and cable modems. Works with HDTV! - Quick & Easy assembly - Compression-type for indoor or outdoors - Works with HDTV & digital cable - For satellite, CATV, cable modems, video, & UHF 9645 9646 9647 Sealtite F Connectors RG59 - Jar of 50 Sealtite F Connectors RG6 - Jar of 50 Sealtite F Connectors RG6 Quad - Jar of 50 $29.99 $29.99 $29.99 Compression Kits BNC RCA - Constructed of nickel plated brass & gold plated head. - Easily installs onto RG6 & RG59 cable. - HDPE adapter sleeve & inner “O” ring provide double protection. - Compatible with 30-603 & 30-793 OmniSeal Compression tools. 89-047 89-5047 89-048 89-5048 89-572 89-570 89-582 89-580 BNC RG-59 Compression Connectors - 15 pack BNC RG-59 Compression Connectors - Jar of 35 BNC RG-6 Compression Connectors - 15 pack BNC RG-6 Compression Connectors - Jar of 35 RG59 RCA Compression Connectors - Pack of 10 RG59 RCA Compression Connectors - Jar of 35 RG6 RCA Compression Connectors - Pack of 10 RG6 RCA Compression Connectors - Jar of 35 $30.45 $65.25 $30.45 $65.25 $20.05 $61.25 $20.05 $61.25 Compression Tools SealTite Pro Kit Includes all the tools you need to prepare the cable and terminate any compression connector using RG59, RG6 or RG6 Quad shield cables. - KT 8 Cutter - LC CST CATV Stripper - RG6 CATV Flaring Tool - SealTite Pro Crimper - SealTite RG6/Quad (10) Connectors Compression Tool, F-Connector - Compresses Series 6 & 59 coax compression connectors. - Connection never comes loose. - Adjustable nesting fixture accommodates a variety of connectors. 30-633 4910 Paladin Tool SealTite Pro Kit Basic Compression Kit - Economy Compression Tool - Data T-Cutter - Coax Stripper - RG59 connectors: 10 $103.10 - RG6 Quad connectors: 10 - RG6 connectors: 10 33-620 Basic Compression Kit Service Compression Kit - RG6 universal connectors: 50 - RG6 universal plenum connectors: 10 - RG59 BNC connectors: 10 - RG6 BNC connectors: 10 $85.00 - OmniSeal Compression tool - Port Seal - Data T-Cutter - RG6 Stripmaster - RG6 Quad blade 33-630 Service Compression Kit $318.00 Coax Flaring Tools $24.05 OmniSeal™ Pro Compression Tool - Connects RG6, RG Quad Shield, RG59, (33-793 also works on BNC) & compression F-Type coaxial cables. - Fast & reliable solution to home theatre, CATV, satellite & security applications. - Works with most compression connectors. 30-603 30-793 $65.40 $79.99 SealTite Pro Crimper Crimps linear “F”, BNC, RCA, & compression connectors for RG59, RG62AU, RG6 & Quad cables. 1555 $58.95 BNC/F-Connector Tool - Flare the shield braid back from the dielectric without nicking your finger. - Attachment tool enables you to hold the connector comfortably to insert onto cable. - One year warranty. 1927 Cable TV “F” Flaring & Attachment Tool $8.75 RG59/RG6/RG6 Quad Flaring Tool Major Credit Cards Accepted 1908 1907 1916 CATV “F” Extraction Tool 8” BNC Extraction Tool 8” BNC Extraction Tool 12” $13.99 $13.99 $13.99 - Combines a 7/16 in. hex Socket & 3/8-32 threaded end. - Holds F-connector during insertion to ease seating against dielectric. - Works on RG59 and RG6/6 Quad Cable. - Flares shield away from center dielectric. - Saves time on CATV and satellite installations. - One year warranty. 1917 - Comfortable driver-style plastic handle. - One-year warranty. - 1908 - Use the hex socket to easily remove & insert connectors. $24.15 35-046 F-Connector Tool 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $24.95 83 Wire Strippers 45-315 45-715, 45-716 Super T-5 Wire Stripper - Wire Range #8 to #16 AWG - All of the T®-Stripper Features Plus: 6-32 and 8-32 Self Chasing Screw-Cutting Holes - Curved, cushion-grip handles for ergonomic comfort. - Locking latch to keep stripper in closed position. 45-315 45-715 45-716 45-718 45-915 45-918 45-718 - 10-18 AWG Solid (45-715) - 16-26 AWG Stranded (45-716) - Pocket-Locket locks tighter when tool is slipped into holster for added safety. - Narrow plier nose is perfect for holding and twisting wires Kinetic Super Stripper - Thumb guide promotes comfort while focusing kinetic energy for faster wire stripping. - Pocket-Locket™ locks when tool is slipped into holster or pant pocket. 45-915, 45-918 Kinetic™ Reflex™ Super T®-Stripper - Non-slip Santoprene™ textured grips. - New ergonomic design for maximum control. - Strips 10-18 solid and 12-20 stranded. - Shear-Cut™ bolt cutters. Super T-5 Wire Stripper Kinetic Super Wire Stripper 10-18 AWG Solid Kinetic Super Wire Stripper 16-26 AWG Stranded Kinetic Super Wire Stripper 8-16 AWG Stranded Kinetic™ Reflex™ Super T®-Stripper (10-18 Solid & 12-20 Stranded) Kinetic™ Reflex™ Super T®-Stripper (6-14 Solid & 8-16 Stranded) $13.99 $23.35 $23.35 $23.35 $24.52 $24.52 45-415, 45-615, 45-418, 45-621, 45-423 Reflex T-Stripper - One-step stripping of outer jacket of NM cable - no slitting required. - Versatility to strip, cut, and loop conductor wires with precision. 45-415 45-416 45-417 45-418 45-423 45-621 45-615 45-092 45-292 45-262 45-092, 45-262, 45-292 Stripmaster Wire Stripper - Knife-type blades - Wire gripper holds wire centered in stripping hole. - Eliminates nicking, cutting, and fraying of commercial wire. - Special POP packaging. Reflex Premium T-5 Stripper 10-18AWG Solid Reflex™ Premium T-6 Stripper (#16-#26 Stranded) Reflex™ Premium T-7 Stripper (#22-#30 Solid) Reflex™ Premium T-8 Stripper (#8-#16 Stranded) Reflex™ Premium Cutter (1/2” Solid, #10 Stranded) Dual NM Reflex™ Super T-Stripper Reflex Super Wire Stripper 8-16 AWG Solid Stripmaster Wire Stripper #10 to #22 AWG (Box) Stripmaster Wire Stripper 10-22 AWG (Blister Card) Coaxial Stripmaster, RG-6 $16.75 $16.75 $15.75 $18.65 $18.65 $23.85 $18.65 $36.65 $37.25 $38.65 Wire Strippers 45-120, 45-121, 45-125, 45-124 T-Stripper Wire Strippers - Form-ground, knife-type blades for easy stripping. - Built-in wire cutter and looping holes. - Convenient plier nose for extra gripping strength. 45-120 45-121 45-125 45-124 45-248 45-249 45-101 45-777 45-248, 45-249 45-101 45-777 45-074 NM Cable T-Stripper - Easy, one-step stripping of outer jacket of NM cable - no slitting required. - Versatility to strip, cut, and loop conductor wires. - Strips 12 or 14 AWG solid. V-Notch Stripper Seven-In-One Stripper - Cuts copper or aluminum - Strips 8-16AWG solid and wire, solid, or stranded. 10-18AWG stranded wire. - Rotating cam wheel - Cuts unhardened wire, adjusts to strip 10-24 bolts and screws (4-40, AWG wire. 6-32, 8-32, 10-24 and - Holes for solid wire. 10-32) & reform threads. T®-5 T®-Stripper (10-18 AWG Solid) T®-6 T®-Stripper (16-26 AWG Stranded) T®-7 T®-Stripper (22-30 AWG Solid) T®-8 T®-Stripper (8-16 AWG Stranded) 14/2 NM Cable T®-Stripper 12/2 NM Cable T®-Stripper V-Notch Stripper Seven-In-One Stripper $11.45 $11.45 $13.30 $12.80 $15.95 $15.95 $8.60 $21.30 30-428 Data T®-Cutter Combo Tool - Cuts round communication cable and - Convenient, four-function tool features maintains cable geometry for better precision-ground stripping holes and cable performance. knife-to-anvil cutting blades. - Cuts multi-pair cable up to .5” and - Crimps bare and insulated terminals. coax cables up to RG-9/U. - Strips 8 to 20 AWG solid and 10 to 22 - Suitable for soft cables (not ACSR) AWG stranded wire. - Cuts unhardened bolts (4-40, 6-32, 8-32, 10-24, and 10-32) and reforms threads. 45-074 Data T®-Cutter 30-428 Combo Tool $17.15 $30.00 Wire Strippers 45-248 45-778 NM Cable Dual-Hole T®Stripper - Stripping holes for stripping two 12 AWG or two 14 AWG wires simultaneously. - Ability to strip both conductor wires of NM cable at a time. 45-248 45-778 45-123 45-128 45-129 84 45-123 Multi-Crimp Strip Tool - Cuts wire. - Crimps insulated and non-insulated wires. - Cuts bolts. - Strips 10-22 AWG wire. T®-Cutter Wire Cutters - Hardened steel, sheertype blades. - Up to 1/2” in O.D. fine-stranded wire and 10 AWG solid wire. Premium T®-14 T®-Stripper (12 or 14 AWG Solid) Multi-Crimp Strip Tool T-®Cutter Wire Cutter Swivel-Blade® Cable Stripper (1/4” to 3/4” in O.D.) Swivel-Blade® Cable Stripper (3/4” to 1 1/2” in O.D.) Datacomtools.com TM 45-128, 45-129 Swivel-Blade® Cable Strippers - For end/center stripping of coax & power cables from .75”-1.5” in O.D. - Strips insulation to 5/32”. - Spare blade in handle. $15.95 $14.65 $12.80 $31.85 $40.05 1950, 1951 Pro Wire Strippers - Stripping stations with a positive stop provide precise stripping diameters. - Long curved cutter blades reduce force required by 25% and can cut NM in a single cut. - Lock tab protects cutting edges during storage. 1950 1951 1916 1917 1918 1916, 1917, 1918 Terminator Wire Strippers - Precision-ground blades ensure consistent stripping. - Heat treated for long life. - Rust-resistant black oxide finish. Pro Wire Stripper 10-18 AWG Pro Wire Stripper 22-32 AWG Terminator Wire Stripper 20-10 AWG Solid Wire Terminator Wire Stripper 26-16 AWG Stranded Wire Terminator Wire Stripper 30-22 AWG Solid Wire $17.45 $17.45 $13.99 $24.15 $14.55 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply Wire Strippers JIC-1022, JIC-1626, JIC-2030 JIC-375 JIC-175 Wire Stripper and Cutter Fiber Optic Stripper Three Ergonomic Fiber Optic The JIC-1022 Wire Stripper and Hole Stripper Cutter is designed to strip/cut - Strips the 2-3 mm fiber - Used for stripping the the most commonly used jacket down to the 900 250 micron coating from stranded and solid wire gauges micron buffer coating. the 125 micron fiber. 10 to 22 AWG and 1.6-3mm - The second hole strips the - Preset at the factory fiber jackets. The JIC-1626 is 900 micron buffer coating so no adjustments are designed for 16 to 26 AWG down to 250 micron. necessary. wire. The JIC-2030 is designed - The third hole strips the - Yellow plastic formed for 20-30 AWG wire. 250 micron cable to fiber handles, tool is 6” long. w/o nicks or scratches. JIC-1022 JIC-1626 JIC-2030 JIC-375 JIC-175 JIC-125 JIC-125 ST-500, ST-550, ST-450 OK-3907-2224, OK-3907-2226 Fiber Optic Stripper The Fiber Optic Stripper is used for stripping 250 micron buffer coating from 125 micron optical fiber. Adjustable Precision Wire Strippers These Precision Wire Strippers feature an adjustment dial that allows the operator to select one of six different settings. Adjustable Precision Wire Strippers The OK-3907 Series wire strippers from OK Industries is the industry’s leading cut-and-strip tool for copper interconnect applications. - Design prevents nicks or scratches on the optical fiber. A calibrated wire stop can then be adjusted for the desired insulation strip length. In a single motion, the operator squeezes and pulls the tool. Installers and telecom technicians enjoy its construction and comfortable rubber grips, which allows time savings through the cutting of multiple wires. Wire Stripper and Cutter Wire Stripper and Cutter (16-26 AWG) Wire Stripper and Cutter (20-30 AWG) Fiber Optic Stripper Three Hole Ergonomic Fiber Optic Stripper Fiber Optic Stripper $7.99 $7.99 $7.99 $21.15 $22.10 $18.50 ST-500 ST-550 ST-450 OK-3907-2224 OK-3907-2426 Adjustable Precision Strippers (20-30 AWG) Adjustable Precision Strippers (18-28 AWG) Adjustable Precision Strippers (26-36 AWG) Adjustable Precision Strippers (22-24 AWG) Adjustable Precision Strippers (24-26 AWG) $39.49 $39.49 $38.95 $45.00 $45.00 Wire Strippers 1255 1257 3240 45-514 JIC-4473 JIC-4366 LC CST-58/59 2- & 3-level adjustable stripper for RG58, RG59, RG62AU & RG6 coaxial cable. LC CST CATV 2-level stripper for RG59, RG6 & RG6 Quad coax cables. Pre-set for RG6 CATV “F” connectors. CST Vario Stripper Adjustable-blade coaxial cable stripper for cable diameters of 0.1 - 0.315” (2.5 - 8.0 mm) including RG58, RG59, RG62 & Belden 1505A. Strips outer jacket, shield braid, and inner insulation down to center conductor. Cyclops® Data Cable Stripper Fast, Easy removal of outer sheath insulation. PVC and Plenum types from all Unshielded twisted pair (UTP), Shielded Twisted Pair (STP) and multicore steel and designed to fit comfortably in your hand. Wire Stripper & Cutter The latest development in wire stripping & cutting. Simply place the wire in the stripping slot. Squeeze and pull. Cable Sheath Stripper & Ring Tool The Cable Sheath Stripper and Ring Tool is good for copper cables as well as tight buffer optical fiber cables. - The wire is stripped and cut to the exact length required. - interchangeable blades 22-24 AWG and 24-26 AWG. - A larger “V” opening on the pliers and no tools required for adjustments. Used for butting and stripping cables too large for hand held pliers. Use 1 blade to butt PVC sheathing and use the second blade to strip the sheathing. Adjustable for .018” or .031” thick plastic, rubber or fabric insulation. Pre-set Strip Lengths: .315” outer jacket, .157” inner dielectric. 1255 1257 3240 45-514 Pre-set Strip Lengths: Outer Jacket = .236”. LC CST-58/59 LC CST CATV CST Vario Stripper Cyclops® Data Cable Stripper $19.15 $15.25 $140.00 $51.55 JIC-4473 Wire Stripper & Cutter JIC-4366 Cable Sheath Stripper & Ring Tool $47.85 $43.50 Wire Strippers 1117 1161 1163 1113 1115P 1119 GripP-Stripper Our newest wire strippers combine ergonomics and versatility! Strip 22-10 AWG wire and cable for the most common types: electrical wire, hook-up wire & multi-conductor cable. Also cuts flat cables. Adjustable Jacket Stripper Perfect tool for cutting jackets from a variety of fiber optic cable. FiverOptic 5-in-1 Stripper Multi-functional fiber optic stripper removes outer jacket, buffer only or buffer and acrylate from 2.0-3.0 mm cable. Stripax® Pro 6 Stripper/ Cutter (28-10 AWG) The new stripax® Pro 6 and Pro 16 perform powerful stripping of standard and industrial insulations for a wire range of 28-10 AWG and 10-6 AWG. Mini-stripax® plus Stripper/Cutter Universal wire stripper and cutter that uses changeable blades to strip PVC and Teflon® insulation. Strips PVCinsulated wire in the range of 28-18 AWG and Teflon-insulated wire in the range of 32-18 AWG. Combo UTP/Coax SureStrip® Cutter/Stripper Professional all-in-one cutter & stripper for both twisted pair & coaxial cables! 1117 1161 1171 1113 - Adjust blades with a screwdriver for various size cables. GripP 10 Wire Stripper/Cutter (24-10 AWG) Adjustable Jacket Stripper FiverOptic™ 5-in-1 Stripper Stripax® Pro 6 Stripper/Cutter (28-10 AWG) Major Credit Cards Accepted $13.90 $6.10 $47.98 $89.99 1115P 1119 - Cuts UTP/STP and coaxial cables. - Strips Cat6, Cat5e, Cat5. - Strips RG6, RG6 Quad & RG59. coax cables for 2-level cable TV “F” connectors. Mini-stripax® plus Stripper/Cutter Combo UTP/Coax SureStrip® Cutter/Stripper 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $96.99 $27.25 85 Wire Strippers CPT-WEB CPT CPT-RGTP 11231-255 11230-002 44210-013 Wire Stripper The CPT-WEB is designed to easily strip the outer cable jacket, flatten, and separate the webbed conductors of Siemon’s category 5 cross-connect jumper wire and other UTP cable with webbed conductor pairs. Wire Stripper The CPT provides a simple method to remove the outer cable jacket. CPT is recommended for use with round cable with an exterior diameter from 2.54-6.35mm and an outer jacket thickness from 0.380-0.635mm. Cable Preparation Tool AllPrep Cable Preparation Tool prepares both coaxial and twisted pair cable for termination. The coax die strips RG59 and RG6 coax cable and the twisted-pair die strips UTP, ScTP and fiber cables. Coax Stripper The Coax Stripper has a built-in Allen wrench for adjusting the blade to prevent damage to the cable. The Stripper is economical for 2-level and 3-level stripping for RG58/RG59 and 62AU coax cable. UTP/STP Cable Stripper Economical, calibratable, tough tool cutter. Adjustable blade depth prevents damage to shield and conductors. “Scores” cable to prevent knicking wire when stripping. A length gauge for repeated cutting/stripping ensure accuracy. Cuts Round cable up to 12 AWG. Wire Stripper This stripper assure quick, effortless stripping of wire/cable insulation without nicking or scratching the conductor. Each stripper is made of durable stainless steel and designed to fit comfortably in your hand CPT-WEB CPT CPT-RGTP 11231-255 Wire Stripper Wire Stripper Cable Preparation Tool Coax Stripper $7.50 $6.25 $39.00 $21.00 Wire Slitters UTP/STP Cable Stripper Wire Stripper 11230-002 44210-013 $26.00 $49.00 Scissors 1820, 1821 1822 CST-1900 ES-1964 925CS-ERGO 44300-000 AM25 & AM35 Slitters Get the original tool designed for slitting cable insulation! Strip & slits around cables with PVC, Teflon & THHM Insulations. AM 25 for cables less than 1” & AM 35 for cable sizes 1.0 - 1.4”. Universal Slitter Slits and strips round cables with a diameter of 0.18” to 1.40”. Quickly removes insulation without nicking conductor. For power and telecommunication cable 500-1200 MCM. Not suitable for XLP insulation. Round Cable Stripper The CST-1900 is designed for fast and precise jacket removal of PVC, rubber, PE and other jacket materials, and works well on round cables with diameters ranging from 3/16” to 1-1/8”. Electrician Scissors Made of high carbon steel with a special hardening process for greater durability and nickel plated for that professional look.The Scissors are notched to strip 19 and 23 AWG wire and one blade is serrated. Ergonomic Scissors/Snips The Model No. 925CS-ERGO features one blade with an ergonomically shaped cushioned palm rest. The other blade has the traditional ring bow. Other features include one serrated blade to prevent wire from sliding during cutting, stripping notches for 19 ga. and 23 ga. wire. Electrician’s D-Snips The Electrician’s D-Snips features all of the capabilities of the Electrician’s Snips with a special ergonomic handle that minimizes hand fatigue by enabling you to make cuts with less effort. The D-Snips makes faster, cleaner, and safer cuts. 1820 1821 1822 CST-1900 AM25 Slitter AM35 Slitter Universal Slitter Round Cable Stripper $46.75 $54.25 $24.45 $47.90 ES-1964 925CS-ERGO 44300-000 Electrician Scissors Ergonomic Scissors/Snips Electrician’s D-Snips $9.99 $18.00 $23.00 Hand Wire Wrapping/Unwrapping Tools Wire Wrapping/Unwrapping Tool This two sided wire wrapping and unwrapping tool is intended to be two tools in one. It is designed to produce perfect wire wrapping connections. To switch from wire wrapping to unwrapping takes only seconds. Just a quick change of the cap from one end to the other. HW-UW-224 Wire Wrapping/Unwrapping Tool (22-24 AWG) $69.85 Sleeved Unwrapping Tool This versatile unwrapping tool with a funnelshaped spring loaded sleeve. This is a single ended insulated tool with a yellow plastic handle used for 20-26 AWG. 5 1/2” long. UD-2224 Hand Wrap & Unwrap Tool These wire wrapping tools do the job of two. These two sided tools allow for quick change of wrapping to unwrapping and back, while the unused side serves as a handle. 6” long. WDUD-2000 WDUD-2224 WDUD-2600 WDUD-3000 Hand Wrap & Unwrap Tool (20 AWG) Hand Wrap & Unwrap Tool (22-24 AWG) Hand Wrap & Unwrap Tool (26 AWG) Hand Wrap & Unwrap Tool (30 AWG) $64.00 $64.00 $75.50 $75.50 86 Datacomtools.com TM $64.00 $22.70 Hand Wire Unwrapping Tool This wire unwrapping tool is used to remove wire connections made with 20 thru 26 gauge wire. UW4 Unwrapping Tool 20-26 AWG $30.00 Hand Wrap Tool This manual wire wrapping tool allows you to make uniform, gas-tight solderless wrapped connections with 22 and 24 gauge wire. Red handle. 5” long. DSL Insulated Wrap and Unwrap Tool Specifically designed for DSL connections. The wrapping side is designed for 24-26 AWG wire, and the unwrap side is designed for 20-26 AWG wire. Comes with an insulated handle for dielectric protection. WDUD-26DS DSL Insulated Wrap and Unwrap Tool Sleeved Unwrapping Tool JIC-22681 Hand Wrap Tool $16.45 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply Wire Wrapping Kits Insulated Wire Wrapping Kit This is a Wire Wrapping complete tool kit for technicians working at a Main Distributing Frame where wire wrapping is required. 5-Piece Wire Wrapping Tool Telecom wire wrapping kit used by technicians working at a main distribution frame Includes: - Wire wrapping bit 22-24 AWG - Wire Wrapping Sleeve - Long Nose Pliers Includes: - Wire Stripper & Cutter - 3” Long Wire Wrapping Bit & Sleeve - Hand Wrap & Unwrap Tool WWK-CO - Probe Pick - Sleeved Unwrapping Tool - Insulated Wire Loop Puller Insulated Wire Wrapping Kit $325.00 TK-WW5 5-Piece Wire Wrapping Tool Wire Wrapping Kit Complete and unique wire wrapping kit for working at a main distributing frame or for field service use. Insulated Wire Wrapping Kit For working at a main distributing frame or for field service use. Includes: - Wrap/unwrap tool - Wire Wrapping Tool - wire stripper 22-24 AWG - Wire Wrapping Bit 22-24 AWG - Wire Wrapping Sleeve 22-24 AWG Kit Contains: - Insulated Wire Wrapping Tool - Wire Wrapping Bit 22-24 AWG - Insulated Wire Wrapping Sleeve 22-24 AWG - Sleeved unwrapping tool 20-26 AWG - Wire stripper 22-24 AWG WWK-1 Wire Wrapping Kit $315.00 Battery & Electric Powered Wire Wrapping/Unwrapping Tool WWK-1INS Insulated Wire Wrapping Kit Kit Includes: - PTX Battery Wrap/Unwrap Tool - PTX-BC1 Charger - PTX-B 2 Batteries - DFB224 Dual Function Wrapping/Unwrapping Bit/Sleeve Set, 22-24 awg PTX Battery Powered Wire Wrapping Tool 115V Battery Tool Kit (Tool, Charger, 2 Batteries) Electric Wrap/Unwrap Tool - 115V Electric Wrap/Unwrap Tool w/Backforce - 115V $325.00 Bits & Sleeves for Wire Wrapping PTX Series Electric & Battery Powered Wire Wrapping/Unwrapping Guns This wire wrapping tool has a maximum usage rating of 2,500 cycles/day, will wrap 18 to 30 AWG wire. Available in both battery & electric models. PTX-KIT1DH PTX-KIT1 PTX-1 PTX-1BF $244.95 $395.00 $319.00 $235.00 $240.00 Wire Wrap Guns - Fully compatible with any make/model wire wrap tool. - 3” bits & sleeves. Call for other sizes AWG 22-24 22-24 24 24 26 26 Bit Part # KB224 Sleeve Part # P2224 KB24 P2426 KB26 P2426 Price $39.65 $17.25 $39.65 $17.25 $39.65 $17.25 Wrap/Unwrap Bit/Sleeve Set This patented product represents a truly revolutionary approach to wire wrapping, by combining the wire wrapping and the wire unwrapping functions into one bit/sleeve set. G100/R3278INS G100/R3278FL G200/R3278 G100/R3278 OK Industries line provides up to 10 revolutions per squeeze of the trigger. Accommodates wire sizes from 18 AWG-32 AWG using our full range of interchangeable wrapping bits and sleeves. G100/R3278INS G100/R3278FL G200/R3278 G100/R3278 Insulated Wire Wrap Gun Insulated Wire Wrap Gun w/ Flashlight Lexan Wire Wrap Gun Aluminum Wire Wrap Gun $125.00 $130.00 $95.00 $112.50 The bit is precision machined for high quality wire wrapping in the clockwise direction, but also includes the removal mechanism that is used to unwrap when operated counterclockwise. The user can easily switch back and forth between wrap and unwrap mode by retracting or extending the retractable sleeve, and flipping the switch on a PTX Wire Wrapping Power Tool. To prevent pin-to-pin shorting, the retractable wire wrapping sleeve is coated with a durable 1000V dielectric material. DFB224 Wrap/Unwrap Bit/Sleeve Set $95.99 Kynar Insulated Silver Plated Wire Wire Wrap Guns Ideally suited for many applications including production line work and wire wrapping. This wire is OFHC & provides a flexible yet abrasion resistant wire. The 24-28 AWG wire is UL 1422 and the 30 AWG wire is 1423. Wire is copper with 105°C maximum insulation temperature. Available in Blue, Yellow, White, Black, & Red *KSW for cut/strip/wrap applications. Low strip force wire is further processed for a low strip force for use with CSW bits and sleeves WG-350INS WG-350 WG-350L The Jonard line provides up to 10 revolutions per squeeze of the trigger, and accommodates wire sizes from 18-32 AWG. All wire guns are used for the electronics and telecommunication industries. WG-350INS WG-350 WG-350L Insulated Wire Wrap Gun Aluminum Wire Wrap Gun Lexan Wire Wrap Gun Major Credit Cards Accepted $105.00 $95.00 $75.00 Part # R24X-0100 R26X-0100 R28X-0100 R30X-0100 KSW-24X-0100* KSW-26X-0100* KSW-28X-0100* KSW-30X-0100* Insulation Dia. 0.030” 0.027” 0.024” 0.025” 0.030” 0.027” 0.0235” 0.0195” Roll Size 100ft 100ft 100ft 100ft 100ft 100ft 100ft 100ft Wire Size 24 AWG 26 AWG 28 AWG 30 AWG 24 AWG 26 AWG 28 AWG 30 AWG 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com Price $19.00 $14.45 $12.50 $11.25 $25.50 $22.60 $22.60 $21.25 87 Fluke Networks Punchdown Tools D914S Automatic Impact Tool SoftTouch D914™S Impact Tool includes a built in probe pic/spudger allowing you to choose from high & low impact settings. D914S D914S with 66/100 dually & Bix blade D914S with 66/100 & free blade D914S with both 66 & 110 blades D914S with 66 blade D914S with 110 blade 10061-503 10061-501 10061-120 10061-100 10061-110 $96.00 $81.00 $81.00 $71.00 $71.00 D914 Automatic Impact Tool The D914™ automatic impact tool is the only punch down tool to combine torque & impact. Combines two tools, the hook & spudger, into the handle. D914 D914 with 66/110 & free blade D914 with 66 & 110 blades D914 with 66 blade D914 with 110 blade 10051-501 10051-120 10051-100 10051-110 $70.00 $70.00 $58.00 $58.00 D814 Punchdown Tool Deluxe, all-in-one, telecom punch-down tool. Impact wheel has high & low settings. Automatic spring impacts to seat and/or terminate wires. D814 D814 with 66/110 dually & Bix blade D814 with 66/110 & free blade D814 with both 66 & 110 blades D814 with 66 blade D814 with 110 blade 10055-503 10055-501 10055-200 10055-000 10055-110 Fluke Networks increases the versatility and flexibility of its line of impact tools by offering a wide variety of interchangeable blades that permit each tool to perform multiple functions. Fluke Networks has the blades you need to terminate blocks and jacks quickly. $81.00 $62.00 $62.00 $52.00 $52.00 Fluke Network Replacement Punchdown Blades 10176-000 110 replacement blade 10056-000 66 replacement blade 10176-500 110 Eversharp replacement blade* 10056-500 66 Eversharp replacement blade* 10178-600 110/66 Eversharp dually replacement blade* 10665-000 Bix replacement blade 10565-000 Krone replacement blade 10565-110 Krone dually replacement blade 10465-001 3M system “D” bit replacement blade 10057-000 630 replacement blade 10436-001 Center Punchdown replacement blade 10051-200 Screwdriver replacement blade (D914) 10645-001 Wood screw started punch replacement blade 10051-300 66 torque adapter replacement blade (D914) $18.00 $18.00 $21.50 $23.00 $30.00 $47.00 $48.00 $63.00 $67.00 $21.00 $17.00 $21.50 $17.00 $29.00 *Eversharp blades last three times longer than standard punchdown tool blades. Paladin Tools Punchdown Tools SurePunch Pro Punchdown Tool SurePunch Pro is the first and only punchdown tool to have a detachable light making it easy to work in dark places. SurePunch Pro 3590 3588 3596 3597 3598 3599 SurePunch Pro PDT Handle (no blade) & Light SurePunch Pro PDT w/110/66 cut blade & light SurePunch Pro PDT w/110 reversible cut & punch blade SurePunch Pro PDT w/66 reversible cut & punch blade SurePunch Pro PDT w/BIX™ Cut-only blade & light SurePunch Pro PDT w/Krone LSA cut-only blade & light $55.55 $63.99 $63.99 $63.99 $74.00 $85.75 SurePunch Punchdown Tool Lanyard holes in the end make the SurePunch PDT easy to carry and hard to misplace. Uses twist-and-lock-style blades. SurePunch 3570 3571 3572 3573 3574 3575 3579 SurePunch PDT Handle only SurePunch PDT w/110/66 combination cut-only blade SurePunch PDT w/110 reversible cut & punch blade SurePunch PDT w/66 reversible cut & punch blade SurePunch PDT w/BIX cut-only blade SurePunch PDT w/Krone LSA blade SurePunch PDT w/110 & 66 reversible cut & punch blade $45.45 $54.15 $54.15 $54.15 $59.00 $59.00 $58.95 Impact Punchdown Tool Impact punchdown tool for terminating AWG 28-24 telephone cables into 66, 88, 108, 109, 110, 630A6, Bix™ & Krone®-type bifurcated terminals. Impact 3526 3527 3528 3535 3536 3532 Impact Punchdown Tool - handle only Impact Punchdown Tool w/66 blade Impact Punchdown Tool w/110 blade Impact Punchdown Tool w/630 blade Impact Punchdown Tool w/BIX-type blade Impact Punchdown Tool w/Krone-type blade $38.45 $52.40 $52.40 $55.90 $69.90 $55.90 Blades for Impact PDT Blades for SurePunch & SurePunch Pro PDT 110 630 Bix™ 110/66 110 66 Bix™ 4528 4529 4530 4571 4572 4573 4574 Paladin Tools Replacement Punchdown Blades 4571 SurePunch 110/66 Combination Cut-Only Blade 4572 SurePunch 110 Reversible Blade 4573 SurePunch 66 Reversible Blade 4574 SurePunch BIX Cut-Only Blade 4528 Standard Punchdown Replacement 110 Blade 4529 Standard Punchdown Replacement 630 Blade 4530 Standard Punchdown BIX Type Blade $14.30 $14.30 $14.30 $23.50 $18.45 $15.50 $29.99 Platinum Tools Punchdown Tools PRO Series Punchdown Impact Tool terminates & trims wires in 66, 110 krone & BIX cross connect blocks. Used to terminate and trim wires in 110 & 630 style wall jack modules. Pro Impact 13100 13105 13106 13107 13108 13109 PRO Punchdown Impact Tool Handle Only PRO Punchdown Impact Tool w/66 blade PRO Punchdown Impact Tool w/110 blade PRO Punchdown Impact Tool w/ 66 & 110 Blades PRO Punchdown Impact Tool w/110 EZ-Data Cut Blade PRO Punchdown Impact Tool w/66/110 Combo Blade $35.00 $48.00 $48.00 $60.00 $55.00 $48.00 EZ-Tune Punchdown Tool Tool terminates/trims wires in 110 & 630 wall jack modules. 13200 EZ-Tune Punchdown Tool, Handle Only 13208 EZ-Tune Punchdown Tool with 110 EZ-Data Cut Blade $39.95 $58.95 EZ-Tune Punchdown Impact Tool Tool can terminate and trim wires in 110 & 630 style wall jack modules. Compatible with tools & blades by Harris, Ideal, & others Impact 88 13000 13005 13006 13007 Punchdown Impact Tool Handle Only Punchdown Impact Tool w/66 blade Punchdown Impact Tool w/110 blade Punchdown Impact Tool w/66 & 110 Blades Datacomtools.com TM $33.50 $45.00 $45.00 $56.95 66 110 630 66/110 110 EZData Bix Krone PDT Extension 13001 13002 13003 13004 13021 13023 13024 13022 Platinum Tools Replacement Punchdown Blades 13001 13002 13003 13021 13004 13022 13004BL-C 13023 13024 66 Style Blade 110 Style Blade 630 Style Blade 66/110 Combo Blade 110 Style EZ-Data Cut Blade Punchdown Tool Extension 110 Style EZ-Data Cut Blade Knives, 3 Pack BIX™ Style Blade Krone™ Style Blade $13.95 $13.95 $13.95 $13.95 $18.95 $17.95 $7.50 $28.50 $28.50 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply Pro-Tool Kits All the professional tools you need to cut, strip, clean and connect network phone and data lines to blocks and jacks. Bundled together in our sleek form-fitting PVC Dur-A-GripTM Tool Pouch holds your tools securely inside, even upside down. Six tool kits combinations to choose from to meet a multitude of applications. - All kits include ergonomically designed Dur-a-Grip pouch for convenient tool storage on belt - D914™ and D814™ industry standard punchdown tools make for solid terminations - Easy to use cable stripper quickly rings and slits many types of cable - Cut and strip wire cleaner and faster with the Electricians’ D-Snips - Six tool kits combinations available for a multitude of applications IS40 IS60 Pro-Tool Kit: D914S Impact Tool, Electrician’s D-Snips, Cable Stripper, Mini Maglite, & Dur-a-Grip Pouch IS50 Pro-Tool Kit: D914S Impact Tool, Electrician’s D-Snips, Cable Stripper, EverSharp 66/110 Cut Blade, and Dur-A-Grip Pouch IS50 IS40 Pro-Tool Kit: D814 Impact Tool, Electrician’s D-Snips, Cable Stripper, EverSharp 66/110 Cut Blade, Probe Pic, and Dur-A-Grip Pouch 11293-000 11292-000 11291-000 IS60 Pro-Tool Kit IS50 Pro-Tool Kit IS40 Pro-Tool Kit $174.00 $149.00 $141.00 IS60 Krone Punchdown Tool The Versatile Krone Tool the only one you need. The Krone Tool terminates and trims wires with one punch. It’s the only tool you’ll need to add, Change or remove Krone connections. 6417-2055-01 Krone Punchdown Tool $70.00 ProPunch 110 Multi-pair Punchdown Tool - Smooth operation - Comfortable, rugged handle absorbs punch recoil - Cut and punch blade cassette or switch blades for punch only - Terminates 28-22 AWG (.08-.34 mm²) solid or stranded wires with single insulation - Delivers more than 1.5 times the force of other multi-punchdown tools on the market using less hand force - Terminates in a single punch - including 23 AWG Cat6 cable - Performs in excess of 30,000 cycle punches 3560 3561 ProPunch 110 5 Pair Punchdown Tool ProPunch 110 4 Pair Punchdown Tool $18.25 $18.25 D-Impactor 5-Pair Impact Tool The D-Impactor™ 5-pair impact tool allows technicians to simultaneously cut and terminate five copper pairs on a 110 block. This rugged, easy-to-use tool saves time and reduces hand stress by cutting down on the total number of manual terminations, and combining the cut and no-cut blades into a single unit allows users to reverse cutting blades at record speeds. Fewer moving parts and the patented blades guarantee optimal performance for the life of the tool. 10059-000 D-Impactor 5-Pair Impact Tool $182.00 C5 Tool The 5-pair termination tool is a versatile impact tool designed to terminate and cut UTP cable, and seat connecting blocks. The impact mechanism and termination blades have been designed to reliably terminate and cut UTP cable the first time, every time. Features an easy to hold, ergonomically designed handle that helps reduce fatigue when trimming wire or seating connection blocks to the wiring base. S788J5 C5 Tool $265.00 Major Credit Cards Accepted 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com 89 EZ-RJ45 Connectors The EZ-RJ45 connectors, simplify twisted pair terminations by allowing the wire to be inserted through the connector and out the front. This allows the technician to easily verify the proper order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket & seating tightly in the rear of the connector. It also guarantees that the wires will be properly flush to the front of the connector. 202003J 202035J 202010J 202036J EZ-RJPRO™ HD Crimp Tool EZ-RJ45® Connectors, Jar of 100 Strain relief for EZ-RJ45® Cat. 5e connectors, Jar of 100 EZ-RJ45® Cat 6+ connectors, Jar of 100 Strain Relief EZ-RJ45® Cat 6+ connectors & shielded Cat 5e connector, Jar of 100 $62.00 $24.00 $70.00 $24.00 The new EZ-RJPRO™ HD Crimp Tool is designed for the professional installer providing a ratcheted, high leverage, ultra stable platform for consistent, repeatable terminations. This heavy duty tool is the perfect solution when working with high performance, larger OD cables that are tougher to terminate due to larger wire gauges, thicker, harder insulation on the conductors and pair separating splices. Not only will you overcome these connectivity obstacles but you can be assured that every termination will meet FCC specifications. Compatible with all EZ-RJ45® and EZ-RJ12/11 connectors as well as all standard modular plugs, except AMP. 100054C Telemaster Kits EZ-RJPRO™ HD Crimp Tool $86.95 33-750: - Basic termination kit for 10Base-T - Includes, UTP/Coax Stripper, Telemaster RJ-11/RJ-45 Tool, (50) 8-Position RJ-45 Non-Keyed Solid Plugs - Durable hard case 33-704: - Basic kit with multifunctional telephone tool to cut, strip, and crimp - Kit includes, Telemaster™ for RJ-11/RJ-45 Plugs, (15) 4-Position, RJ-11 Stranded Modular Plugs, (15) 6-Position, RJ-11 Stranded Modular Plugs, (15) 8-Position, RJ-45 Stranded Modular Plugs - Durable hard case 33-750 33-704 Basic Data & Video Kit 33-750 33-704 Economy 10Base-T Telemaster Kit RJ-45, RJ-11 Telemaster™ Kit - Basic Data and Video Kit - Data T-Cutter - UTP Stripper - Stripmaster Wire Stripper for RG-6 - Punchmaster II Punch Down Tool w/ 110 Blade - OmniSeal XL Compression Tool - TRACETone Tone Generator & Amplifier Probe - VDV Multimedia Cable Tester - Journeyman Electrician’s Tote 33-916 Data & Video Kit Basic Data & Video Kit 33-917 Datacomtools.com $395.00 Kit includes professional tools to terminate both coax and twisted pair cables. VDV gives user the ability to test terminated cables. - Data/Video Kit - Data T-Cutter - 7-in-1 Screwdriver - UTP Stripper - Coax Stripper w/ replacement Cartridge - Punchmaster II Punch Down Tool w/ 110 Blade - 110/66 Blade combo punch down blade - Crimpmaster Crimp Tool for RJ-45 Modular Plug 90 $115.00 $68.15 TM Data & Video Kit - OmniSeal XL Compression Tool - Probe Pic and Spudger - F/BNC Connector Insertion/Removal Tool - VDV Multimedia Cable Tester - Amplifier Probe - Electrician’s Scissors w/ Stripping Notch - Large Mouth Bag- 13 in. $495.00 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply 99 Series Hand Tool Kits Series 99 Interchangeable Blade Tool Kit - 39-piece kit contains popular Series 99 tools. - 2 extra pockets permit addition of pliers, snips, or other tools. - Available in a roll-up canvas case. L: 14” W: 13.25” H: 10.1” Weight: 23.68lbs. 99MP 99SM 99SMX 23-Piece Series 99 Service Roll Kit, Plastic Case - Versatile 23 piece set of tools. - Provides quick change tools & tool combinations. - Speeds assembly/service work. - Available in a hard plastic case. L: 10.875” W: 10” H: 9.25” Weight: 17.4lbs. L: 15.625” W: 15” H: 9” Weight: 25.8lbs. 39-Piece Series 99 Inerchangable Blade Tool Kit 23-Piece Series 99 Service Roll Kit, Canvas Case 23-Piece Series 99 Service Roll Kit, Plastic Case 9-Piece & 11-Piece Series 99 Allen Hex Screwdriver Set - 9-Piece & 11 Piece Series 99 screw/nutdriver sets. - See thru plastic case 99PS41MMBP 99PS41MM 99PS40BP 99PS40 99PS40V 99PS51MM 99PS50 99PS50V 23-Piece Series 99 Service Roll Kit, Canvas Case - Versatile 23 piece set of tools. - Provides quick change tools & tool combinations. - Speeds assembly/service work. - Available in a roll-up canvas case. 13-Piece Series 99 Screw/ Nutdriver Set - 13-piece screw/nutdriver set. - Stand-up plastic case. $193.20 $166.95 $166.95 12-Piece Series 99 Compact Nutdriver Set - 12-Piece Nutdriver Set. - Convenient see-through stand-up plastic case. 9-Piece Series 99 Ballpoint Allen Hex Screwdriver Set 9-Piece Series 99 Standard Allen Hex Screwdriver Set 11-Piece Series 99 Ballpoint Allen Hex Screwdriver Set 11-Piece Series 99 Standard Allen Hex Screwdriver Set 11-Piece Series 99 Allen Hex Screwdriver Set, SAE, Carded Set 12-Piece Series 99 Compact Nutdriver Set, Metric 13-Piece Series 99 Compact Screwdriver and Nutdriver Set 13-Piece Series 99 Compact Screwdriver and Nutdriver Set, Carded $55.11 $44.31 $67.65 $44.88 $44.88 $61.00 $56.68 $56.68 14-Piece Series 99 Screw/ Personal Computer Repair Kit Nutdriver Set - Ideal for repairs on PC’s - Kit contains: 9 regular nutdriver - Contains 12 anti-static ship tools. blades, 2 slotted & 2 Phillips - Tools fit securely in roll-up pouch. screwdrivers, 1 amber handle, & a roll-up canvas case. L: 10” W: 8” H: 6” Weight: 8.4lbs. 99PR 99SPC 14-Piece Multi-Purpose Set Personal Computer Repair Kit Torx Screwdriver Blade Kit - Interchangeable Blades. - Contains 6 blades, 4” long & regular 991 amber handle. 99XTD7 99PA50 $72.54 $45.91 Stubby Blade Tool Kit - Series 99 screw/nutdriver Set. - Contains 12 screw/nutdriver sizes. - Convenient vinyl carry pouch. Torx Screwdriver Blade Kit Stubby Blade Tool Kit $31.23 $23.33 Insulated Hand Tool Kits 25-Piece Jouneyman Insulated Kit - Reflex super T-Stripper wire stripper - Wire stripper cutter - 9 1/4” side linesman pliers - 8” diagonal pliers w/angled head - 8 1/2” long nose pliers - 10” tongue and groove pliers - 9 1/2” high-leverage cutter - 9 3/4” multicrimp tool - Knife - Volt-sensor NCV tester - Fuse Puller - 7 1/2” long - Heavy-Duty soft tool case Insulated Nutdrivers - Hex Nutdrivers: 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, & 9/16” 35-9304 - Screwdrivers: 1/8” x 3”, 3/16” x 5”, 1/4” x 6”, 5/16” x 6” & 3/8” x 8” Phillips: #1 x 3”, #2 x 4”, #3 x 6” - Hex Nutdrivers: 3/16”, 1/4”, 5/16”, 3/8”, 7/16” & 1/2” 35-9302 25-Piece Jouneyman Insulated Kit 17-Piece Standard Insulated Kit - Reflex super T-Stripper wire stripper - 9 1/4” side linesman pliers - 8” diagonal pliers w/angled head - 8 1/2” long nose pliers - 10” tongue and groove pliers 0257-01I 17-Piece Standard Insulated Kit - Screwdrivers: 3/16” x 5” & 1/4” x 6” Phillips: #2 x 4” 9-Piece Basic Insulated Kit Major Credit Cards Accepted $76.80 $665.00 9-Piece Basic Insulated Kit - Reflex super T-Stripper wire stripper - 8 1/2” long nose pliers - 9 1/4” side linesman pliers - 9 1/2” high-leverage cutter - 8” diagonal pliers w/angled head - Fuse Puller - 7 1/2” long - Heavy-Duty soft tool case 35-9300 7-Piece Insulated Nutdriver Set 7-Piece Insulated Screwdriver Kit - Slotted head: 3/32” x 3”, 1/8” x 4”, 1/4” x 6”, & 5/16” x 7” - Phillips: #1 x 3”, #2 x 4”, & #3 x 6” - Screwdrivers: 1/8” x 3”, 3/16” x 5”, 1/4” x 6”, 5/16” x 6” & 3/8” x 8” Phillips: #1 x 3”, #2 x 4”, & #3 x 6” 35-9301 $188.35 7-Piece Insulated Nutdriver Set - Rated to 1000V AC/DC - Meets IEC 60900 & ASTM F1505 standards. - Heavy-duty, built for longer life. - Rugged deep well sockets for screw clearance. - Precision heads for accurate fit. $895.00 - 9 1/2” high-leverage cutter - Volt-sensor NCV tester - Fuse Puller - 7 1/2” long - Heavy-Duty soft tool case - Electrician’s skinning knife Insulated Nutdriver Kit with Hard Case $424.95 TK-70-INS 7-Piece Insulated Screwdriver Kit $30.35 11-Piece Insulated Tool Kit - Slotted head: 3/32” x 3”, 1/8” x 4”, 1/4” x 6”, & 5/16” x 7” - Phillips: #1 x 3”, #2 x 4”, & #3 x 6” - Linemans plier 7 1/4” - Long nose plier 6 1/4” - Diagonal plier 6 1/4” - Wire Stripper 6 1/2” TK-110-INS 11-Piece Insulated Tool Kit 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $97.65 91 Hand Tool Kits 8 & 5 Piece Screwdriver Set 35-298 35-297 1/4” x 6” HD cabinet • • 1/4” x 6” shank keystone • 1/4” x 4” HD keystone • • 5/16” x 6“ keystone • • 3/16” x 3” cabinet • 3/16” x 6” cabinet • • Phillips #1 x 3” • Phillips #2 x 4” • • Heavy-duty vinyl pouch • • 35-298 35-297 35-299 0153-42C 35-299: Nutmaster 7pc Set 0153-42C: 6-in-1 Multi-Tool - Included: 3/16” x 3 1/4”, - Versatile multi-bit screwdriver, 1/4” x 3 1/4”, 5/16” x 3 6 tools in one. 1/4”, 11/32” x 3 1/4”, - Precision machined, steel bits 3/8” x 3 1/4”, 7/16” x 4”, - High-grade, rust resistant, 1/2” x 4”. chrome-plated finish 8-Piece Screwdriver Set 5-Piece Screwdriver Set Nutmaster 7-Piece Set 6-in-1 Multi-tool $53.69 $39.40 $58.89 $7.25 0253-01C: 7-Piece Nutdriver Set 7 & 4 Piece Screwdriver Sets - Included: 3/16”, 1/4”, 5/16”, - Included in 0153-02C: 3/16” x 4”, 3/16” x 6” & 1/4” x 4” cabinet, 11/32”, 3/8”, 7/16”, & 1/2” - Hollow shaft for screw clearance. 1/4” x 4” & 5/16” x 6” keystone, - Handle marked for easy #1 x 3” & #2 x 4” Phillips. identification of nutdriver use. - Included in 0353-01C: Phillips #0, #1, #2, & #3 7-Piece Screwdriver Set 4-Piece Screwdriver Set 7-Piece Nutdriver Set 0153-02C 0353-01C 0253-01C $39.98 $22.99 $33.45 Hand Tool Kits 11-Piece Compact Convertible Screw/Nut Driver Set - Equipped with the black, “Piggyback” amplifier handle. - Set housed in an easy to open, clear plastic case PS130 HS618 413MM 10-Piece SAE Full Hollow Shaft Nutdriver Kit - Nutdrivers included: 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, & 9/16” 10-Piece Metric Drilled Shaft Nutdriver Kit - Nutdrivers Included: 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 11mm, & 13mm 11-Piece Compact Convertible Screw/Nutdriver Set 10-Piece SAE Full Hollow Shaft Nutdriver Kit 10-Piece Metric Drilled Shaft Nutdriver Kit $37.64 $60.46 $62.24 34 Piece Dura-Driver Power Driving Ratcheting Screwdriver Kit - Screwdriver with 3 torque positions. - 7 power nutdrivers, SAE. - 7 Power Nutdrivers metric. - 18 screwdriver bits. - Storage case 39 Piece Dura-Driver Mechanics Ratcheting Screwdriver Kit - Dura-driver ratchet screwdriver. - 9 fractional & 9 metric sockets. - 18 screwdrivers bits. - 2 socket adapters. - Storage case 39-Piece Screwdriver Kit 34 Piece Screwdriver Kit SDMBR1 SDMBR2 $37.07 $37.07 Hand Tool Kits 33-Piece Screwdriver Set Micro Mini II Screwdriver Set Hollow Shaft Nut Drivers - Bits Included: Slotted: 2.0, 1.5, These are full length hollow shaft - Contains: Pozi Drive PZ1 & PZ0, Phillips: 000, 00, 0, 1. Slotted: 1.2, 1. Phillips: 0000, 000, 00, 0. nutdrivers for working with long 1, 1.5, 2, 2.5, 3, 3.5, 4. Torx®: 4, Torx®: 3, 4, 5, 6 bolts. Designed with ergonomic 5, 6, 7, 8, 9, 10, 15, 20. Hex: 0.7, color coded handles. Handles 0.9, 1.3, 1.5, 2, 2.5, 3, 4, M5 & 6 provide greater torque and user Socket, M4 Shaft comfort. Overall length 7”. ND631 19101 19103 Hollow Shaft Nut Drivers 33-Piece Screwdriver Set Micro Mini II Screwdriver Set $38.00 $20.95 $13.79 Twist-a-Nut™ Wire Connector Tools Twist-a-Nut Conduit Wiring Kit - Includes Twist-a-Nut™ Screwdriver, Twist-a-Nut™ Deburring Head Square Tip, Tap Tool Shaft, 3 Spare Bits & 8-pocket carrying Pouch. 35-926 35-922 35-908 35-909 35-988 92 Twist-a-Nut™ Conduit Wiring Kit w/7-in-1 screwdriver 6-in-1 Twist-a-Nut™ Tapping Tool 7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver 7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver with square tip 9-in-1 Ratch-a-Nut™ Screwdriver TM TAL-001C Plastic Shaft Autoloader, Multi-Bit Screwdriver TPAL-001C Metal Shaft Autoloader, Multi-Bit Screwdriver TBK-001C 31 Piece Bit kit in Clam-Shell Packaging. $22.95 $31.95 $22.95 Wire Connectors 6-in-1 Twist-a-Nut™ Tapping Tool 9-in-1 Ratch-a-Nut Screwdriver - Forms new threads, re-forms - Ratcheting wire connector burred threads and cleans out wrench prevents finger fatigue obstructions. and gets in tight spots. - Handle is interchangeable w/7-in- - Ergonomic, slip-free comfort grip 1 Screwdriver & Conduit Deburrer - Accepts Twist-a-Nut™ bits. Datacomtools.com Autoloader Multi-Bit Screwdrivers 31 Piece Bit Kit - Pump action changes bits instantly - Contains: Phillips: P0, P1, P2, PHR2, P3. Slotted: 5/32” (2pcs.), 7/32”, 1. Pull back the handle 1/4”, 9/32”. Torx: T10, T15, T20, 2. Rotate the shaft to select your T25, T27, T30, T40. Hex: 5/64”, desired bit. 3/32”, 7/54”, 1/8”, 9/64”, 5/32”, 3. Push the handle forward. 3/16”, 7/32”, 1/4” Your bit is delivered instantly! $50.15 $24.25 $11.20 $10.95 $21.30 - Wire-nut: Fixed, square-wire spring creates its own threads maintains a secure positive grip - Wing-nut: Wings provide a secure grip for extra leverage on maximum wire combinations. - Twister: Ribbed cap provides a secure grip. Wire-Nut Part # 30-071 30-072 30-073 30-074 30-076 30-651 30-652 30-341 30-342 Wing-Nut Type Wire-nut Wire-nut Wire-nut Wire-nut Wire-nut Wing-nut Wing-nut Twister Twister Twister Wire Size 22-16 AWG 22-14 AWG 22-14 AWG 18-12 AWG 18-10 AWG 18-10 AWG 18-8 AWG 22-8 AWG 18-8 AWG Voltage Rating 300V 300V 600V 600V 600V 600V 600V 600V 600V Qty 100 100 100 100 100 500 500 100 50 Color Gray Blue Orange Yellow Red Yellow Red Tan Gray Price $63.45 $71.55 $82.85 $94.85 $140.00 $79.65 $102.35 $132.00 $254.95 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply Terminal Crimp Kits 500-037: Terminal Crimp Kit - Ratcheted crimper - Ring insulated terminal: 22-16 AWG x 50, 16-14 AWG x 40, 12-10 AWG x 20. - 1300 series terminal crimper. - Butt splice insulated: 22-16AWG - Assorted 22-12 AWG terminals. x 30, 16-14AWG x 20, 12-10 x 15. 4305: Terminal Crimp Kit Economical terminal crimper kit for electrical and control panel installation and wiring. 4305 1308 500-037 STK-1 STK-1: Terminal Box - 1 Scotchlok crimping tool. - 1 ScotchCode tape dispenser. - 100 cable ties 06225. - 100 cable ties 06226. - Plus more. For full listing go to: www.datacomtools.com Terminal Crimp Kit Insulated Lug Crimper (crimps 22-10 AWG insulated terminals & lugs) Terminal Crimp Kit Scotchlok Terminal Box $73.85 $58.99 $33.85 $179.99 1921: Terminators Combo Tool - Crimp, strip, & cut wire with one tool & also cut/rethread screws. - Hardened alloy steel with black oxide finish. - Pivot joints w/steel brushing - New, softer grips. 1923: Crimping/Stripping Tool - Up-front cutter for snipping hard-toreach wires. - Narrow nose for tight boxes - Wire loping holes in jaw. - Screw cutting stations are collapsed around the pivot - 20% less force is required. Terminators Combination Tool Crimping/Stripping Combination Tool 1921 1923 $28.20 $24.15 JIC-22035 Price: $15.00 $15.99 $11.95 $10.45 $11.95 PROBE-PIC Brand: Fluke Networks Paladin Tools Jonard Jonard Jonard 1923 44007000 1900 M-216C/REX M-216C/RX M-216C/EX 1915 - 3/8” & 7/16” hex sockets to open panels. For more info on can wrenches go to: www.datacomtools.com 44600000 M-216C/EX M-216C/RX M-216C/REX 1900 44007000 Can Wrenches & Probe Picks - Excellent for positioning, tracing, separating, and removing cut pieces of insulation and wire. 44600000 1915 PA1923 PROBE-PIC JIC-22035 Brand: Fluke Networks Paladin Tools Paladin Tools Siemon Jonard Price: $6.00 $4.20 $9.25 $3.25 $2.75 Cable Tie Guns & Ties Cable Ties Cable Tie Installation Tool Cable Tie Bag - Consistent, positive tension. - Keeps your cable ties right where - Flush cut-off leaves no projections you need them, eliminates loss to damage nearby wires or with this convenient bag that components. clips securely onto your belt. - Use with ties up to 0.25” - Adjustable tension for changing - Scrap tail stays in tool until trigger - Cable Ties are not included is released. cable bundle pressure. Cable Tie Gun Cable tie gun for tightening ties around wire & cable bundles. 1828.1 41-990 IT-BAG Cable Tie Gun Standard Cable Tie Installation Tool Cable Tie Bag $45.00 $244.89 $13.95 - Cable ties can be used in countless applications - Provides consistent performance and reliability - Available in Natural and Black Part # 08387 08388 08600 08286 10038 10039 Style Natural Black Natural Black Natural Black Length 7.5” 7.5” 11” 11” 14.5” 14.5” Bundle dia. 1/16”-1 3/4” 1/16”- 1 3/4” 1/16”-3” 1/16”-3” 3/16”-4” 3/16”-4” Strength 50lbs 50lbs 50lbs 50lbs 120lbs 120lbs Qty 1000 1000 1000 1000 100 100 Price $25.00 $25.00 $45.00 $55.00 $98.00 $110.00 Saws Keyhole Saw - Blade & handle design provides max. strength. - Hardened blade with clog free teeth. - Pointed tip punches thru drywall. - Blade cuts on both push/pull strokes. - Ergonomic handle with non-slip grip. Ergonomic Hacksaw - Angled handle for easier cutting. - Blade can easily be adjusted for flush cutting. - Easy tensioning wing-nut keeps blades tight for straighter cuts. - Cushioned ergonomic grip for performance and comfort. - Includes: 12” x 24T bi-metal blade. 35-261 Ergonomic Hacksaw $15.45 301A Heavy-Duty Hacksaw $29.95 311 12” Heavy-Duty Hacksaw - Over-molded rugged design for heavy-duty use & comfort. - Fully-adjustable blade tension up to 30,000 psi for longer blade life. - Alternative 45° blade mounting allows for flush cutting. - Mounting for most reciprocating saw blades for extra versatility. - Complete with bi-metal blade. 333A 333-1218 333-1224 333-1232 12” Heavy-Duty Hacksaw 12” Bi-Metal Blade, 18 Teeth per inch 12” Bi-Metal Blade, 24 Teeth per inch 12” Bi-Metal Blade, 32 Teeth per inch Major Credit Cards Accepted $24.00 $8.25 $8.25 $8.25 $8.30 Retractable Saw Set - 6” blade retracts in the handle. - Quick change blade adds versatility. - Accepts most 6” saw blades. - Blades cut on both push/pull. Heavy-Duty Hacksaw - Rugged frame provides lightweight rigidity & exceptional control. - Stores up to nine extra blades. - Blades can be adjusted for flush cutting & tension to 25,000 psi. - Includes: 12” x 24T bi-metal blade. 35-260 Keyhole Saw Retractable Saw Set $10.95 Electrician’s Jab Saw - Includes replaceable bi-metal wallboard blade - Hold all reciprocating & hacksaw blades. - Ergonomic grip. 35-275 36-088 Electrician’s Jab Saw Bi-Metal Wallboard Blade 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $17.75 $4.20 93 Levels Measuring Wheel Mini Magnetic Bubble Level Electrician’s Torpedo Level - Mini torpedo design with handy - 4 open vial ports for viewing. - Perfect for pipe & conduit work. “no-dog” attachment for bending. - 4 earth magnets allow hands- - 3 earth magnets provide superior holding strength. free use on metal surfaces. L107 L77 L97 Electrician’s Torpedo Level Mini Magnetic Bubble Level Mini Magnet Laser Level Mini-Magnet Laser Level - Laser can work on all planes. - 3 earth magnets provide superior holding strength. $37.25 $34.91 $88.30 Torpedo Level 9” Measuring Wheels - 9” aluminum frame with magnetic - MW38: Large wheel ideal for & v-grooved edges. uneven terrain. - White windows provide easy - MW18: Ideal for real estate or reading of plumb level & 45° mitre. homeowners. Fits into a briefcase 35-205 MW38 MW18 Torpedo Level 9” Contractor Measuring Wheel, Feet/Inches in 8ths Executive Measuring Wheel, Feet/Inches in 8ths $16.85 $98.00 $50.00 Knives Cable Knife - Short blade (1.75”) for strength. - Cutlery-steel blade for durability. - No-slip, easy-to-grip handle. - Cuts various insulation types. 44400-000 KN-6 KN-7 Cable Splicing Knife The tough cutlery steel blade is extremely sharp & cuts easily through many types on insulation. Cable Knife Cable Splicing Knife Ergonomic Cable Splicing Knife $19.00 $7.75 $8.50 Folding Utility Knife Utility Knife with Blades - Retractable 3-position blade for - Quick-change retractable blade system safety & convenience. - No disassembly required - Blade storage in pop-up holder. - Packaged with 3 serrated blades. - Built-in pull-line cutter. 0652-11 35-286 35-300 Cable Splicing Knife The KN-7 is an ergonomically designed knife for easy to grip feel. Cutlery-steel blade is sharp & cuts thru many insulation types. Utility Knife with Blades Folding Utility Knife Hawkbill Knife Hawkbill Knife - 2 1/4”, curved, carbon stainless steel blade locks in position. - Buyrate® Non-slip Handle - Brass liners $6.60 $33.50 $10.25 Comfort Grip Utility Knife - Retractable knife w/11 positions. - Quick change blade release. - Blade storage can hold 3 blades - Comfort grip for ease of use. Folding Utility Knife - Blade safely folds into the handle. - Quick-change for fast replacement. - Blade lock adds safely when open - Rust free steel design for durability. WK500V Quick Change Comfort Grip Utility Knife WKFQ4R Folding Utility Knife with Quick Change Progressive knife and scissors kit Progressive’s Knife and Electrician’s Scissors are designed for cutting cable, telephone wire and stripping insulation. PT-K01 TK-400 $11.92 $15.76 Splicer’s Kit This compact kit contains a special purpose splicer’s knife, scissor and leather pouch. Progressive knife and scissors kit Splicer’s Kit $36.50 $24.25 Gloves High-Dexterity Gloves Tough, soft and comfortable to wear Handyman’s Gloves - Clarino synthetic leather, tough, soft, & washable - Elastic wrist keeps debris out. CLC125 CLC135 CLC145 Boxer Gloves - Neoprene knuckle & wrist cuff provides padding. - Wing wrist strap for perfect fit. Handyman’s Gloves M, L, or XL Boxer Gloves M, L, or XL Tradesman Gloves M, L, or XL Tradesman Gloves - Clarino synthetic leather, tough, & washable. - Textured palm pads for better grip. $25.50 $32.50 $32.50 - Resists shrinking, stretching, & hardening. - Wing closing wrist strap for perfect adjustments, keeping debris out & easyon/easy-off. - Stretch fabric for flexibility and fit with padded knuckles. - Textured palm pads for better grip, extra wear, and added durability. - Thumb design for flexibility & Lycra side panels for improved dexterity. - Terry cloth to remove sweat or debris from face. 0358-11XL High-Dexterity Gloves, Mechanics XL 0358-11L High-Dexterity Gloves, Mechanics L $25.20 $25.20 Connector Crimping Pliers UR/UR2, UY, UY2, UG Connectors Each of the pliers to your left are capable of crimping these connectors. Shipped in boxes of 100. Crimping Pliers & Side Cutter - A special stop behind cut out prevents damage to connectors. JIC-891 JIC-21257 11294000 94 Telecom Long Nose Pliers - Side cutting blades, a crushing slot, & a thin knurled nose to facilitate handling of wire. Connector-Crimper Pliers with Side Cutter Telecom Long Nose Pliers Need-L-Lock Crimping Pliers Datacomtools.com TM Need-L-Lock’s - 4-in-1 tool combines connector crimper with needle-nose pliers so you can carry one less tool. $14.25 $21.45 $16.00 Part # UR UR2 UY UY2 UG Features Gel-Filled Polycarbonate Gel-Filled Polycarbonate RUS Listed Gel-Filled Polycarbonate Gel-Filled Polycarbonate RUS Listed Flame Retardant AWG 19-26 19-26 22-26 19-26 19-26 $13.25 $11.75 $11.75 $9.95 $19.85 Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply Pliers JIC-683 JIC-2288 B-Side Cut Pliers These pliers are high leverage for cutting bolts, nails, & many sizes of wire includes highstrength wire. JIC-683 JIC-2288 JIC-7858 35-3038 35-036 35-037 35-038 35-039 35-3038, 35-036, 35-037, 35-038, 35-039 High Leverage Cutters Diagonal Cutting Pliers Crafted for heavy-duty wire - Standard-bevel knives. cutting & made of specially - .03” & .045” skin holes. forged allow steel designed - Crusher used for multifor strength & cutting ability. purpose wire work. Long Nose Pliers - Narrow profile head designed for working in tight areas. - Serrated jaws provide secure gripping surface. B-Side Cut Pliers High Leverage Cutters Telecom Diagonal Cutting Pliers 8 1/2” Long Nose w/Cutter & SmartGrip™ Handles 6” Long Nose w/Cutter & Dipped Handles 7 3/4” Long Nose w/Cutter and Dipped Handles 8 1/2” Long Nose w/Cutter & Dipped Handles 8 1/2” Long Nose w/Cutter, Stripping holes for 12 & 14 AWG, & Dipped Handles 35-4012, 30-4430 30-5419, 30-5420, 35-5012, 30-5430 Side-Cutting Pliers: SureGrip Handles - High leverage pivot for less cutting force. - Induction hardened teeth for long life. - Cross-hatched jaws so wires wont slip when pulled. 35-4012 30-4430 30-5420 35-5012 30-5430 35-3028 35-3029 35-029 35-028 JIC-7858 $15.20 $15.25 $19.95 $34.95 $27.25 $28.45 $33.25 $38.15 35-3028, 35-029, 35-028 $31.20 $37.95 $17.20 $27.05 $17.95 $37.25 $37.75 $31.90 $30.15 Pliers 35-3052 35-052 35-4430 35-5430 Tongue and Groove Pliers - Chrome vanadium steel for durability. - Ergonomic handles for comfortable, all-day use. 9 1/2” Cable Cutter w/SmartGrip Handles 9 1/2” Cable Cutter w/ Dipped Handles 10” Tongue & Groove Pliers w/SmartGrip Handles 10” Tongue & Groove Pliers w/Dipped Handles $45.25 $43.25 $23.35 $16.20 35-3012, 30-3430, 35-012, 30-430 6” Diagonal-Cutting Pliers 9 1/4” Side-Cutting Pliers - Chrome vanadium steel for durability. - Drop-forged, high-carbon steel - High leverage pivot requires less construction. cutting force. - Knife to anvil blades never need - Knife-to-knife blades for easy cutting. resharpening. - Induction hardened teeth for long life. - Cuts hardened wire, bolts, and ACSR. - Ergonomic handles for comfortable, all-day use 35-4026 35-4028 35-4029 35-5028 35-5029 35-3012 30-3430 35-012 6” Diagonal-Cutting Pliers w/SmartGrip 8” Diagonal-Cutting Pliers w/SmartGrip 8” Diagonal-Cutting Pliers w/Angled Head & SureGrip 8” Diagonal-Cutting Pliers w/Dipped Handles 8” Diagonal-Cutting Pliers w/Angled Head, & Dipped Handles Side-Cutting Pliers w/Crimping Die & SmartGrip Side-Cutting Pliers w/Fish Tape Puller & SmartGrip Side-Cutting Pliers w/Fish Tape Puller & Dipped $20.25 $25.25 $26.00 $20.15 $20.85 $41.25 $55.90 $29.90 Surge Multitool 0151-09M, 0151-08M High-Leverage Side Cutter - Rugged riveted construction for smooth precise action. - Custom grip allows area for user identification. - Wider grip provides larger load bearing area. 0151-09M 0151-08M 0251-08M 0251-07M 0251-06M 0251-05M 0351-08M 0351-07M 0351-06M 0451-12M 0451-10M 35-4430, 35-5430 Cable Cutters - High-carbon steel construction. - Precision-ground, hardened cutting edges provide accurate cuts without cable distortion. - Designed for maximum leverage with minimum effort. - Cuts 2/0 copper & 4/0 aluminum 35-4026, 35-4028, 35-4029, 35-5026, 35-5028, 35-5029 Side-Cutting Pliers: Dippled Handles Diagonal-Cutting Pliers - High leverage pivot for less cutting - Knife-to-anvil blades never need force. resharpening. - Induction hardened teeth for long life. - High-leverage provides 40% more - Cross-hatched jaws so wires wont slip cutting power. when pulled. 9 1/4” Side-Cutting Pliers w/SureGrip Handles 9 1/4” Side Cutting Pliers w/Crimp, Fish Tape Puller, & SureGrip Handles 8” Side-Cutting Pliers w/Dipped Handles 9 1/4” Side-Cutting Pliers w/Dipped Handles 9 1/4” Side-Cutting Pliers w/Crimp, Fish Tape Puller, & Dipped Handles 8 in. High-Leverage Diagonal Cutting Pliers w/SmartGrip Handles 8 in. High-Leverage Diagonal Cutting Pliers w/Angled Head & SmartGrip Handles 8 in. High-Leverage Diagonal Cutting Pliers w/Dipped Handles 8 in. High-Leverage Diagonal Cutting Pliers w/Angled Head & Dipped Handles 35-3052, 35-052 0251-08M, 0251-07M, 0251-06M, 0251-05M Diagonal Cutting Pliers - Effectively cuts most hardened wire, ACSR, bolts, screws & nails. - Exceeds ASME/ANSI specs. - Rugged riveted construction for precise action. 0351-08M, 0351-07M, 0351-06M Long Nose/Side Cutters - Diamond serrated jaws & hardened cutting edges for cutting & gripping. - Through-hardened steel for long life. High-Leverage Side-Cutting Pliers 9” High Leverage Side-cutting Pliers 8” High-Leverage Diagonal Cutting Pliers 8” High-Leverage Diagonal Cutting Pliers 7” Diagonal Cutting Pliers 6” Diagonal Cutting Pliers 5” Mini Long Nose & Side Cutting Pliers 8” Long Nose & Side Cutting Pliers 7” Long Nose & Side Cutting Pliers 6” Pump Pliers 12” Molded Grip Pump Pliers 10” Molded Grip Major Credit Cards Accepted Surge “Awarded Best of the Test by Field & Stream magazine “ is a multi-tool built with tough new pliers, longer blades and easy to use locks. A unique blade exchange comes with saw and diamond wood file blades. Large and small bit drivers include double ended bits. And 4 outside opening blades give you quick access to the tools you use most. With these new features, plus the strongest scissors yet, Surge is sure to make a splash at the work site. 0451-12M, 0451-10M Pump Pliers - Riveted process ensures joint integrity. - Right-angled teeth for gripping in both directions. - Exceeds ASME/ANSI specs. $30.35 $28.35 $25.95 $16.70 $18.25 $17.30 $25.10 $18.25 $18.25 $24.75 $20.05 - Leather Sheath Included - Protected by a 25-Year Warranty Features: - Needlenose Pliers - Regular Pliers - Wire Cutters - Hand Wire Cutters - Stranded Wire Cutters - Electrical Crimper 830158 - Clip point Knife - Serrated Knife - Blade ex-changer - Scissors - Large Bit Driver - Small Bit Driver - 5/16” ScrewDriver - Awl with Thread Loop - Ruler (9 in. / 22 cm) - Bottle / Can Opener - Wire Stripper - Lanyard Ring Surge Extra Large Multitool 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $89.85 95 Multi-Tools Skeletool Full Size Multitool Features: Pliers, Hard-wire cutters, Tungsten coating, Serrated Blade, Universal Bit Driver, Carabiner opener, Removable clip, Storage in handle. 830850 830016 830023 830030 Kick Full Size Multitool Features: Needle-nose & Regular pliers, Wire cutters, Clip point knife, Large, Small, & Phillips screwdriver, Ruler, Bottle/can opener, & Wire Stripper. Fuse Full Size Multitool Features: Pliers, Wire cutters, Clip point knife, Large, Small, & Phillips Screwdriver, Scissors, Bottle/can opener, Wire Stripper, & Lanyard ring. Skeletool CX Full Size Multitool Kick Full Size Multitool Fuse Full Size Multitool Blast Full Size Multitool $68.00 $29.50 $39.11 $49.45 Charge TTi Multitool The Charge AL and ALX were just too hard to beat, so we didn’t even try, we simply combine them. The Charge TTi features a cutting hook, scissors, bit drivers, crimpers and more. But we had to give the TTi its own claim to fame. That’s where the handles and the S30V steel clip point knife come in. Grab a hold of one today and you’ll quickly see why the Charge models are the best of our Multi Tools. - Titanium Handles - Needle nose Pliers - Regular Pliers - Wire Cutters - Hand Wire Cutters - Crimper - S30V Clip point Knife - Serrated Knife 830682 Blast Full Size Multitool Features: Pliers, Hard-wire cutters, Clip-point knife, Wood/metal file, Saw, Scissors, Large, Small, & Phillips screwdriver, Bottle/Can opener, & Wire stripper. Charge TTI Multitool 830037 68010101K JUICE CS4 JUICE XE6 JUICE S2 JUICE C2 $129.85 Crunch Full Size Multitool Features: Locking pliers, Wire cutters, Hand wire cutters, Serrated knife, Wood/metal file, Small screwdriver, Medium screwdriver, Large screwdriver, Hex bit driver, Ruler, Bottle opener, & Wire stripper. Wave Full Size Multitool Crunch Full Size Multitool Juice Cs4 Multitool Juice Xe6 Multitool Features: Needle Nose Pliers, Features: Pliers, Straight Regular Pliers, Straight Knife, knife, Wire cutters, ExtraSaw, Wire Cutters, Hard-wire Cut- small, Large, & Phillips ters, Extra-small Screw Driver, screwdriver, Bottle/can Med/Lrg Screw Driver, Phillips opener, Lanyard Ring, Saw, Screw Driver, Bottle/Can Opener, Hard-wire cutters, Small Lanyard Ring, Awl, Scissors, screwdriver, Diamond Cork-screw, Cork-screw Assist coated file, Wood/metal file, Awl, Scissors, Cork-screw, & Cork-screw assist. - Ruler (8 in. / 19 cm) - Bottle / Can Opener - Wire Stripper - 8 Double-ended bits - Fixed Lanyard Ring - Quick-release Lanyard Ring - Pocket Clip (add on) - Cutting Hook - Saw - Wood / Metal File - Diamond-coated File - Scissors - Large Bit Driver - Small Bit Driver - Larger Screw driver Wave Full Size Multitool Features: Pliers, Wire cutters, Hand wire cutters, Clip-point knife, Serrated knife, Wood/metal file, Diamond file, Large bit driver, Small bit driver, Saw, & Wire stripper. $79.85 $88.35 Juice S2 Multitool Features: Needle-nose pliers, Regular pliers, Straight knife, Wire cutters, Extra-small screwdriver, Large screwdriver, Phillips screwdriver, Bottle/can opener, Lanyard ring, Hard-wire cutters, Small screwdriver, & scissors. Juice C2 Multitool Features: Needle-nose pliers, Regular pliers, Straight knife, Wire cutters, Extra-small screwdriver, Large screwdriver, Phillips screwdriver, Bottle/can opener, Lanyard ring, Hand-wire cutters, Small screwdriver, Cork-screw, & Cork screw assist. Juice Cs4 Multitool Juice Xe6 Multitool Juice S2 Multitool Juice C2 Multitool $66.35 $81.25 $52.50 $52.50 Powerplay Multitools 30 TOOLS PT-540 Powerplay PT-540 Multitool Features: Pliers, 110/66 PDT, UTP & wire stripper, Ex-large Cutters, Drywall punch & saw, Hard wire cutter notch, 24-18 & 18-14 AWG lug crimpers, 7 wire strippers, wire hook & spudger, #4 & #6 slotted & #1 Phillips screwdriver, SOG knife, 3-in-1 file/ bottle opener, 7/16 & 3/8” nutdrivers, ruler & lanyard. Powerplay 30 Tool Multitool $124.95 24 TOOLS PT-525 Powerplay PT-525 Multitool Features: Needle-nose & gripping pliers, 110/66 punchdown tools, romex wire cutter, UTP stripper, Drywall punch & saw, #4 & #6 screwdriver, #1 Phillips screwdriver, 1/4” square drive hex bit adapter, SOG serrated knife, 6 wire strippers, 3-in-1 file, Wire hook & spudger, Bottle opener, & Ruler Powerplay 23 Tool Multitool PowerBlade Multi Purpose Knife $88.25 .150-.250” cable strippers 12 Tools-in-One! Electrician’s knife and 11 separate strippers for wire and cable. Features patent pending wire and cable stripping system. - SOG® Beveled-Edge Knife - Thumb Stud for One-Handed Opening - Liner Lock Blade Release - Comfort Grips - .150” - .250” Cable Strippers - 22-10 AWG Wire Strippers - UTP Stripper - Limited Lifetime Warranty 6575 96 Datacomtools.com TM Powerblade Multitool Knife 22-10 AWG wire strippers - Cryogenic Heat Treated Blade Increases Strength to Enable Longer Sharpness and Chip Resistance - Manufactured from AUS 8 Stainless Steel - Lightweight Tool Handle Made from Military Grade Zytel Plastic - Liner Lock Blade Release System Keeps Knife Securely Locked While In-Use Position for Added Safety $58.95 PowerBlade Handle Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply Pro-Tool Bits Bit, D’VERSITBIT Bit-Spade-SF Corded Bit, Auger Bit, Naileater Bit, D’VERSIBIT 09-03-54A Bit, D’VERSITBIT .562” x .187” x 54” 12-04-54A Bit D’VERSITBIT .750” x .250’ x 54” 12-04-72A Bit, D’VERSIBIT .750 x .250 x 72” Bit-Spade-SF Corded 34A-1 Bit-Spade-SF Corded (1”) Pop 34A-1/2 Bit-Spade-SF Corded (1/2”) Pop 34A-3/4 Bit-Spade-SF Corded (3/4”) Pop 34A-3/8 Bit-Spade-SF Corded (3/8”) Pop 34A-5/8 Bit-Spade-SF Corded (5/8”) Pop 34A-7/8 Bit-Spade-SF Corded (7/8”) Pop 34AR-6 Bit-Spade-SF Corded (6pc Kit) Bit Auger 60A-1 Bit, Auger Quick Change (1A(POP) 60A-3/4 Bit, Auger Quick Change 3/2A (Pop) 60A-5/8 Bit, Auger, Quick Change 5/8A (Pop) 60A-7/8 Bit, Auger Quick Change 60A-7/8 63RT-1 Bit, Auger RT 1” 8-5/8” (Pop) 63RT-7/8 Bit, Auger RT 7/8” Bit, Naileater 62PTS-1 Bit, Naileater 1” x 7.62” 62PTS-3/4 Bit, Naileater 3/4” 62PTS-7/8 Bit, Naileater 7/8” 66RT-1 Bit, Naileater 1” x 18” 66PT-3/4 Bit, Naileater 3/4” x 18” Drill/Tap 39873 Drill, Pilot 39893 Drill-Pilot .250” x 3” 25LG 625-001 Drill, Packaged 645-001 Drill, Packaged 925-001 Drill PKG, small pilot-HSS DDKIT-1-68 Drill Driver Bit Kit (Pop) DTAP1/4-20 Drill/Tap 1/4-20 DTAP10-32 Drill/Tap, 10-32 DTAP6-32 Drill/Tap, 6-32 DTAP8-32 Drill/Tap, 8-32 DTAPKIT Drill-Tap Kit Holesaw, Variable Pitch $65.54 $68.64 $72.58 $6.09 $5.00 $5.54 $4.98 $5.28 $5.82 $21.50 $9.32 $4.24 $4.70 $8.11 $43.70 $38.12 $33.62 $25.97 $29.33 $45.92 $35.40 $5.06 $4.81 $4.99 $15.32 $7.49 $59.99 $8.04 $8.04 $8.04 $7.80 $27.75 Drill/Tap Cutters Extention Holesaws 825-1-1/8 825-1-3/4 825-1-3/8 825-2 825-2-1/2 825-3 825-3/4 825-3-5/8 825-4-1/2 825-4-1/8 825-7/8 35713 38504 38506 38507 Holesaw, Variable Pitch Holesaw, Variable Pitch Holesaw, Variable Pitch Holesaw, Variable Pitch Holesaw, Variable Pitch Holesaw, Variable Pitch Holesaw, Variable Pitch Holesaw, Variable Pitch Holesaw, Variable Pitch Holesaw, Variable Pitch Holesaw, Variable Pitch Holesaw, Light 6-3/8” Steel Tooth Arbor-Holesaw 3/8” Shank W/3 FLA Arbor, Holesaaw 1/2” Shank W/3 FLA Arbor, Holesaw-small $10.87 $14.05 $11.57 $14.05 $19.07 $19.69 $10.32 $21.90 $56.90 $29.98 $10.32 $63.10 $21.73 $26.14 $11.41 Cutters 625-1-1/8 625-1-3/8 625-7/8 635 645-011 645-1-1/8 925-1-1/8 925-7/8 930 Cutter Hole-CARBD 1.125” Cutter, Hole-CARBD 1.375” Cutter, Hole-CARBIDE .875” Cutter Kit, Hole-Carbide Arbor, Carbide Cutter Shank Cutter, Carbide 1-1/8” Cutter PKG, HSS 1.125” Cutter PKG, HSS 0.875” Cutter Kit, HSS $28.99 $33.99 $24.99 $2750.00 $73.86 $52.58 $26.81 $24.65 $15.80 Extension Bit 901-12 902-18 904H-12 904H-18 941 DBITKIT Extension, Bit Extension, Bit-Power Extension Bit (7/16” x 12”) Extension, Bit (7/16” x 18”) Quick Change D’VERSIBIT System K D’VERSIBIT Kit-Type “B” Auger $15.48 $33.36 $52.39 $52.39 $941.00 $88.50 Saw Blades LSC-M13C Blade, Metal Circ Saw 5-3/8” $42.00 Masonry Bit Kits SDS-SET-5 Masonry Bit Kit, SDS Plus $47.90 Hole Saws and Kits Can Light Hole Saw Electrician’s Step Bit Kit - Competitively priced - Drill not included - Cuts drywall & ceiling tile. - Self-Sharpening carbide coating blade. - Includes 2 shields to minimize cleaning. 35-598 Can Hole Saw 2 1/2”-7” $33.20 35-599 Can Hole Saw 6 1/4”-10 3/8” $27.85 Electrician’s Hole Saw Kit - Durable case securely protects bits. - Kit includes four step bits: (35-511, 35-513, 35-515, & 35-517) - Solutions for sizes between: 1/8” & 1 3/8”. 35-520 Electrician’s Step Bit Kit Major Credit Cards Accepted $162.35 - Generous 14-piece kit offers a tremendous selection. - Contains electrical sizes for pipe and conduit through 4”. - Plastic case survives extra wear & tear. 35-401 Includes: Hole Saw Sizes: 7/8”, 1 1/8”, 1 3/8”, 1 3/4”, 2”, 2 1/2”, 3”, 3 5/8”, 4 1/8”, 4 1/2” Arbor Models: 35-391, 35-394, 35-393 35-401 35-400 35-400 Includes: Hole Saw Sizes: 7/8”, 1 1/8”, 1 3/8”, 1 3/4”, 2”, 2 1/2” Arbor Models: 35-391, 35-393 Master Electrician’s Hole Saw Kit Electrician’s Hole Saw Kit 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $200.55 $94.25 97 Electrician’s Pivoting Drill/Driver This screwdriver can be used to drive a wide variety of screws and to drill small diameter holes. To fit a variety of situations, it can be used as a straight tool or as a pistol style tool. It has 21 clutch stages to precisely provide the right torque for almost any screw, and when the clutch setting is reached, the tool automatically shuts off to save battery and clutch life. Includes: - 3.6V Drill/Driver - (2) 3.6V Lithium-Ion Compact Batteries - 3.6V Battery Charger - 2 speed reversible: Low: 200 rpm - High: 600 rpm - Clutch torque: 2.7 to 25.7 in-lb 21 stages - Charging time: Usable: 15 minutes - Full: 30 minutes - Max drill diameter: In metal 13/64” - Max screw driving: Wood screws 5/32” dia x 1-1/2” - Powerful maximum torque: 39 in-lb - 13.3 in-lb - Anti-slip rubber grip to maintain a better grip LSD-36 Li-Ion Electrician’s Pivoting Drill/Driver The Greenlee circular saw is designed primarily to cut metal-almost any metal. This includes conduit, strut, and threaded rod. Plus the blade doesn’t leave burrs, so chasing threads or filing the edges isn’t needed. The full surround blade guard contains most of the chips, and with its compact size, it will work where larger saws can’t. It even has a LED work light so you can make straight cuts in dark locations Metal Cutting Circular Saw - High capacity battery: 14.4V Li-Ion - Rotating speed: 3,600 rpm - Blade size: Outer dia 5-3/8” - Arbor size: 20mm - Adjustable cutting depth up to 1-13/16” - Charging time: Usable: 35 minutes - Full: 50 minutes - Shaft lock for easy blade replacement - Electronic performance monitoring system - Electric brake stops the blade instantaneously LCS-144 Steel Stainless Steel Wood Aluminum Fiberglass & Plastic Metal Studs Drywall & Ceiling Tile Hardy & Cement Board Misc. Masonry Bits 98 Greenlee Products Combo Drill/Tap Bits Kwik Stepper Step Bits Bi-Metal Hole Saws Bi-Metal Hole Saws Ultra Cutter Twist Drill Bits Drill Saw Bits Quick Change Stainless Steel Hole Cutters Carbide-Tipped Hole Cutters Carbide-Tipped Hole Cutters Twist Drill Bits Nail Eater® RT Auger Bit Nail Eater® Extreme Auger Bit Kwik Stepper Step Bits Bi-Metal Hole Saws Bi-Metal Hole Saws Self-Feeding Spade Bits Recessed Light Hole Saws D’VersiBIT® System Stubby Auger Wood Bits Long Auger Wood Bits Twist Drill Bits Drill Saw Bits Installer Bits Combination Drill/Tap bits Kwik Stepper Step Bits Bi-Metal Hole Saws Bi-Metal Hole Saws Bi-Metal Hole Saws Bi-Metal Hole Saws Kwik Stepper Step Bits Carbide-Grit Hole Saws Twist Drill Bits Installer Bits Ultra Cutter Twist Drill Bits Installer Bits Self-Feeding Spade Bits Recessed Light Hole Saws Quick Cutter Hole Saws Twist Drill Bits Drilll Saw Bits Installer Bits Carbide-Grit Hole Saws Twist Drill Bits Installer Bits Glass/Tile Bits 1/4 SDS Bit 1/5” SDS Plus Bit Hex Drill Bit Datacomtools.com $179.00 TM Includes: - 14.4V Cutting Circular Saw w/LCS-M13C Metal Blade - 14.4V Lithium Compact Batteries - 14.4V-28.8V Battery Charger - Carrying Case Electrician’s Metal Cutting Circular Saw Size Range ALL 1/8” to 1-3/8” 9/16” to 7/8” 9/16” to 6” 7/8” to 2-1/2” 1/16” to 1/2” 1/8” to 1/2” 5//8” to 2” 3/4” to 1-1/2” 1-3/4” to 2-1/2” 1-3/4” to 1/2” 7/8” to 1” 5/8” to 1-1/4” 1/8” to 1-3/8” 9/16” to 7/8” 9/16” to 6” 3/8” to 1” 4-3/8” to 6-7/8” 3/16” to 1” 5/8” to 1” 11/16” to 15/16” 1/16” to 1/2” 1/8” to 1/2” 3/16” to 3/4” ALL 1/8” to 1-3/8” 9/16” to 7/8” 9/16” to 6” 9/16” to 7/8” 9/16” to 6” 1/8” to 1-3/8” 7/8” to 4-1/2” 1/16” to 1/2” 3/16” to 3/4” 7/8” to 2-1/2” 1/16” to 1/2” 3/16” to 3/4” 3/8” to 1” 4-3/8” to 6-7/8” 2-1/2” to 7” 1/16” to 1/2” 1/8” to 1/2” 3/16” to 3/4” 7/8” to 4-1/2” 1/16” to 1/2” 3/16” to 3/4” 1/8” to 1/2” 3/16” to 3/4” 5/32” to 3/4” 3/16” to 3/4” LSD-36 • $435.00 LDD-144 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • LDD-216 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • LHD-216 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply 1/2” Li-Ion Electrician’s Drill/Driver This drill/driver is easy to carry around & easy to fit into tight spaces. Yet, with its 14.4V Li-Ion battery, it has enough power to drive Greenlee’s top performing Self-Feeding Spade bits, up to 42 holes in 1-1/12” wood w/ 7/8” bit. It can be set to drive about any screw properly. Includes: - 14.4V Drill/Driver - (2) 14.4V Lithium-Ion Compact Batteries - 14.4V-28.8V Battery Charger - High Power: 390 in-lb - Variable speed/reversible: 60-400rpm - 200-1350rpm - Clutch torque: 4.4 to 39.0 in-lb, 18 stages - 1/2” Heavy-duty keyless chuck - Charging time: Usable 35 minutes - Full: 50 minute - Electronic trigger provides longer life - Electronic performance monitoring system LDD-144 LDS-144 1/2” Li-Ion Electrician’s Drill/Driver Additional products included with combo kit: - LCS-144 Metal Cutting Circular Saw - Heavy-Duty Multi-Pocket Bag 1/2” Li-Ion Electrician’s Drill/Driver with belt hook Combo Kit This drill/driver is a rugged workhorse of day after day heavy-duty drilling, yet at 5.4 pounds it is one of the lightest drills in its class. The high capacity 21.6V LI-ION battery delivers plenty of power to drill up to 139 holes 3/4” diameter in 1-1/2” wood. Features an 18 stage clutch so you can drive screws to the right torque. - High Power: 575in-lb - Variable speed/reversible: 100-400rpm - 350-1500 rpm - Clutch torque: 8.8 to 61 in-lb, 18 stages - 1/2” Heavy-duty keyless chuck - Charging time: Usable: 45 minutes - Full: 60 minutes - Electronic trigger provides longer life - 360º side handle for better leverage LDD-216 LHD-216 1/2” Rotary Hammer Drill/Driver Includes: - 21.6V Drill/Driver - (2) 21.6v Lithium-Ion Compact Batteries - 14.4V - 28.8V Battery Charger - Carrying Case 1/2” Li-Ion Electrician’s Drill/Driver 1/2” Li-Ion Electrician’s Hammer Drill/Driver $395.00 $427.95 With this one tool, you can do a complete concrete anchor installation. In the hammer mode, you can use a SDS masonry bit to drill the anchor hole. Then you can chance to the drilling mode and use the included bit adapter to drive the screw into the anchor. Plus the LRH-144 had 5 clutch settings so you can use just the right amount of torque for the screw. The 14.4V Li-Ion battery provides plenty of power to drill up to 12 holes of 1/2” diameter x 1-1/2” deep in concrete. - High capacity battery: 14.4V Li-Ion - Hammering Force: 21.6 kN - Blow rate per minute: 0-3,800 bpm - Speed at no-load: 01,000 rpm - Clutch torque: 13 to 48.7 in-lb - 3/4” SDS-plus bit system - Ergonomic soft rubber grip for stress reduction - Electronic performance monitoring system - Charging time: Usable: 35 minutes - Full: 50 minutes LRH-144 3/4” SDS-plus Rotary Hammer $295.00 $539.00 Includes: - 14.4V Rotary Hammer Drill/Driver - (2) 14.4V Lithium-Ion Compact Batteries - 14.4V-28.8V Battery Charger - Carrying Case - Shoulder Strap - Bit Adapter Electrician’s 1/2” SDS-plus Rotary Hammer Drill/Driver $530.00 This is one tough rotary hammer. With its magnesium gear case housing that provides excellent heat dispersal and its cooling fan diameter holes in concrete continuously. Also, the large cooling fan provides enough air flow to prevent tool-killing dust buildup, and the two-finger trigger is sealed to prevent dust entry. Use the Soft hammer selection for holes up to 3/16” diameter and the hard hammer selection for holes from 3/16” through 3/4” diameter. - High capacity battery: 28.8V Li-ion - Hammering force: 5,300 IbF - Two speed hammering selection: High: 0-4,500 bpm - Low: 0-2,800 bpm - Variable speed/reversible: 0-920rpm - 0-500rpm - 1” SDS-plus bit system - Electronic performance monitoring system - Charging time: Usable: 55 minutes - Full: 70 minutes. - Dust-proof switch ensures long life LRH-288 Major Credit Cards Accepted Includes: - 28.8V Rotary Hammer - (2) 28.8V Lithium-Ion Compact Batteries - 14.4V-28.8V Battery Charger - Carrying Case - Shoulder Strap Electrician’s 3/4” SDS-plus Rotary Hammer 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com $775.00 99 Datacomtools.com The Web’s Best Source for Telecom Tools and Testers 79 Harborview Avenue, Stamford CT 06902 The Right Tool for the Job. The Right Battery for the Tool LITHIUM-ION POWER TOOLS Electrician trusted for nearly 150 years, Greenlee is proud to introduce its new line of top-performing Lithium-Ion power tools. Professional, versatile and lightweight, these tools are the perfect companion to our industry leading holemaking and power tool accessory products. With this winning combination you will achieve optimum performance on the job, day in and day out. When it comes to making holes on the jobsite, electrical contractors reach for Greenlee’s power tool accessories to get the job done – whether it be our Nail Eater® Auger Bits, Drill/Tap Bits, Kwik Stepper® Bits, Spade Bits, D’Versibit® System or our QuickChange Hole Saws. Now you can get optimum performance from our already highly-reputable holemaking and power tool accessories with Greenlee’s new line of battery power tools. These power tools are compact, lightweight and cordless, yet powerful, heavy-duty and ergonomically-designed for working in tight spaces like panel boxes. Our power tools are powered by second-generation Cobalt Lithium-Ion batteries, which provide lower internal resistance than traditional Lithium-Ion batteries and store more amp hours than most of the competitors’ batteries – meaning more work can be done with one charge. So now is the time to get your hands on Greenlee! Choose from our 3.6V screwdriver; 14.4V drill/driver, circular saw or rotary hammer drill/driver; 21.6V drill/ driver and hammer drill/driver; or the very strong 28.8V heavy-duty rotary hammer. Each tool is powered with the proper voltage to meet the tool’s requirements, which gives electrical contractors the right amount of power and flexibility for just about any jobsite application. 3.6v Lithium-Ion LSD-36 LDD-144 LDS-144 LDD-216 LHD-216 LRH-144 LRH-288 LSD-36 LCS-144 14.4v Lithium-Ion LDD-144 21.6v 14.4v 28.8v LDD-216 LRH-144 LRH-288 Lithium-Ion 1/2” Li-Ion Electrician’s Drill/Driver with belt hook Combo Kit 1/2” Li-Ion Electrician’s Drill/Driver 1/2” Li-Ion Electrician’s Hammer Drill/Driver Electrician’s 1/2” SDS-plus Rotary Hammer Drill/Driver Electrician’s 3/4” SDS-plus Rotary Hammer Li-Ion Electrician’s Pivoting Drill/Driver Electrician’s Metal Cutting Circular Saw $295.00 $539.00 $395.00 $427.95 $530.00 $775.00 $179.00 $435.00 Lithium-Ion Lithium-Ion Bits and adapters for PROVL Powertools are available Visit www.datacomtools.com/provl for details. Visit WWW.DATACOMTOOLS.COM/PROVL