Download NEXO Nemo-User Guide

NEXO
NeMo User Guide v1.4
> 5 kHz
>–2 dB and < 2 dB
Low pass if FLAT, high-shelf otherwise
> 5 kHz
-
High-shelf
-
-
Peaking
You can also tap on [+] in the band list to add one. Its type will be
peaking.
Editing a band
1. Select one or several channels. The bands that are common to the
channels’ EQ are editable (a circle with a number inside is displayed).
2. To edit a band that is not common to the selected channels, tap on
[xxx bands in common]. This button becomes [yyy bands in total].
Same selection as above, but here all the bands are displayed.
3. Drag the circle of the band you want to edit to change its frequency
and gain.
4. Tap on the circle so the band is selected (the circle is filled). Pinch
your finger to change its Q or its slope.
5. When editing frequency, gain and Q, you can lock the frequency
and/or the gain by tapping on [ freq] and/or [ gain].
6. You can also edit frequency, gain, Q and slope from the bands list, by
either dragging your finger over a text field (the resolution increases
with the distance from your finger to the text field).
7. To change the type of a band, tap and hold your finger on the circle of
the band to display a contextual menu. You can also display this menu
from the band list by tapping on the preview icon and the small
triangle.
Page 28 of 54