Download UE-9000 Universal Encoder Platform USER MANUAL

User Manual
Unit Menu
8.5.3.
Drop Entry Menu (front-panel)
The Drop Entry menu allows the user to delete existing entries – meaning
trap-hosts – from the Traps Destinations list.
To access the Traps Destination List menu, in the front panel select RootÆ
ConfigurationÆUnitÆSNMP TrapsÆDrop Entry (see the following example).
1
2
8.5.3.1.
Drop Entry
Select Entry To Drop
Drop
New Host
Select Entry to Drop
The Select Entry To Drop parameter displays a select value screen with the
complete Traps Destinations list, allowing the user to select the entry-to-drop.
To set the Select Entry To Drop parameter, in the front panel select
RootÆConfigurationÆUnitÆSNMP TrapsÆDrop EntryÆSelect Entry To
Drop (see the following example).
Select Entry To Drop
Remote_Control
02{ New Host
01€
8.5.3.2.
Drop Entry
The Drop Entry option allows the user to delete the selected entry from the
Traps Destinations list. The entry-to-drop is selected by the Select Entry To
drop parameter (see the previous section). This option executes the Drop Entry
command, not leading to a new screen.
To
execute
the
Add
Entry
option,
in
the
front
panel
select
RootÆConfigurationÆUnitÆSNMP TrapsÆAdd EntryÆAdd Entry.
Page 8-34
(Rev. 4.0/ SW v2.1/ April 2007)