Download pneumatIc systems

XMax Standard Attachments and Dissection Tool Assembly
Straight Attachments
SHORT
SHORT
5 cm Short Attachment
MEDIUM
8 cm Medium Attachment
LONG
11 cm Long Attachment
MIA16
16 cm Minimally Invasive Attachment
SHORT-HD
5 cm Heavy Duty Short Attachment
MEDIUM-HD
8 cm Heavy Duty Medium Attachment
LONG-HD
12.4 cm Heavy Duty Long Attachment
XL-HD20.2 cm Heavy Duty Extra Long
Attachment
MEDIUM
LONG
MIA16
SHORT-HD
MEDIUM-HD
XM
Assembly for handpieces with
and
.
LONG-HD
Distal end of handpiece or attachment is pointed away
from user.
XL-HD
1. Move handpiece knurled knob to “RUN” ( ) position.
2. Slide attachment over distal end of handpiece. Pull
attachment towards handpiece, and rotate attachment
to right approximately one quarter turn until fully seated.
Handpiece knurled knob moves up to seat next
to attachment.
3. Pull handpiece knurled knob towards “LOAD” ( )
position and insert dissection tool into distal end of
attachment. Rotate dissection tool slowly until
fully seated.
4. Release handpiece knurled knob into “RUN” ( ) position.
Note: Handpiece is now fully functional.
5. Pull dissection tool to ensure proper engagement.
6. Attachment and dissection tool are secure.
Disassembly
1. Move handpiece knurled knob to “SAFE” position.
2. Remove dissection tool from distal end of attachment.
3. Rotate attachment to left approximately one quarter turn,
and remove from distal end of handpiece.
Anspach Pneumatic Systems User’s Manual DePuy Synthes Power Tools 11