Download VPFlowScope (dP) Manual

Display feedback
Display status description
Icon
Sensor module is connected
Sensor module is not connected.
Recording mode
Out of range of the specification
!
Service required
Flow direction
Flow direction is an extra feature for the VPFlowScope (thermal sensor only). The flow direction is visible in the
display.
3
•
The backwards flow is shown with a minus before the amount, e.g. -347 m n/hr.
•
In the totalizer: by adding and retracting flow depending on the flow direction.
Power failure and your data logging
When there is a power failure, the VPFlowScope continues data logging after re-stating the power. The data after
the power failure will be stored in a separate DAQ session.
VPFlowScope® User Manual
Rev 16 Aug 2011
21