Download nvr user manual
Transcript
2 Open-package check and cable connections 2.1 Open-package check When you receive the NVR, please check first First, please check whether there is any visible damage to the package appearance.he protective materials used for the package of the NVR can protect most accidental clashes during transportation. Then, please open the box and get rid off the plastic protective materials. Check whether there is any visible damage to the NVR appearance. At last, please open the machine crust and check the data wire in the front panel, power wire, the connection between the fan power and the main board. 1.Front panel and rear panel The key function specification in the front panel and the interface specification in the real panel are in the specification. Please check the product type in the front panel whether is accordant with the product type you order. The label in the real panel is very important for the after service. Please protect it carefully. When you contact us for after service, please provide the product type and serial number in the label. 2.Check After open the cover,you should check if it has obvious damage trace,also please check the front panel data cable,power cord and motherboard's connection are loose or not. 2.2 Hard disk installation For the first use,please install the hard disk,this machine box can install one hard disk(no limited capacity). ①disassemble the screw ②disassemble the cover 3 ③fix the screw of hard disk