Download \0CDCDj`

Denway
l.Key panel description
Content
Battery: 3V (2pcs), 1.5V AAA
Key
Page
i
®@@H
\ CD Ci) 011
1.
1
2 ..' Specifications
2
3.
Remarks function
2
4.
Program
3
(3
4.1 Date & time
G
4.4 Change password
9
\\0
0CDCDj'
CD
/
I
G)/
,--:,0,-,'
"=
~I
@8~
~'~
,",!
'111
Remote Contral
Function
C9
RING
.,.,
Report time or program /time & dateI.
Choose ring type or program ring volume.
UNLOCK6 Program IUnlock timeI.
0-9
Digits
.4
SERVICE
Program ISERVICE function/.
4.2 SERVICE button
5
EXTRA
4.3 Card
7
Program cards together with IREG-I and
IDEL+1 buttons
CLEAR
Cancei the wrong number.
EXIT
Back to the top menu or out of program.
REG-
Register cards or reduce ring volume.
DEL+
Cancei cards or increase ring volume.
ENTER
Confirm button
4.5 Unlock time
l::)
1,;/
Key panel description
TIME
9
4.6 Ring type
10
4.7 Ring volume
10
4.8 Buttons configure
11
!
User Manual
FN
~
Function button
A All programs are available only after get
in the system.
Geffri'the~~steffi
1.Press [FN] +password(4 bits) +[ENTER]
2.The door station will sound a long beep and the
[DOOROPEN] LEO will flash slowly.
3. If enter a wrong number, the door station will say
"sorry, wrong number. Please try again".Please
~ [Note: the original password is
-,
.chanqed.]
11234/. ltcan be
Angle: ";;30'
3.Remarks function
• The door station will sound accordingly if you
press any button on the remote contro/. In case
there is no any response, please check if the
batteries are workable or if the ring volume is at
lowest leve/.
• Press [FN] button the [OOOR OPEN] LED will
flash. In 7s you have to enter the correct pass­
word, otherwise the system will return to the
stand-by status. On program status if you keep
doing nothing in 120s, the system will return to
the stand-by status automatically.
• The b,uttons on thedoor station are not werkable r
while programming.
•
• If keep pressing [EXI1] button, the system will
',1
paqe up until out of program.
• If enter wrong number, please press [CLEAR]
I
button to cancel the wrong one.
'
I
-2­
e.g. 2: For allowing the service people to enter in
07:30 sharp, please press [SERVICE] button,
l!Ii ON/OFF
1.Press [SERVICE] + [ENTER]
4~ f:6~il~-~ftim~~
2.lf the door station says "ON", the function is open.
1.Press [TIME] +[yy-mm-dd hh/mm] + [ENTER]
·3.lf it says "OFF", the function is e1ose. To switch between
or Press [TIME] +[hh/mm/ss] + [ENTER]
2.The door station will sound a long beep and the
ßl I
I Ii!l
~
07:30:00
07:30:59
11 Service time
1.Press [SERVICE] + Ihh:mm/ + Ihh:mml + [ENTER]
2.The door station will sound a long beep, and the
3.1f the door station says "sorry, wrong number,
please try again".Then please repeatthe step1.
[Note: 1.The system adopts 24 hours model.
2.0nce finish the program you
107301 keys and then [ENTER] button.
on and OFF, please just push [ENTER] button.
or Press [TIME] +[hh/mm] + [ENTER]
[DOOR OPEN] LEO will flash slowly.
repeat the step1.
Available distance: ";;3 meters
- 1­
. Version: 1.1
4.Program
may push
[TIME]+[ENTER] button to check the
result. ]
[DOOROPEN] LED will flash slowly.
e.g. 3: For allowing the service people to enter any
time except 7:30 to 9:30, please push [SER­
VICE] button, 1093007301 keys, then [ENTER]
3.lf the door station says "Sorry, wrong number. Please
button.
try again", it means the program faile_d. Then please
L
repeat the step1.
liil
im
mJ
7:30
e.g. 1: For allowing the service people to enter between
7:30 to 9:30, please push [SERVICE] button, then
e.g.:if the time is 18:15 i,!! Oct. 25,2008~please
press [TIME] button then enter 108102518151
and confirm by [ENTER] button, If the date
1073009301keys and [ENTER] button continuously.
1mI1
WJ
7:30
_@
mI
9:30
is correct, you just need to enter 118151 .
-3­
-4­
\
2.Specifications
-5­
-6­
WJ
9:30
I
--
v
•
i!!l Register single card
-,
mRegister contlnuous cards
1.Press [REG-]+[EXTRAJ.+1st card number(8bits)
+ card quantity + [ENTER]
or Press [REG-] + swipe the card +card quantity
+ [ENTER]
2.The door station will sound a long beep. And the
[DOOROPEN] LED will start to flash siowly.
3. If ihe door station says :'SOrTy, wrong number.
Please tryaqain", that means the program failed ,
then please repeat the step1.
3 .lnput "Distributor(3bits)" + "Port nuniber(1 bits)"
e
,
Press
8
tIi;;\
\.:51
FN
Press
4.1f the door station sounds a long beep,that means
Input
" the programis successfut.whlle the [DOOROPEN]
try aqa in" . that means the program Iailed .then
e
Press
o
Input
please repeat the step2 arid step3.
A
'G9 door station [caU] buttons are not fixed
to distributors' ports. So program to match
right number again. '
:
l
, ~
, ['
G
. .
.... OOOR
•
Flash
.
[DOOROPENj LED w ill start to fla sh s!owl y.
[Note] there ar e 4 volume levels as optlon s,
- 10­
\
~ ;-\,
Sound a short beep
~
Sou nd a
long beep
~
~5B~SP+~"'S~d:
number
1.Press [RING]+ [REG -] 1 [DEL +] + [ENTER ]
2.The door station will soud a loog beep . And the
quickly
CPCPQCD+e'" 0:] ;-\'
Liill
~~@.~-h;,;~~~
OPEN
1101J ~ ...
Por t
number
=
-~
-:-~=
" .:~(-;.:
.,.,..,-.:'~
i).' ~"';,.' :;'';:::i-fu
~ '4- :~T'.
~?~
.... .-.;(~~~
001
number
long beep
,call buttons is required.
-11 ­
rneans the prog ram fall and you nee d to input the
I
I
1=m ut e.
-9­
+. ~
,-E"
Di s tributor
number
LED wi'u still flashing quickly.The program for another
, buttons is available by repeating steil 2 an d step3.
1.Press [UNLOCK] + Number (1 -10) + [ENTER]
2.The door sta tion will soun d a leng beep. An d the
[OOOR OPEN] LED wili start 10 flash siow ly.
3.lf the door station says "Sorry, wrong number. Please
try again".That means you entered an exceeded
number and need to repeat the step1.
-8­
+[ENTER]
5.lf the door station says"sorry,wrong nurnber, please
3.!f th e nurnb er is exceed, the door station will say
"sorry, wrong number. Plea se try again". That .
[Notes] There are4 optional rings. You mayincre- .
ase 0,;- decrease ring volume yourself with
2.T he doo r sta tion w ii: sound .a ,lang beep , Arid the
[DOOR OPEN] LED will start to flash slowly.
3.1n case you entered a wrong password, the LED
w ili keep flashing qu ickl y. At this moment, you
may enter the right password and push [ENTER]
butlon.
'
2.Press [CALL] button on the door station,system w ill
sound a short be ep.
t.Press [RI NG] + Number (1-4) + [EN TE R]
2.The door station will sound a long beep. And the
[DOOR OPEN] LED will start to fla sh slowly.
[DEL+] and rREG-] buttons.
Exampie: 2 3 1 3 D - C 1x2 door station, D istributor
,quickly.
try aga in".That mean s you repeat diffe re nt nu rnber
and need to repeat the step l . '
iI1 Delete all cards
1. Press [DEL]+[EXTRA] +system password+[ENTERj
-7­
, 1.Press[FN]+[REG-], [DOOROPEN] LED w ill flash
~
1.Press [FN] + new passwo rd (4 bits) + repeat new
password + [ENTER]
2.The door stat ion will sound a long beep. And the
[DOOR OPE N] LED wili start to flash slowly,
3. !f the door station says "Sorry, w rong num ber. Please
numbe r+[ENTER] or sWi!Jing the ca rd.You ca n
also press [EXIl] button to quit the program.
3. If the door station says "SOrTy, wrong nurnber.
Piease try again", that rneans the prog ram failed ,
then pleaserepeat th e step1.
try again", that means the program failed ,then please
-_ t;,
Delete singlecards
1.Press [DEL +] +card number(8 olts)+ [ENTER]
or Press [DEL +] + swipe the card+[ENTE R]
2.The door station will sound a long beep. But the
[DOOR OPEN] LED w ill still flashing quickly.So
youcan delete another ca rd by entering the card
1.Press [REG-] +' card number(8 bits)+[ENTER]
or Press [REG-]+swipe the card+[ENTER]
2 .The door station wiil sound a long beep . But the
[DOOROPEN] LED will still fla shing qu ickiy.So you
can reg ister another car d byenterinq the card nu­
mber+[ENTER] or swiping the card.You can also
push [EXIT] buttert to qu it the proqrarn,
3.lf the door station says "SOrTy, wrong number. Please
repeat the step 1.
, ~ .-
- 12­
.__. -
'-'--... ..
"- ~ "
-
- . -'-- -
--' ­