Download CircuitMaker 2000

None
Loads the netlist without displaying any nets (the default setting).
View details of errors
Displays a netlist report that you
can use to help resolve any errors
contained in the netlist (see Figure
6.4)
Figure 6.4. Using the Netlist report, you can determine
what if any problems there are in your netlist.
Making a Netlist
TraxMaker’s Make Netlist command actually creates a netlist
based on the connections of the current board. This
command is most useful for updating an existing netlist after
you’ve loaded and made changes to it. Or you can use the
Make Netlist command to generate a netlist in a different
format for use in other PCB layout or netlist checking tools.
TraxMaker can make netlists in the following formats:
Professional Edition
6-8
Chapter 6: Nets and Netlists
•
•
•
•
•
•
•
•
TraxMaker
Protel®
Tango®
OrCAD® PCB II
PADS PCB®
Cadnetix®
Calay®
Calay90®
(Professional Edition)
(Professional Edition)
(Professional Edition)
(Professional Edition)
(Professional Edition)