Download Integrated Network Interface Card User`s Manual

Cannot Ping But Associated and Authenticated
Cannot Ping But Associated and Authenticated
If static IP is being used, a gateway value must be set and pping (2
packets every 2 minutes) is set to enable.
NOTE: A/Ps are RF devices that route IP traffic to RF clients; A/Ps
do not conduct IP traffic with clients. PPING forms the IP
path and arp cache entry in switch or device A/P.
Can Ping the Device but Cannot Print
1. Check to see if assigned to right VLAN or IP method, or if DNS
name is required.
2. Send a test job using FTP, LPR, etc., to isolate the problem
and determine whether it is the print queue or printer.
Wireless Device Setup Example
Edit the example script below for your site. Send the script to a
printer's interface in ASCII mode.
Example: >copy/b filename.ext lpt1:
All ethernet commands are listed in the PrintNet User manual.
---- remove this header before sending to the printer ---!PTR_SETUP
NIC_SETUP
store tcpip 2 opts -rarp -bootp -dhcp
store tcpip 2 addr 10.10.10.10
store tcpip 2 mask 255.255.255.0
store tcpip route add default2 10.10.10.1 2
store tcpip tcp rxwin 4096
store tcpip tcp opts -keepalive
store ifc 2 wlan profile 6
store ifc 2 wlan opts -intnl
store ifc 2 wlan defkey disable
261