Download Chapter 1 System Configuration & Installation

Contents
User's Manual for BK108 V2.0
Contents
Chapter 1 System Configuration & Installation
1. System Configuration & Remarks
p5
2. Features of the PS680AM Control System
p5
3. Installation and Debugging of Computer Control System
p6
Chapter 2 Specifications of the Button-Pressed Operations
1. Figure of Keyboard of the Operation Panel (See the figure below)
p9
2. Explanation of the Functional Keys
p10
3. Explanation of the Parameter Setting button
p11
4. Cursor Key
p11
5.Operation Mode Selection Key
p12
6. Electrothermal ON/OFF key and Motor ON/OFF key
p12
7. Emergency Reset Key
p12
8. Manual Operation Keys
p13
9. Setting Scope of Numeric Items
p15
Chapter 3: Descriptions on setting parameters/functions
1. The main control panel shown while turning on
p16
2 Setting for mould close information
p20
3. Set mould opening information
p21
4. Set the plastic injecting information
p22
5. Set the pressure retaining information
p23
6. Set plastic melting/drawing/cooling information
p24
7. Set the stuff auto-clearing up information
p25
8. Set the table information
p26
9. Set the mould adjusting information
p27
10. Set the ejecting forward information
p28
11. Set loose core information
p29
12. Set the air blow information
p30
13. Set time/count information
p31
R
3