Download CHAPTER 1. System Management

2600-00FK28GAB
Ver. 3.0
CHAPTER 2. WLAN Management
2.2.2
PSK authentication failure
Symptoms
When a wireless station attempts to connect to a Wi-Fi network configured for PSK
authentication, (re)association is performed normally but there is an error with PSK
authentication. In this case, (re)association information of the wireless station can be
checked in the following way.
The information can be checked executing a CLI command in the following way.
WEC8500# show station summary
The information can be checked using the Web UI in the following way.
1)
2)
On the top menu, click Monitor.
On the left menu, click Stations.
Figure 4. Web UI-PSK authentication failure
Possible Causes

Wi-Fi network authentication settings of the wireless station are incorrect.

WLAN security settings of the APC are incorrect.
© SAMSUNG Electronics Co., Ltd.
page 51 of 92