1
Download ZW-CE1@T Confocal Fiber Type Displacement Sensor User`s Manual
Transcript
Performing Thickness Scaling Performing Thickness Scaling p.92 Operating procedure Steps Key operation 1 to 5 For moving to "SCALE", see steps 1 to 5 in p.314. 6 Display Description Select "THICK" as the scaling type. The current setting value is displayed on the sub-display. Press / key to enter editing mode and the sub-display blinks. Select "THICK" and press the key. 7 The current measured value is displayed on the main display and the current setting value is displayed on the sub-display. Press key to enter the editing mode, and the sub-display blinks. To edit numerical values, use the / / Enter the setting value and then press the 8 9 "OK/CAN" is displayed on the sub-display. Press the key to execute scaling or Press the / keys. key. key to cancel. key for two seconds to enter the RUN mode. Sensor controller operations 9 ZW User's Manual Setting the Output Conditions 317
