Download Manual

GETTING READY TO SEW
Changing the presser foot
Attention:
Turn power switch to off ("O") when carrying out any of the below
operations!
Attaching the presser foot holder
Raise the presser foot bar (a).
Attach the presser foot holder (b) as illustrated.
a
b
Attaching the presser foot
Lower the presser foot holder (b) until the cut-out (c) is directly
above the pin (d).
Press the black lever (e).
Lower the presser foot holder (b) and the presser foot (f) will
engage automatically.
e
c
d
d
f
Removing the presser foot
Raise the presser foot.
Press the black lever (e) and the foot will disengages.
e
g
18
Attaching the edge/quilting guide
Attach the edge/quilting guide (g) in the slot as illustrated. Adjust
according to need for hems, pleats, etc.