Download SELF-PROPELLED PLATFORM STAR 8

Transcript
CORRECTIVE MAINTENANCE SHEET
Sheet 1/1
SHEET C143
REPLACING THE BOTTOM PANEL MANIPULATOR
Caution!
Do not use the machine
during maintenance operations.
1 - Preliminary operations
• Put the machine in the maintenance configuration (see relevant section).
• Switch off the electric power supply (see relevant section).
2 - Removing the manipulator (2)
• Remove the closing plate (1) by taking out the four fixing screws.
• Mark and disconnect the electric connections of the manipulator.
• Remove the manipulator by taking out its fixing screws.
3 - Reinstalling the manipulator
• Fix a manipulator equipped with new seals on the turntable control panel.
• Reconnect the electric connections according to the marks made during
dismantling.
• Put the closing plate back into place and secure with the four fixing
screws.
• Put the machine back into the operational configuration.
• Make several up and down movements from the turntable control panel to
test manipulator operation.
1
2