Download Manual - Gefen

V
V
R03,1.5V
R03,1.5V
Information
In order for the IR remote control to function properly, both the Matrix
Controller and the IR remote control must be set to the same IR channel.
R03,1.5V
Setting the IR Channel
R03,1.5V
In order for the included IR remote control to communicate with the Matrix Controller, the IR
remote control must be set to the same channel as the matrix. See Setting the IR Channel
for the Matrix Controller (page 127) for more information.
Channel 0 (default):
Channel 1:
ON
ON
1 2
1 2
DIP1 = OFF
DIP2 = OFF
DIP1 = ON
DIP2 = OFF
Channel 2:
Channel 3:
ON
ON
1 2
1 2
+
_
R03,1.5V
R03,1.5V
Getting Started
Introduction
DIP1 = OFF
DIP2 = ON
_
+
ON
1 2
DIP switches
page | 8
DIP1 = ON
DIP2 = ON