Download Codan Military Catalog

Vehicle Antennas
9350M Accessories
9350M ACCESSORIES
PRODUCT
9350M Accessories
PART NO.
DESCRIPTION
08-05140-001 9350 Spring
Strain relief for 9350 Fibreglass Whip.
78-23007-003 9350 Fibreglass Whip, 1.6 m
This is the primary whip normally supplied with the 9350. It is a
copper wire encased in a polyurethane covered fibreglass rod. The
whip is designed to withstand substantial flexing and rugged
conditions. It operates over the transmit frequency range of
2–30 MHz.
NOTE:
Must be used with the spring (part number 08-05140-001).
78-23025
9350 Tapered Stainless Steel Whip, 1.2 m
This whip is designed as an emergency backup to the primary whip
(part number 78-23007-003) in case of damage. It is only suitable
for operation over a transmit frequency range of 2.5–30 MHz and is
less efficient than the primary whip.
NOTE:
Can be used without the spring (part number 08-05140-001).
78-23056
9350 Tapered Stainless Steel Whip, 1.65 m
The longer length of this whip enables use over the transmit
frequency range of 2–30 MHz. It is less efficient than the fibreglass
whip (part number 78-23007-003).
15-00323
NVIS Kit
Suits the 9350 Automatic Tuning Whip Antenna for improved short
range (0–500 km) near vertical incidence skywave communications
over frequency range 2–12 MHz.
Includes: two piece whip antenna, angle adaptor, extension riser,
tie down cord kit and fitting instructions in a canvas bag
08-05627-006 Cable, 9350M to NGT Control, 6 m
08-01503-006 Cable, Coaxial Assembly RG58, 6 m
Military HF Radio International Product Catalogue
September, Issue 1
Page 33