Download Product Manual - Bushnell Golf

®
Model#: 368350
User
Manual
Lit #: 98-1957/10-10
Bushnell Yardage Pro XGC+
Page Title
Table of Contents
Page #
Welcome
2
Important Info / Our Website
3
iGolf.com Registration
4
Package Contents / System Requirements
5
Controls / Display
6
Battery Information
7
Control Functions / Start Up
8
Main Menu
9
Using the Play Golf Page
10-11
Play Golf Page-Extra Features
12-13
Play Golf Menu
14-15
Mapping Golf Holes
16-17
The Handicap Page
18
The More Apps Page
19-20
The More Apps Page (Settings)
21-22
How to Custom Map Courses/Ranges
23-26
FCC Statement
27
Warranty
28
1
Introduction
Bushnell Yardage Pro XGC+
Welcome
Dear Valued Consumer:
Congratulations on your purchase of the Bushnell Yardage Pro XGC+. We sincerely hope
you will find your Bushnell product both enjoyable and easy to use. Knowing the exact
distance for each shot will assist you in lowering your score and enhance your overall
golfing experience.
This User Manual was created for you to get the most out of your new device and
assist with the initial setup. It only takes a few minutes to read, after which you can
immediately begin using your new Yardage Pro XGC+ and enjoying its many features.
Thank you for choosing Bushnell.
2
Bushnell Yardage Pro XGC+
Introduction
Important Information
Legal Disclaimer
By using this product, you agree that Bushnell Outdoor Products will not be held legally
responsible for any injury or damage to you or any person or property caused by the
user’s improper operation and/or poor judgment while using this product.
Note: See Limited Warranty for other limitations to our liability.
Additional Information
The Global Positioning System (GPS), a network of 32 satellites orbiting Earth, is operated
and maintained by the U.S. government. This GPS device requires at least 3 satellites to
be acquired to accurately determine your position. Any change made to the system by
the government could affect the accuracy and performance of this product.
Our Website: www.bushnellgolf.com
Bushnell Golf GPS Website
www.bushnellgolf.com is an online
resource for all our Golf GPS product
owners, including product support,
FAQs, and instruction manuals.
3
Introduction
Bushnell Yardage Pro XGC+
iGolf.com Registration
Within 45 days of purchase, go to iGolf.com to register yourXGC+, which will update the
preloaded GPS course data and load any new courses that have been recently added to
the iGolf database. Registration is free and will only take a few minutes.
If a unit that has not been registered is powered on 45 days or more after the first GPS
fix, it will not function and display a prompt to register online (which will restore it to
normal operation).
1. Using the provided cable, connect one end to the mini USB port on the front of
your XGC+ and attach the other end to a USB port on your computer. The display
will indicate “USB Mode” and your computer will recognize it as a standard USB
mass storage device (no driver is required).
2. Go to http://www.igolf.com, select ‘Join Now’, enter the requested information
and select the ‘Join Now’ button to continue. Create your iGolf.com profile and
select the ‘Save’ button. While on the My Profile page, select the ‘Sync Device’
button to register your XGC+.
Once your XGC+ has been registered, you may update the GPS data for an existing course
or download a new course to it at anytime*. First make sure your XGC+ is connected to
the computer and that you are logged in to your iGolf.com account. Then, simply repeat
these steps to update existing courses or download other courses to your XGC+.
1. Select ‘GPS Courses’ from the header menu, enter the name of a golf course in
the search bar, and select the ‘Search’ button.
2. Select the desired course from the results list to access the course download
page.
3. Select ‘Download GPS & Scorecard’ to download the selected course files to
your XGC+.
* Renewal fees may apply after the initial membership period expires.
Please refer to the iGolf.com website for details.
4
Bushnell Yardage Pro XGC+
Introduction
Package Contents / Computer Requirements
Package Contents
1 - Bushnell Yardage Pro XGC+
1 - USB Sync Cable
1 - AC/DC 5V Adapter
1 - Belt Clip
1- Carrying Pouch
1 - Quick Start Guide
Computer Requirements
USB (1.1 or 2.0) Port
OS: Windows 7/Vista/XP, or Mac OSX
Windows is a registered trademark of Microsoft Corporation in the United States
and other countries.
Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
5
Introduction
Bushnell Yardage Pro XGC+
Bushnell Yardage Pro XGC+ Controls/Display
USB Connection
Hole Number
Par
Distance to the Back
Distance to the Center
Distance to the Front
Shot Distance Feature
Go to Score Screen
Go to Map Screen
Function Buttons
Up/Down/Left/Right Buttons
(Toggle Pad)
Menu Button
Power Button
Enter Button
6
Bushnell Yardage Pro XGC+
Introduction
Battery Information
Battery Information
This product contains an internal rechargeable lithium-ion battery. Under normal
operating conditions, a new battery will last 14 -16 hours on a full charge. However,
battery life may be reduced due to a variety of factors (external temperature, etc). All
rechargeable batteries lose their effective charge length over time.
The internal battery can be charged by connecting the included USB cable to the device
and a computer. Alternatively, the battery can be charged by connecting the USB cable
to the device and using the included adapter to plug the charger into a standard 110V
wall outlet. If the battery is new or has been totally drained, allow six to eight hours for
a full charge. The display will read “Battery Charging Completed” when the unit is fully
charged.
WARNING
• Keep battery cover closed at all times. Risk of explosion if battery is replaced with
incorrect type.
• Do not attempt to open, disassemble or service the battery. Battery must be replaced
by qualified technician.
• Do not crush, puncture or short external contacts. Do not expose to temperatures
above 140o F (60o C).
• Properly recycle or dispose of battery. Do not dispose in fire or water.
Product Updates
Please check www.bushnellgolf.com for the latest product updates and information.
7
Introduction
Bushnell Yardage Pro XGC+
Control Functions / Start-Up
Control Functions
PWR Button
• Turns the device on and off
MENU Button
• Launches Play Menu (in Play Golf mode)
Left Function Button
• Returns to previous screen (Back)
• View Map (in Play Golf mode)
Right Function Button
• Selects item or Saves setting
• View Score (in Play Golf mode)
Left/Right Buttons (toggle pad)
• Moves between fields
• View next or previous hole
Up/Down Buttons (toggle pad)
• Scrolls up/down
Left Function button
• Switches between screens
Power button
Enter Button (toggle pad center)
• Selects highlighted option
Enter button
• Activates Shot Distance
Start-Up
Right Function button
Menu button
Toggle Pad buttons (Up/Down/Left/Right)
Power On: press and release the PWR button. The welcome screen will appear, followed
by the Main Menu (see next page).
Power Off: Press and hold the PWR button until the screen goes blank. The unit will
automatically shut off after 45 minutes have elapsed without user input (no
buttons pressed). This can be changed by entering the “More Apps” menu, selecting
“Settings”, then “Device Settings”, then setting Auto Off to “OFF”.
8
Bushnell Yardage Pro XGC+
Operation
Main Menu
Main Menu
The Main Menu displays the three Pages available to the user, which are explained in
detail in subsequent sections of this User Manual. To begin using the device, scroll to
highlight any Page name using the Up or Down toggle pad buttons and press the Enter
button. The Pages are:
Battery Level
GPS Signal
Play Golf-you’ll no doubt spend the majority of your time
on the course here, viewing the distance to the center,
front and back of each green, using the scorecard feature,
maybe even mapping a custom point.
icon
icon
Handicap-check the “Handicap Tracker” screen anytime to
see your average score and putts, total rounds played and
details for each game.
More Apps-access a wide range of features, from checking
battery level or satellite signal strength to personalizing
your XGC+ with your name and preferred settings.
The Bushnell XGC+ Golf GPS is preloaded with over 16,000 golf courses and is ready to
use out of the box without downloading any additional software. After you’ve had a
chance to get familiar with the features and functions of the XGC+, please be sure go to
iGolf.com within 45 days and set up your free user account. This will let you make sure
the internally stored GPS data includes any newly added courses, as well as allowing you
to download color maps for your favorite courses, and provides access to all the features
and benefits iGolf.com has to offer.
9
Operation
Bushnell Yardage Pro XGC+
Using the Play Golf Page
1.
2.
With PLAY GOLF highlighted, press the Enter button (center of the toggle pad).
If you are outdoors on or near the golf course with a clear view of the sky, the
display should indicate “Searching For Local Courses”. If it does not, and you see this
message: “Not enough satellites to find local courses. Wait for signal strength to improve or press
NEXT to perform a manual search”, see Note A on the next page. When the search is
complete, a list of golf courses in order of their distance from your current location
is displayed (Fig. 1). Select the course you want from the list and press Enter. If it is
not listed, see Note B on the next page.
Once you have selected your course, you’ll see the “SELECT TEE BOX” screen, with
the available choices dependent on the course you are playing (Fig. 2). Highlight
the tee box you will use, and press Enter. The display will show you distances from
your current location to the front, center and back of the green for the first hole of
the course (Fig. 3). Press Up or Down (toggle pad) to display the distance to other
points. The XGC+ will automatically advance to the next hole as you move around
the course, but you can manually select a different hole than the current one at
any time by pressing the Right (next) or Left (previous) toggle pad buttons.
Fig. 1
10
Fig. 2
Fig. 3
Bushnell Yardage Pro XGC+
Operation
Using the Play Golf Page
Note A: If you are indoors, or don’t have a strong enough satellite signal outdoors, you
may see this message when you enter the PLAY GOLF page: “Not enough satellites to find
local courses. Wait for signal strength to improve or press NEXT to perform a manual search.” If you have
just turned on the unit, the signal may improve after a minute or two. If you don’t want
to wait, press the Right Function button to select NEXT and enter the state and course
name as described in Note B.
Note B: A manual search option is also available. If no courses are found, or the course
you want to play is not listed*, select “Manual Search” (Fig. 4) using the Up button on the
toggle pad and press Enter, then:
Enter the first letter of the state (Fig. 5) (use the toggle pad buttons to highlight a
letter, press Enter, repeat). Highlight the state on the resulting list and press Enter
(Fig. 6).
Next, enter the course name (Fig. 7) and press the Right Function button to start
the Search. You should then be able to select the course from the search results
list of matching courses in your state. Note: it’s often only necessary to enter the first
letter or two of the state and course, then let the search function take it from there.
Fig. 4
Fig. 5
Fig.6
Fig. 7
*as new courses are added to the iGolf.com database, you can
log in to your active member account and download them.
11
Operation
Bushnell Yardage Pro XGC+
Play Golf Page-Extra Features
CONTROL FUNCTIONS (Play Golf Page)
Right/Left buttons (toggle pad).........Next/Previous Hole
Up/Down buttons (toggle pad).........Select Standard or Custom Points distance screens
Left/Right Function buttons...............Move between Standard, Map and Score screens
Enter button (toggle pad).....................Activate Shot Distance feature
SHOT DISTANCE FEATURE
This feature allows you to easily check the distance
between any two points and would normally be used to
measure the length of your shot. To use it, start from the
standard PLAY GOLF screen (with MAP, SHOT and SCORE
at the bottom of the display), then:
• Press Enter to activate the Shot Distance feature.
The distance will automatically update as you
move.
• Press Enter again to disable the Shot Distance
feature.
• Press Enter a third time to reactivate the Shot
Distance feature and establish a new start position.
HOLE MAP*
Press the Left Function button to view the Map screen (see next page) . Your current
location is displayed, allowing you to move the cursor anywhere on the screen to find the
distance from you to that point, and from that point to the center of the green. The map
will automatically zoom in as you move closer to the green-or you can manually zoom in
by pressing the Enter button.
* Note: color maps for courses are not preloaded.
Please register your XGC+ at iGolf.com to access map downloads.
12
Bushnell Yardage Pro XGC+
Operation
Play Golf Page-Extra Features
Auto Zoom In
SCORECARD FEATURE
Press the Right Function button to view the Score screen. This
feature allows you to input your score and putts for each hole
played. The hole number, par and handicap are also displayed
on this screen for reference. Use the Up/Down buttons to
move between the SCORE and PUTTS fields. Use the Left/Right
buttons to select the number.
Press the Right Function button to SAVE the score when you’ve
finished. This information will be used on the Score Summary
screen which is found in the Play Menu.
13
Operation
Bushnell Yardage Pro XGC+
Play Golf Menu
PLAY MENU
From any Play Golf screen, press MENU to access the Play
Menu. This menu allows you to easily monitor a variety of
information or modify settings for the unit, or related to the
current golf course. Select a menu item by highlighting it
using the Up/Down buttons, then press Enter. Press the
Left Function button to go back to your previous Play Golf
screen. The Play Menu items and their functions are:
14
•
Score Summary
•
Course Info
•
Map Golf Hole
Displays hole by hole summary and overall total of
your scores. This info is linked to the Scorecard Feature,
and depends on your input there. Use the Left/Right
buttons to scroll back and forth between holes.
Displays general information about the course being played.
Allows you to map the points for the current hole being played without having to
exit the game. See USING “MAP GOLF HOLE” in the next section for details.
Bushnell Yardage Pro XGC+
Operation
Play Golf Menu
•
Battery Level
•
Satellites
•
•
•
Displays a horizontal bar representing the power
remaining in the battery.
Displays icons representing satellites being tracked
and indicates GPS signal strength.
Select Tee Box
Determines which information will be used to calculate
your handicap as well as the PAR and Handicap as
shown on the Score Summary screen.
Yards or Meters
Selects the displayed unit of measurement.
Exit Game
Returns to Main Menu.
15
Operation
Bushnell Yardage Pro XGC+
Map Golf Hole
USING “MAP GOLF HOLE”
To correct or update the actual location of the Front, Center or Back of a hole, or to set
up custom points for any object on or near the green:
1. Enter the Play Menu, select “MAP GOLF HOLE” and press Enter.
2. On the Choose Point screen (Fig. 8), if the point you want to map is listed (for
example, “CENTER”), select it and press Enter (skip to Step 4).
3. If you don’t need to “remap” the location of an existing point, but want to create
a new (custom) point instead, scroll down to CUSTOM 1 and press Enter (skip to
Step 5).
4. Follow the directions on the Register Point screen (Fig. 9). You must be physically
standing at the point you are mapping. Press the Right Function button to Register
(mark and save) the updated location for the point (Fig. 10).
5. If you select one of the custom points from the “Choose Point” list and press Enter,
you’ll see the “Add Custom Point” screen with 3 options (Fig. 11).
Fig. 8
Fig. 9
Fig. 10
Fig. 11
* Note: if you need to map an entire new course or a driving range, use the MAP function
on the More Apps page. See “How to Custom Map Courses/Ranges” for details.
16
Bushnell Yardage Pro XGC+
Operation
Map Golf Hole
6.
7.
8.
9.
To use one of the provided abbreviations and symbols to label your custom point,
highlight ABBREVIATIONS and press Enter. Highlight the icon/abbreviation from
the list (Fig. 12) and press Enter to select it.
If you would rather create a name or abbreviation for the custom point yourself,
highlight NAME CUSTOM POINT and use the toggle pad buttons to select
characters, pressing Enter after each one (Fig. 13). To delete a character, select
“BKSPC” and press Enter. When finished, press the Right Function button to
Register (save) the name.
Follow the directions on the Register Point-Custom screen (Fig. 14). You must be
physically standing at the point you are mapping. Press the Right Function button
to Register (mark and save) the updated location for the point.
If you need to remap one of your custom points (change its location) after you
have registered it, but want to keep its abbreviation or name, first highlight it on
the Choose Point screen and press Enter. Then highlight REGISTER (Fig. 15), press
Enter, stand at the revised location and press the Right Function button to save
it.
Fig. 12
Fig. 13
Fig. 14
Fig. 15
* Note: if you need to map an entire new course or a driving range, use the MAP function
on the More Apps page. See “How to Custom Map Courses/Ranges” for details.
17
Operation
Bushnell Yardage Pro XGC+
Handicap Tracker
TRACKING YOUR HANDICAP
The Handicap page allows you to quickly view your overall, cumulative golf game stats.
Any scores kept on your XGC+ will be synced with your member account data when you
log on to iGolf.com, to keep your handicap up to date. To view the Handicap screen,
highlight “Handicap” on the Main Menu screen and press Enter.
Note: If you are on one of the Play Golf page screens, you’ll first need to press the
MENU button to view the Play Golf menu, then highlight EXIT GAME (the menu “wraps
around”, so you can press Up to quickly go to EXIT GAME instead of scrolling through
the entire list), and press Enter to return to the Main Menu. Now you can highlight
“Handicap” and press Enter.
The Handicap (Fig. 16) screen displays these personal
statistics:
• Handicap
• Rounds Played
• Average Score
• Average Putts
Press the Right Function
button to see your “per game”
overview (score history)
(Fig. 17).
Fig. 16
Fig. 17
18
Bushnell Yardage Pro XGC+
Operation
The More Apps Page
USING THE MORE APPS PAGE
The More Apps page gives you access to a wide variety of options that let you set user
preferences, monitor the status of your XGC+, look up course related reviews and news,
and even map all the points on an existing or new golf course (or driving range) “from
scratch”. To view the More Apps page, highlight “More Apps” on the Main Menu screen
and press Enter.
Note: If you are on one of the Play Golf page screens, you’ll
first need to press the MENU button to view the Play Golf
menu, then highlight EXIT GAME (the menu “wraps around”,
so you can press Up to quickly go to EXIT GAME instead of
scrolling through the entire list), and press Enter to return
to the Main Menu. Now you can highlight “More Apps” and
press Enter.
The More Apps page (Fig. 18) items and their functions are:
• Reviews
Fig. 18
This feature allows you to read reviews on your XGC+
that may be downloaded from iGolf.com when you log in to your account with the
unit connected. Highlight “Reviews” and press Enter. Use the toggle pad buttons
and the Enter key to select different categories (Golf Equipment, Golf Courses,
Gadgets, Travel) and read related reviews.
• News
This feature allows the user to read news and opinions articles on your XGC+ that
may be downloaded from iGolf.com when you log in to your account with the unit
connected. Highlight “News” and press Enter. Use the toggle pad buttons and the
Enter key to select a News category (News, Opinions) to read.
19
Operation
Bushnell Yardage Pro XGC+
The “More Apps” Page
• Satellites
Displays the location and number of satellites and the strength of the satellite
signal.
• Map
This feature allows you to input the name of a course (or driving range) and map
GPS data points for it, creating your own complete set of custom data. Existing
course files stored on your XGC+ may be totally customized, or new files can be
created “from scratch” as you play a new course that’s not yet available in the
iGolf database. See the “How to Custom Map Courses/Ranges” pages for details on
using the Map feature.
• Range
After mapping your local driving range, select Range to get distances to the
mapped points.
• Clock
Displays the current time-see Settings>Set Time.
• Battery
Displays the level of battery power as a percentage.
• User
View the owner’s name and phone number here, as set under “Set Owner Info”
in the Device Settings submenu (see next page). The serial number of your unit is
shown in the last slot.
20
Bushnell Yardage Pro XGC+
Operation
The “More Apps” Page (Settings)
• Settings
This is a submenu within More Apps, which allows you to set your own info and
preferences, affecting many of the unit’s other displays and functions. The items
within the Settings submenu are:
Battery Level
Duplicates the “Battery” function on the More Apps page.
Satellites
Duplicates the “Satellites” function on the More Apps page.
Device SettingsUsed to set a wide range of preferences. Press Enter then scroll to select an
option, then press Enter again. The Device Setting options are:
• Contrast(1-9): sets display contrast to aid viewing in various light
conditions.
• WAAS (On/Off ): normally left “On” to improve GPS accuracy. WAAS is a
system of satellites and ground stations which provides GPS locational
signal corrections for much of the U.S.
• Stabilizer (On/Off ): lets you set the rate at which the XGC+ refreshes
its GPS position. When set to the default “On”, the unit wil not refresh
its GPS distance readings when you stop moving. This helps keep the
distances from appearing to fluctuate while the XGC+ is stationary.
• Clock (12/24 Hr): selects your preference for displayed time.
• Daylight Savings (On/Off ): selects your preference for displayed time.
• Auto Off (On/Off ) -the XGC+ power will automatically turn off after 45
minutes has passed with no buttons pressed, unless this is set to Off.
• Auto Advance (On/Off ): the unit automatically switches to the next
hole as you approach it (in Play Golf mode), unless this is set to Off.
• Auto Zoom (On/Off ): the unit automatically zooms in on color maps of
the green as you get closer to the hole, unless this is set to Off.
21
Operation
Bushnell Yardage Pro XGC+
The “More Apps” Page (Settings)
• Power Save (On/Off ): normally set to Off, an “On” setting will allow the
unit to turn off the display backlight after 45 seconds of inactivity (no
buttons pressed), to conserve battery power. The GPS signal remains
active. Press any button to turn the backlight on again.
• Yards or Meters (Yards/Meters): selects your preference for all displayed
distances.
Delete File
This allows you to remove a custom mapped golf course or driving range
only. Preloaded courses cannot be deleted. Select “Delete Course” or “Delete
Range”, then highlight the name of the custom mapped course or range you
want to delete and press Enter, then confirm by selecting “YES” and pressing
the Right Function button.
Set Owner Info
Allows you to enter your name and phone number to personalize your XGC+
which may help someone return it to you if lost or misplaced. Press Enter,
select NAME, press Enter, select characters (toggle pad) and SAVE (Right
Function button). Repeat for PHONE NUMBER.
Set Time
Setting your time zone will ensure your XGC+ displays the correct local time.
Press Enter, then select your Region and Time Zone.
Default Settings
Select this and press Enter if you want to restore all of the device settings to
their original state as set at the factory. You’ll see a Warning screen asking if
you’re sure. If so, select “YES” by pressing the Right Function button.
About
Displays the operating software version (e.g. “v2.1”).
22
Bushnell Yardage Pro XGC+
Operation
How to Custom Map Courses/Ranges
As noted earlier, using the “Map” function on the More Apps page
allows you to map custom data points for a new or existing golf
course or driving range. The Map function has many “menu within
menu” screens, so an overview of its structure is provided below. As
you begin to use this function, you’ll most likely find the screens and
options to be simple to understand and use. Start by highlighting
“Map” on the More Apps page, then press Enter. You’ll now see the
MAP POINTS screen, with two primary options (Course or Range).
From there, here are your options and how/when to use them (press
Enter after selecting an option unless directed otherwise):
1. GOLF COURSE-select this to set points for a new or stored
golf course. You’ll see the MAP COURSE screen (Fig. 20) with these
options:
EDIT COURSE-select this to customize an existing course
(already stored on the XGC+). You’ll see a list of nearby courses
to choose from (select & Enter), then the MAPPING MENU
screen (Fig. 21) with these options:
• COURSE NAME-select characters if desired (you might
add your initials to the existing name so it’s easy to find
your custom file later), then press Right Function to
Save it.
• COURSE DATA-select the Hole, press Enter, then use
the toggle pad buttons to select and change (press
Enter) the PAR and HCP data for a Tee Box on that Hole.
When finished customizing the data, press the Right
Function button to SAVE it.
• MAP GPS POINTS-select the Hole, press Enter, then
Fig. 19
Fig. 20
Fig. 21
23
Operation
Bushnell Yardage Pro XGC+
How to Custom Map Courses/Ranges
select the point on the green you want to map, go
to it and stand still, then press Right Function to
REGISTER it (Fig. 22). When you’ve finished mapping
points on any hole, be sure to press the Right
Function button to SAVE your data as part of the
custom course file before exiting.
CREATE COURSE-select this option (from MAP>GOLF COURSE)
if you need to set points for a new course (one not available
in the iGolf database) (Fig. 23). Next, you’ll see a list (Fig.
24)-select a slot for the course, then spell the state it’s in (first
few letters). After that, you’ll see the MAPPING MENU screen
with these options (Fig. 21):
• COURSE NAME-select characters to spell the name
you want , then press Right Function to Save it.
• COURSE DATA-select the Hole, press Enter, then use
the toggle pad buttons to select and change (press
Enter) the PAR and HCP data for a Tee Box on that
Hole. When finished customizing the data, press the
Right Function button to SAVE it.
• MAP GPS POINTS-select the Hole, press Enter, then
select the point on the green you want to map, go
to it and stand still, then press Right Function to
REGISTER it. When you’ve finished mapping points
on any hole, be sure to press the Right Function
button to SAVE your data as part of the custom
course file.
If you want to change any of your marked points at a later time,
simply re-enter the “Golf Course” option under “Map” in More
24
Fig. 22
Fig. 23
Fig. 24
Bushnell Yardage Pro XGC+
Operation
How to Custom Map Courses/Ranges
Apps, and select the course’s name from the list, then go directly
to MAP GPS POINTS, select the point and re-map/re-register it. Be
sure to press the Right Function button to SAVE your revised
data as part of the custom course file before exiting.
2. DRIVING RANGE-select this to set points for a driving range
(or anywhere you go to practice). You’ll see the SELECT RANGE
screen:
Select “NEW DRIVING RANGE” and press Enter. You’ll see the
MAPPING MENU screen (Fig. 25) with these options:
• RANGE NAME-select characters to spell the name you
want to use for the range, then press Right Function
to Save it.
• MAP GPS POINTS-after selecting this item, you’ll see
a disclaimer screen -press Right Function for “OK”,
then highlight a “slot” for your point (Fig. 26)-when
the white flag is blinking, press Enter. Then, select a
flag color from the list (Fig. 27) (for example, you might
select different color flags corresponding to different
clubs in your bag if you’re trying to determine your best
distance with each). Next, you’ll see the Register Point
screen , which directs you to, “Go to point and stand
still. Select “Register” to map point”. Walk to the flag,
tree or whatever point you want to mark for future
reference, then press the Right Function button to
register (save) it as a point on your range.
Fig. 25
Fig. 26
Fig. 27
25
Operation
Bushnell Yardage Pro XGC+
How to Custom Map Courses/Ranges
If you want to change any of your marked points at a later time, simply re-enter the
“Driving Range” option under Map in More Apps, and select the range’s name from
the list, then go directly to MAP GPS POINTS, select the flag and re-map/re-register it.
Be sure to press the Right Function button to SAVE your revised data as part of the
custom course file before exiting.
26
Bushnell Yardage Pro XGC+
FCC Statement
FCC Compliance Statement
This device complies with Part 15 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE.
These limits are designed to provide reasonable protection against harmful interference in a residential installation,
and are more stringent than “outdoor” requirements.
Operation of this device is subject to the following conditions; (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
The device does not contain any user-serviceable parts. Repairs should only be made by an Authorized Bushnell
repair center. Unauthorized repairs or modifications could result in permanent damage to the equipment, and will
void your warranty and your authority to operate this device under Part 15 regulations.
The shielded interface cable which is provided must be used with the equipment in order to comply with the limits
for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
Specifications and designs are subject to change without any notice or obligation on the part of the manufacturer.
27
Warranty
Bushnell Yardage Pro XGC+
ONE Year LIMITED WARRANTY
Your Bushnell product is warranted to be free of defects in materials and workmanship for one year
after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair
or replace the product, provided that you return the product postage prepaid. This warranty does
not cover damages caused by misuse, improper handling, installation, or maintenance provided by
someone other than a Bushnell Authorized Service Department.
®
Any return made under this warranty must be accompanied by the items listed below:
1)
2)
3)
4) 5) A check/money order in the amount of $10.00 to cover the cost of postage and handling
Name and address for product return
An explanation of the defect
Proof of Date Purchased
Product should be well packed in a sturdy outside shipping carton, to prevent
damage in transit, with return postage prepaid to the address listed below:
IN U.S.A. Send To: Bushnell Outdoor Products
Attn.: Repairs
9200 Cody
Overland Park, Kansas 66214
IN CANADA Send To:
Bushnell Outdoor Products
Attn.: Repairs
25A East Pearce Street, Unit 1
Richmond Hill, Ontario L4B 2M9
For products purchased outside the United States or Canada please contact your local dealer for
applicable warranty information. In Europe you may also contact Bushnell at:
Bushnell Germany GmbH
European Service Centre
Mathias-Brüggen-Str. 80
D-50827 Köln
GERMANY
Tel: +49 221 995568-0
Fax: +49 221 995568-20
This warranty gives you specific legal rights.
You may have other rights which vary from country to country.
©2010 Bushnell Outdoor Products
28
®
Customer Service: (800) 423-3537
www.bushnellgolf.com
©2010 Bushnell Outdoor Products