Download User Manual

User Manual
4.2 AP One 300M
Front View
Rear Panel View
Connectors
USB
WAN
Reserved for future functionality.
10/100BaseT Ethernet connector, normally connected to a back haul
network.
10/100BaseT Power over Ethernet 802.3af connector, normally connected
to a back haul network.
WAN
Inset reset button. Depress with a pin and hold for at least five seconds to
restore factory defaults. For further details, please refer to Restoring
Factory Defaults.
Power Connector DC 12V power input for use with the supplied power adapter.
Reset
LED Indicators
Power
OFF – Power is off.
ON – Power is on.
Status
OFF – Unit is initializing.
ON – Unit is ready.
Wireless
OFF – Wireless is not ready.
On – Wireless is ready.
http://www.pepwave.com
9
Copyright © 7/16/13 Pepwave