Download Sonnox Restore QuickStartGuide-1-2
Transcript
4.2 Quick Start Guide 4 THE OXFORD DENOISER allows the noise reduction to be modified in smaller frequency bands. Listen to the audio signal, and bring down the grab handles on the yellow curve. Listen to the removal of noise in that band, and carefully balance against the preservation of the audio signal. 2. Now listen to the critical frequencies of the material to evaluate whether you could adjust the red threshold bias curve to be more sympathetic to these parts. This would mean slightly lowering the threshold bias handles in the critical regions of the frequency spectrum to reduce noise reduction there and preserve more of the original audio, and perhaps to lift the bias controls in the HF area to remove more hiss. 3. If you have a constant noise floor, try to find a segment with no signal and use Freeze mode. All the threshold profile and noise reduction biasing controls will help you modify the curves. 4. Surprisingly good results can be obtained quickly using a manually-shaped fixed curve. Select Manual mode. Use the Colour control to modify the noise profile at LF, perhaps by mimicking a pink noise curve. Use the Air control to modify the noise profile at HF, which can help preserve HF signal frequencies. The noise profile can be further shaped in smaller frequency bands by using the bias curve handles. www.sonnox.com 16 Go to contents