Download DVR Server User Manual

DVR Server Manual
`
In the course of the instant playback, you can press Space key to switch
the play/pause status or direction key → and ← to play next and previous
frame.
If you want to stop the instant playback, you can Single-Right-Click the
play backing window, and select End playback.
While instant playback is in processing, if you want to play it again, you
can select Review playback function. You can press Space key to switch the
play/pause status or direction. In pause status, you can press key → and ←
to play next and previous frame. when the screen plays, you can press ↑and
↓to control the speed of playing, also, in play status you can press → and ←
to play in normal speed and play it again.
3. Alarm popup
Single-Right-Click video image area in main interface and select “Start
alarm popup” after you set “Alarm camera popup interval” in system setup,
otherwise, it can’t be selected with gray. After that when there has a motion
detection alarm (set in PTZ & Linkage setup and Motion detection setup) or an
alarm triggered by sensor (set in Sensor setup), system will display alarm
cameras in sequence. But this function does not include IP camera, even IP
camera have alarms, there images will not pop up. When you want to end this
function, you can Single-Right-Click video image area and select “Pause alarm
popup”.
4. OSD Adjustment
Single-Right-Click video image area in main interface and select “OSD
Adjustment” to adjust the position of OSD (IP Camera does not have this
function; you can set the OSD position in IP Camera setup remotely).
14