Download VXA-220
Transcript
CONTROLS & CONNECTORS (SIDE PANEL) c PTT (Push To Talk) Switch Press this button to transmit when you are operating in the COM band. Release this button to return to the “Receive” mode. See page 14 for details. 2) Do not allow the VXA-220 to become submerged in water while the rubber cap over the EXT DC jack is removed. d MONITOR Switch This button may be pressed to “open” the squelch manually, allowing you to listen for very weak signals. Press and hold this button for 2 seconds to “open” the squelch continuously. Press this button again to resume normal (quiet) monitoring. See page 17 for details. e POWER Switch Press and hold this button for 3 seconds to toggle the transceiver’s power on and off. f EXT DC Jack When an external 12-Volt DC power source is available, you may connect the (optional) E-DC-5B External DC Cable here. 1) Do not connect any wire to this jack if that wire is connected directly to a 28-Volt DC source. Connecting the VXA-220 directly to a source which exceeds 15.0 Volts DC will result in damage to the unit, and this type of damage is not covered by the Limited warranty on this product. VXA-220 PRO VI OPERATING MANUAL c d e f 5