Download ENUK8T890 AM2
Transcript
K8T890 AM2 Setup Manual FCC Information and Copyright This equipment has been tes ted and found to comply with the limits of a Class B digital devic e, purs uant to Part 15 of the FCC Rules . T hese limits are designed to provide reasonable protec tion against harmful interference in a residential installation. T his equipment generates , uses and can radiate radio frequency energy and, if not ins talled and used in accordance with the instructions , may cause harmful interference to radio communications . There is no guarantee that interference will not occur in a particular ins tallation. The vendor makes no representations or warranties with respec t to the contents here and s pecially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make c hanges to the c ontents here without obligation to notify any party beforehand. D uplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing. The content of this user’s manual is subject to be c hanged without notice and we will not be res ponsible for any mis takes found in this user’s manual. All the brand and produc t names are trademarks of their respec tive companies . Table of Contents Chapter 1: Introduction ............................................. 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Before You Start................................................................... 1 Package Checklist................................................................ 1 Motherboard Features.......................................................... 2 Rear Panel Connectors (for Ver 6.x )....................................... 4 Rear Panel Connectors (for Ver 5.x)....................................... 4 Motherboard Layout (for Ver 6.x ).......................................... 5 Motherboard Layout (for Ver 5.x ).......................................... 6 Chapter 2: Hardware Installation.............................. 7 2.1 2.2 2.3 2.4 Installing Central Processing Unit (CPU) ................................ 7 FAN Headers........................................................................ 9 Installing System Memory.....................................................10 Connectors and Slots ............................................................12 Chapter 3: Headers & Jumpers Setup .....................14 3.1 3.2 How to Setup Jumpers..........................................................14 Detail Settings.....................................................................14 Chapter 4: RAID Functions.......................................20 4.1 4.2 4.3 Operation System................................................................20 Raid Arrays.........................................................................20 How RAID Works.................................................................20 Chapter 5: Useful Help .............................................22 5.1 5.2 5.3 5.4 Driver Installation Note .......................................................22 Award BIOS Beep Code........................................................23 Extra Information................................................................23 Troubleshooting...................................................................25 Chapter 6: WarpSpeeder™ .......................................26 6.1 6.2 6.3 6.4 Introduction........................................................................26 System Requirement............................................................26 Installation .........................................................................27 WarpSpeeder™....................................................................28 Appendencies: SPEC In Other Language ................34 German................................................................................................34 France..................................................................................................36 Italian..................................................................................................38 Spanish ................................................................................................40 Portuguese...........................................................................................42 Polish...................................................................................................44 Russian ................................................................................................46 Arabic..................................................................................................48 Japanese ..............................................................................................50 K8T890 A M2 CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU ST ART Thank you for choosing our product. Be fore you start installing the mothe rboard, please make sure you follow the instructions be low: Prepare a dry and stable work ing environment with sufficie nt lighting. Always disconne ct the compute r from powe r outle t be fore ope ration. Before you take the mothe rboard out from anti-static bag, ground yourse lf prope rly by touching any safe ly grounde d appliance, or use grounded wrist strap to remove the static charge. Avoid touching the compone nts on mothe rboard or the rear side of the board unless ne cessary. Hold the board on the edge , do not try to be nd or flex the board. 1.2 Do not leave any unfastene d small parts inside the case afte r installation. Loose parts will cause short circuits which may damage the equipment. Keep the compute r from dange rous a rea, such as hea t source , humid air and wate r. PACKAGE CHECKLIST HDD Cable X 1 Use r’s Manual X 1 Fully Se tup Drive r C D X 1 Rear I/O Panel for ATX Case X 1 Se rial ATA Cable X 1 FDD Cable X 1 (optional) Se rial ATA Powe r Cable X 1 (optional) USB 2.0 Cable X1 (optional) S/PDIF Cable X 1 (optional) Printe r Port Cable X 1 (optional) 1 Motherboard Manual 1.3 MOT HERBOARD FEAT URES Ver 5.x CPU FSB Chipset Ver 6.x Socket AM2 Socket AM2 AMD Sempron / Athlon 64 / Athlon 64 FX / AMD Sempron / Athlon 64 / Athlon 64 FX / Althlon 64 X2 processors Althlon 64 X2 processors AMD 64 Architecture enables 32 and 64 bit AMD 64 Architecture enables 32 and 64 bit computing computing Supports Hyper Transport and Cool=n=Quiet Supports Hyper Transport and Cool=n=Quiet Supports up to 1GHz Bandwidth Supports up to 1GHz Bandwidth K8T890 K8T890 VT8237A VT8237A ITE IT8726F-S ITE IT8726F-S Provides the most commonly used legacy Super Provides the most commonly used legacy Super Super I/O I/O functionality. I/O functionality. Low Pin Count Interface Low Pin Count Interface Environment Control initiatives, Environment Control initiatives, H/W Monitor H/W Monitor Fan Speed Controller Fan Speed Controller ITE's "Smart Guardian" function ITE's "Smart Guardian" function DIMM Slots x 2 DIMM Slots x 2 Each DIMM supports 256/512MB & 1GB DDR2 Each DIMM supports 256/512MB & 1GB DDR2 Main Memory IDE SATA LAN 2 Max Memory Capacity 2GB Max Memory Capacity 2GB Dual Channel Mode DDR2 memory module Dual Channel Mode DDR2 memory module Supports DDR2 400 / 533 / 667 / 800 Supports DDR2 400 / 533 / 667 / 800 Registered DIMM and ECC DIMM is not Registered DIMM and ECC DIMM is not supported supported Integrated IDE Controller Integrated IDE Controller Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode supports PIO Mode 0~4, supports PIO Mode 0~4, Integrated Serial ATA Controller Integrated Serial ATA Controller Data transfer rates up to 1.5 Gb/s. Data transfer rates up to 1.5 Gb/s. SATA Version 1.0 specification compliant. SATA Version 1.0 specification compliant. Realtek RTL8201CL Realtek RTL8201CL 10 / 100 Mb/s Auto-Negotiation 10 / 100 Mb/s Auto-Negotiation K8T890 A M2 Ver 5.x Sound Slots On Board Connector Ver 6.x ALC888 ALC861VD 7.1 channels audio out 5.1 channels audio out High Definition Audio High Definition Audio PCI slot x3 PCI slot x3 PCI Express x16 slot x1 PCI Express x16 slot x1 PCI Express x 1 slot x2 PCI Express x 1 slot x2 Floppy connector x1 Floppy connector x1 IDE Connector x2 IDE Connector x2 SATA Connector x2 SATA Connector x2 Front Panel Connector x1 Front Panel Connector x1 Front Audio Connector x1 Front Audio Connector x1 CD-in Connector x1 CD-in Connector x1 S/PDIF out connector x1 S/PDIF out connector x1 CPU Fan header x1 CPU Fan header x1 System Fan header x1 System Fan header x1 CMOS clear header x1 CMOS clear header x1 USB connector x2 USB connector x2 Printer Port connector x1 Printer Port connector x1 Chassis open header (optional) x1 Chassis open header (optional) x1 Power Connector (24pin) x1 Power Connector (24pin) x1 Power Connector (4pin) x1 Power Connector (4pin) x1 PS/2 Keyboard x1 PS/2 Keyboard x1 PS/2 Mouse x1 PS/2 Mouse x1 Back Panel Serial Port x1 Serial Port x1 I/O LAN port x1 LAN port x1 USB Port x4 USB Port x4 Audio Jack x6 Audio Jack x3 Board Size 195 mm(W) x 293 mm(L) Special Features 195 mm(W) x 293 mm(L) RAID 0 / 1 support RAID 0 / 1 support Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA OS Support Biostar Reserves the right to add or remove support for any OS With or without notice. Biostar Reserves the right to add or remove support for any OS With or without notice. 3 Motherboard Manual 1.4 REAR PANEL CONNECT ORS ( FOR V ER 6.X) PS/2 Mouse LAN Line In/ Surround Line Out Mic In 1/ Bass/ Center PS/2 Keyboard 1.5 USBX2 COM1 USBX2 REAR PANEL CONNECT ORS ( FOR V ER 5.X) PS/2 Mou se PS/2 Keyboard LAN COM1 USBX2 Center 4 Li ne In Rear Li ne Out Side Mic In USBX2 K8T890 A M2 1.6 MOT HERBOARD LAYOUT ( FOR V ER 6.X) JKBMS1 JUSBV1 DIMMB1 DIMMA1 A M2 FDD1 Socket JCOM1 JATXPWR3 JCFAN 1 JUSB1 IDE 1 IDE 2 JATXPWR2 JUSBLAN1 K8T890 JAUDIO2 JAUDIOF1 PCI-EX1_1 LAN BAT1 PC I-EX16 Codec PCI-EX1_2 JSATA2 VT 8237A JCDIN1 PCI1 JSATA1 BIOS JCI1 (Optional ) PCI2 SUPER I/O JCMOS1 PCI3 JSPDIF_OUT1 JPRNT1 JSFAN1 JUSBV2 JUSB2 JUSB3 JPANEL1 Not e: ■ repre sents the 1st pin. 5 Motherboard Manual 1.7 MOT HERBOARD LAYOUT ( FOR V ER 5.X) JKBMS1 JUSBV1 DIMMB1 DIMMA1 A M2 FDD1 Socket JCOM1 JATXPWR3 JCFAN 1 JUSB1 IDE 1 IDE 2 JATXPWR2 JUSBLAN1 K8T890 JAUDIO 1 JAUDIO F1 PCI-EX1_1 LAN BAT1 PC I-EX16 Codec PCI-EX1_2 JSATA2 VT 8237A JCDIN1 PCI1 JSATA1 BIOS JCI1 (Optional ) PCI2 SUPER I/O JCMOS1 PCI3 JSPDIF_OUT1 JPRNT1 JSFAN1 JUSBV2 JUSB2 JUSB3 JPANEL1 Not e: ■ repre sents the 1st pin. 6 K8T890 A M2 CHAPTER 2: HARDWARE INSTALLATION 2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU) Step 1: Remove the socket protection cap. Step 2: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. Step 3: Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation. 7 Motherboard Manual Step 4: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the JCFAN1. This completes the installation. 8 K8T890 A M2 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1. JCFAN1: CPU Fan Heade r 1 4 Pin 1 2 3 4 Assignment Ground +12V FAN RPM rate sense Smart Fan Control (By Fan) JSFAN1: System Fan He ader Pin 1 2 3 Assignment Ground +12V FAN RPM rate sense JSFAN1 3 1 Note: The JCFAN1 and JSFAN1 s upport 4-pin and 3-pin head connec tors. When c onnecti ng with wires onto c onnectors, please note that the red wire is the positi ve and s houl d be connected to pi n#2, and the bl ac k wire is Ground and s hould be c onnected to GND. 9 Motherboard Manual 2.3 INST ALLING SYST EM MEMORY DIMMA1 DIMMB1 A. DDR2 module 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. B. Memory Capacity 10 DIMM Socket Location DIMMA1 256MB/512MB/1024MB *1 DIMMB1 256MB/512MB/1024MB *1 DDR2 Module Total Memory Size Max memory 2GB. K8T890 A M2 C. Dual Channel Memory installation To trigger the Dual Channel function of the motherboard, the memory module must meet the following requirements: Install memory module of the same density in pairs, shown in the following table. DIMMA1 O DIMMB1 X Disabled X O Enabled O O Dual Channel Status Disabled (O means memory installed, X means memory not installed.) The DRAM bus width of the memory module must be the same (x8 or x16) 11 Motherboard Manual 2.4 CONNECT ORS AND SLOT S FDD1: Floppy Disk Conne ctor The motherboard prov ides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the prov ided f loppy drive ribbon cables. 34 33 2 1 IDE1/IDE2: Hard Disk Conne ctors The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality. The IDE connectors can connect a master and a slav e driv e, so y ou can connect up to four hard disk drives. The f irst hard drive should always be connected to IDE1. 40 39 2 1 IDE1 12 IDE2 K8T890 A M2 PCI-EX16: PCI-Express x16 Slot - PCI-Express 1.0a compliant. - Maximum theoretical realized bandwidth of 4GB/s simultaneously per direction, f or an aggregate of 8GB/s totally. PCI-EX1_1/PCI-EX1_2: PCI-Express x1 slots - PCI-Express 1.0a compliant. - Data transf er bandwidth up to 250MB/s per direction; 500MB/s in total. PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins. 2X bandwidth ov er the traditional PCI architecture. PCI-EX1_1 PCI-EX16 PCI-EX1_2 PCI1~PCI3: Pe riphe ral Component Interconne ct Slots This motherboard is equipped with 3 standard PCI slots. PCI stands f or Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits. PCI1 PCI2 PCI3 13 Motherboard Manual CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW T O SET UP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DET AIL SETT INGS JPANEL1: Front Panel Heade r This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep button and speaker connection. It allows user to connect the PC case’s f ront panel switch functions. SLP PWR_LED On/Off ++- 9 1 + SPK Pin 1 2 3 4 5 6 7 8 14 Assignment +5V N/A N/A Speaker HDD LED (+) HDD LED (-) Ground Reset control Functio n Speaker Connector Hard drive LED Reset button Pin 9 10 11 12 13 14 15 16 16 8 RST HLED Assignment Sleep control Ground N/A Power LED (+) Power LED (+) Power LED (-) Power button Ground Functio n Sleep button N/A Power LED Power-on button K8T890 A M2 JATXPWR1: ATX Powe r Source Conne ctor This connector allows user to connect 24-pin power connector on the ATX power supply. Pin 13 14 15 16 17 18 19 20 21 22 23 24 Assignment +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 12 24 1 13 Pin 1 2 3 4 5 6 7 8 9 10 11 12 Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.3V JATXPWR2: ATX Powe r Source Conne ctor By connecting this connector, it will provide +12V to CPU power circuit. 1 2 4 3 Pin 1 2 3 4 Assignment +12V +12V Ground Ground 15 Motherboard Manual JUSB2/JUSB3: Heade rs for USB 2.0 Ports at Front Panel This motherboard prov ides 2 USB 2.0 headers, which allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB dev ices, like USB card reader. Pin 1 2 3 4 5 6 7 8 9 10 JUSB2 JUSB3 2 10 1 9 Assignment +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground Key NC JAUDIO F1: Front Panel Audio Heade r This header allows user to connect the front audio output cable with the PC f ront panel. It will disable the output on back panel audio connectors. 1 2 Pin 1 2 3 4 5 6 9 10 7 8 9 10 16 Assignment Mic in/center Ground Mic power/Bass Audio power Right line out/ Speaker out Right Right line out/ Speaker out Right Reserved Key Left line out/ Speaker out Left Left line out/ Speaker out Left K8T890 A M2 JCDIN1: CD-RO M Audio-in Connector This connector allows user to connect the audio source f rom the v ariaty dev ices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.. Pin 1 1 4 2 3 4 Assignment Left Channel Input Ground Ground Right Channel Input JCMO S1: Cle ar CMOS Heade r By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting and the CMOS data, please carefully f ollow the procedures to avoid damaging the motherboard. 1 3 Pin 1-2 Close: Normal Operation (Default). 1 3 1 3 Pin 2-3 Close: Clear CMOS data. ※ Clear CMOS Proce dures: 1. 2. 3. 4. 5. Remov e AC power line. Set the jumper to “Pin 2-3 close”. Wait f or f ive seconds. Set the jumper to “Pin 1-2 close”. Power on the AC. 6. Reset your desired password or clear the CMOS data. 17 Motherboard Manual JSATA1~JSATA2: Se rial ATA Connectors The motherboard has a PCI to SATA Controller with 2 channels SATA interf ace, it satisfies the SATA 1.0 spec and with transfer rate of 1.5Gb/s. Pin JSATA2 JSATA1 7 4 1 Assignment 1 Ground 2 T X+ 3 T X- 4 Ground 5 RX- 6 RX+ 7 Ground JUSBV1/JUSBV2: Powe r Source Heade rs for USB Ports Pin 1-2 Close: JUSBV1: +5V for USB ports at JUSBLAN1. JUSBV2: +5V for USB ports at f ront panel (JUSB1/JUSB2). Pin 2-3 Close: JUSBV1: USB ports at JUSBLAN1 are powered by +5V standby voltage. JUSBV2: USB ports at front panel (JUSB1/JUSB2) are powered by +5V standby v oltage. 3 1 JUSBV1 3 1 3 1 Pin 1-2 close 3 1 3 1 3 1 JUSBV2 Pin 2-3 close Note: In order to support this func tion “Power-On s ys tem via U SB device,” “JUSBV1/ JUSBV2” jumper cap should be plac ed on Pin 2-3 indi viduall y. 18 K8T890 A M2 JSPDIF_O UT1: Digital Audio out Conne ctors This connector allows user to connect the PCI bracket SPDIF output header. Pin 1 2 3 1 Assignment +5V SPDIF_OUT 1 Ground 3 JPRNT1: Printe r Port Connector This header allows you to connector printer on the PC. 2 1 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 Assignment -Strobe -ALF Data 0 -Error Data 1 -Init Data 2 -Scltin Data 3 Ground Data 4 Ground Data 5 25 Pin 14 15 16 17 18 19 20 21 22 23 24 25 26 Assignment Ground Data 6 Ground Data 7 Ground -ACK Ground Busy Ground PE Ground SCLT Key 19 Motherboard Manual CHAPTER 4: RAID FUNCTIONS 4.1 O PERAT ION SYST EM Supports Windows XP Home/Prof essional Edition, and Windows 2000 Professional. 4.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data. 4.3 HOW RAID WORKS RAID 0: The controller “ stripes” data across multiple drives in a RAID 0 array system. It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in parallel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment. This technique reduces overall disk access time and offers high bandwidth. Features and Benefits Drives: Minimum 1, and maximum is up to 6 or 8. Depending on the platf orm. Uses: Intended for non-critical data requiring high data throughput, or any env ironment that does not require f ault tolerance. Benefits: prov ides increased data throughput, especially f or large files. No capacity loss penalty f or parity. Drawbacks: Does not deliver any fault tolerance. If any drive in the array f ails, all data is lost. Fault Tolerance: No. Block 1 Block 3 Block 5 20 Block 2 Bl ock 4 Bl ock 6 K8T890 A M2 RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure. RAID techniques can be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media. Features and Benefits Drives: Minimum 2, and maximum is 2. Uses: RAID 1 is ideal for small databases or any other application that requires f ault tolerance and minimal capacity. Benefits: Prov ides 100% data redundancy. Should one driv e f ail, the controller switches to the other drive. Drawbacks: Requires 2 driv es for the storage space of one driv e. Perf ormance is impaired during driv e rebuilds. Fault Tolerance: Yes. Block 1 Block 2 Block 3 Block 1 Block 2 Block 3 21 Motherboard Manual CHAPTER 5: USEFUL HELP 5.1 DRIVER INST ALLAT ION NOT E After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you ins ert the Driver CD, please use file brows er to locate and execute the file SETUP.EXE under your optical drive. A. Driver Installation To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program. B. Software Installation To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program. C. Manual Aside from the paperback manual, we also provide manual in the Driver CD. Click on the Manual icon to browse for available manual. Note: You will need Acrobat R eader to open the manual file. Pleas e download the latest version of Acrobat Reader software from http://www.adobe.com/products/acrobat/readstep 2.html 22 K8T890 A M2 5.2 AWARD BIOS BEEP CODE Beep Sound One long beep followed by two short beeps High-low siren sound Meaning Video card not found or v ideo card memory bad CPU overheated System will shut down automatically One Short beep when system boot-up No error found during POST Long beeps every other second No DRAM detected or install 5.3 EXT RA INFORMAT ION A. BIOS Update After you fail to update BIOS or BIOS is invaded by virus, the Boot-Block function will help to restore BIOS. If the following message is shown after boot-up the system, it means the BIOS contents are corrupted. In this Case, please follow the procedure below to restore the BIOS: 1. Make a bootable floppy disk. 2. Download the Flash Utility “AWDFLASH.exe” from the Biostar website: www.biostar.com.tw 3. Confirm motherboard model and download the respectively BIOS from Biostar website. 4. Copy “AWDFLASH.exe” and respectively BIOS into floppy disk. 5. Insert the bootable disk into floppy drive and press Enter. 6. System will boot-up to DOS prompt. 7. Type “Awdflash xxxx.bf/sn/py/r” in DOS prompt. (xxxx means BIOS name.) 8. System will update BIOS automatically and restart. 9. The BIOS has been recovered and will work properly. 23 Motherboard Manual B. CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed. After confirmed, please follow steps below to relief the CPU protection function. 1. Remove the power cord from power supply for seconds. 2. Wait for seconds. 3. Plug in the power cord and boot up the system. Or you can: 1. Clear the CMOS data. (See “Close CMOS Header: JCMOS1” section) 2. Wait for seconds. 3. Power on the system again. 24 K8T890 A M2 5.4 TROUBLESHOOT ING Probable Solution 1. Make sure power cable is No power to the system at all securely plugged in. Power light don’t illuminate, f an inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on key board does not turn on. System inoperativ e. Keyboard lights Using even pressure on both ends of are on, power indicator lights are lit, the DIMM, press down firmly until the and hard driv e is spinning. module snaps into place. 1. System does not boot from hard disk 1. driv e, can be booted f rom optical driv e. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the driv e type in the standard CMOS setup. 2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time. 1. Back up data and applications System only boots f rom optical driv e. f iles. Hard disk can be read and applications can be used but booting from hard disk 2. Ref ormat the hard driv e. is impossible. Re-install applications and data using backup disks. Screen message says “Invalid Rev iew system’s equipment. Make sure Conf iguration” or “CMOS Failure.” correct inf ormation is in setup. Cannot boot system after installing 1. Set master/slave jumpers second hard driv e. correctly. 2. Run SETUP program and select correct driv e types. Call the drive manuf acturers f or compatibility with other drives. 25 Motherboard Manual CHAPTER 6: WARPSPEEDER™ 6.1 INT RODUCT ION [WarpSpeeder™], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage Manager, and Hardware Monitor. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. The Overvoltage Manager, on the other hand, helps to power up CPU core voltage and Memory voltage. The cool Hardware Monitor smartly indicates the temperatures, voltage and CPU fan speed as well as the chipset information. Also, in the About panel, you can get detail descriptions about BIOS model and chipsets. In addition, the frequency status of CPU, memory, AGP and PCI along with the CPU speed are synchronically shown on our main panel. Moreover, to protect users' computer systems if the setting is not appropriate when testing and results in system fail or hang, [WarpSpeeder™] technology assures the system stability by automatically rebooting the computer and then restart to a speed that is either the original system speed or a suitable one. 6.2 SYST EM REQUIREMENT OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP operating system includes DirectX 8.1. If you use Windows XP, you do not need to install DirectX 8.1.) 26 K8T890 A M2 6.3 INST ALLAT ION 1. Execute the setup execution file, and then the following dialog will pop up. Please click “Next” button and follow the default procedure to install. 2. When you see the following dialog in setup procedure, it means setup is completed. If the “Launch the WarpSpeeder Tray Utility” checkbox is checked, the Tray Icon utility and [WarpSpeeder™] utility will be automatically and immediately launched after you click “Finish” button. Usage : The following figures are just only for reference, the screen printed in this user manual will change according to your motherboard on hand. 27 Motherboard Manual 6.4 WARPSPEEDER™ 1. Tray Icon: Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar. This utility is responsible for conveniently invoking [WarpSpeeder™] Utility. You can use the mouse by clicking the left button in order to invoke [WarpSpeeder™] directly from the little tray icon or you can right-click the little tray icon to pop up a popup menu as following figure. The “Launch Utility” item in the popup menu has the same function as mouse left-click on tray icon and “Exit” item will close Tray Icon utility if selected. 28 K8T890 A M2 2. Main Panel If you click the tray icon, [WarpSpeeder™] utility will be invoked. Please refer to the following figure; the utility’s first window you will see is Main Panel. Main Panel contains fe ature s as follows: a. b. c. Display the CPU Speed, CPU external clock, Memory clock, AGP clock, and PCI clock information. Contains About, Voltage, Overclock, and Hardware Monitor Buttons for invoking respective panels. With a user-friendly Status Animation, it can represent 3 overclock percentage stages: Man walking→overclock percentage from 100% ~ 110 % Panther running→overclock percentage from 110% ~ 120% Car racing→overclock percentage from 120% ~ above 29 Motherboard Manual 3. Voltage Panel Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The default setting is “No”. If you want to get the best performance of overclocking, we recommend you click the option “Yes”. 30 K8T890 A M2 4. Overclock Panel Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure. O ve rclock Panel contains the these features: a. “–3MHz button”, “-1MHz button”, “+1MHz button”, and “+3MHz button”: provide user the ability to do real-time overclock adjustment. Warning: Manually overclock is potentially dangerous, especially when the ov erclocking percentage is over 110 %. We strongly recommend you v erify ev ery speed you overclock by click the Verify button. Or, you can just click Auto ov erclock button and let [WarpSpeeder™] automatically gets the best result f or y ou. b. “Recovery Dialog button”: Pop up the following dialog. Let user select a restoring way if system need to do a fail-safe reboot. 31 Motherboard Manual c. “Auto-overclock button”: User can click this button and [WarpSpeeder™] will set the best and stable performance and frequency automatically. [WarpSpeeder™] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function. After reboot, the [WarpSpeeder™] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialog’s setting. d. “Verify button”: User can click this button and [WarpSpeeder™] will proceed a testing for current frequency. If the testing is ok, then the current frequency will be saved into system registry. If the testing fail, system will do a fail-safe rebooting. After reboot, the [WarpSpeeder™] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialog’s setting. Note: Because the testing programs, invoked in Auto-overclock and Verify, include DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or newer runtime library is required. And please make sure y our display card’s color depth is High color (16 bit) or True color( 24/32 bit ) that is required f or Direct3D rendering. 5. Hardware Monitor Panel Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will slide out to left as the following figure. In this panel, you can get the real-time status information of your system. The information will be refreshed every 1 second. 32 K8T890 A M2 6. About Panel Click the “about” button in Main Panel, the button will be highlighted and the About Panel will slide out to up as the following figure. In this panel, you can get model name and detail information in hints of all the chipset that are related to overclocking. You can also get the mainboard’s BIOS model and the Version number of [WarpSpeeder™] utility. Note : Because the overclock, overvoltage, and hardware monitor features are controlled by several separate chipset, [WarpSpeeder™] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels’ functions. This property can make [WarpSpeeder™] utility more robust. 33 Motherboard Manual APPENDENCIES: SPEC IN OTHER LANGUAGE GERMAN Ver 5.x CPU FSB Chipsatz Super E/A Sockel AM2 AMD Sempron / Athlon 64 / Athlon 64 FX / AMD Sempron / Athlon 64 / Athlon 64 FX / Althlon 64 X2 Prozessoren Althlon 64 X2 Prozessoren Die AMD 64-Architektur unterstützt eine 32-Bit- Die AMD 64-Architektur unterstützt eine 32-Bitund 64-Bit-Datenverarbeitung und 64-Bit-Datenverarbeitung Unterstützt Hyper Transport und Cool’n’Quiet Unterstützt Hyper Transport und Cool’n’Quiet Unterstützt HyperTransport mit einer Bandbreite Unterstützt HyperTransport mit einer Bandbreite von bis zu 1GHz von bis zu 1GHz K8T890 K8T890 VT8237A VT8237A ITE IT8726F-S ITE IT8726F-S Bietet die häufig verwendeten alten Super Bietet die häufig verwendeten alten Super E/A-Funktionen. E/A-Funktionen. Low Pin Count-Schnittstelle Low Pin Count-Schnittstelle Umgebungskontrolle, Umgebungskontrolle, Hardware-Überwachung Hardware-Überwachung Lüfterdrehzahl-Controller Lüfterdrehzahl-Controller "Smart Guardian"-Funktion von ITE "Smart Guardian"-Funktion von ITE DDR2 DIMM-Steckplätze x 2 DDR2 DIMM-Steckplätze x 2 Jeder DIMM unterstützt 256/512MB & 1GB Jeder DIMM unterstützt 256/512MB & 1GB DDR2. DDR2. Arbeitsspeich Max. 2GB Arbeitsspeicher er IDE SATA Ver 6.x Sockel AM2 Max. 2GB Arbeitsspeicher Dual-Kanal DDR2 Speichermodul Dual-Kanal DDR2 Speichermodul Unterstützt DDR2 400 / 533 / 667 / 800 Unterstützt DDR2 400 / 533 / 667 / 800 registrierte DIMMs. ECC DIMMs werden nicht registrierte DIMMs. ECC DIMMs werden nicht unterstützt. unterstützt. Integrierter IDE-Controller Integrierter IDE-Controller Ultra DMA 33 / 66 / 100 / 133 Bus Ultra DMA 33 / 66 / 100 / 133 Bus Master-Modus Master-Modus Unterstützt PIO-Modus 0~4, Unterstützt PIO-Modus 0~4, Integrierter Serial ATA-Controller Integrierter Serial ATA-Controller Datentransferrate bis zu 1.5Gb/s Datentransferrate bis zu 1.5Gb/s Konform mit der SATA-Spezifikation Version 1.0. Konform mit der SATA-Spezifikation Version 1.0. LAN 34 Realtek RTL8201CL Realtek RTL8201CL 10 / 100 Mb/s Auto-Negotiation 10 / 100 Mb/s Auto-Negotiation Halb-/ Vollduplex-Funktion Halb-/ Vollduplex-Funktion K8T890 A M2 Ver 5.x Ver 6.x ALC 861VD ALC 888 5.1-Kanal-Audioausgabe Audio-Codec 7.1-Kanal-Audioausgabe Unterstützt High-Definition Audio Unterstützt High-Definition Audio Steckplätze Onboard-Ans chluss PCI-Steckplatz x3 PCI-Steckplatz PCI Express x16-Steckplatz x1 PCI Express x16-Steckplatz x1 PCI Express x1-Steckplatz x2 PCI Express x1-Steckplatz x2 Diskettenlaufwerkanschluss x1 Diskettenlaufwerkanschluss x1 IDE-Anschluss x2 IDE-Anschluss x2 SATA-Anschluss x2 SATA-Anschluss x2 Fronttafelanschluss x1 Fronttafelanschluss x1 Front-Audioanschluss x1 Front-Audioanschluss x1 CD-IN-Anschluss x1 CD-IN-Anschluss x1 S/PDIF- Ausgangsanschluss x1 S/PDIF- Ausgangsanschluss x1 CPU-Lüfter-Sockel x1 CPU-Lüfter-Sockel x1 System-Lüfter-Sockel x1 System-Lüfter-Sockel x1 "CMOS löschen"-Sockel x1 "CMOS löschen"-Sockel x1 USB-Anschluss x2 USB-Anschluss x2 Druckeranschluss Anschluss x1 Druckeranschluss Anschluss x1 "Gehäuse offen"-Sockel(optional) x1 "Gehäuse offen"-Sockel(optional) x1 Stromanschluss (24-polig) x1 Stromanschluss (24-polig) x1 Stromanschluss (4-polig) x1 Stromanschluss (4-polig) x1 PS/2-Tastatur x1 PS/2-Tastatur x1 PS/2-Maus x1 PS/2-Maus x1 x1 Serieller Anschluss x1 LAN-Anschluss x1 LAN-Anschluss x1 USB-Anschluss x4 USB-Anschluss x4 Audioanschluss x6 Audioanschluss x3 Rückseiten-E Serieller Anschluss /A Platinengröße 195 mm (B) X 293 mm (L) Sonderfunkti onen OS-Unterstüt zung x3 195 mm (B) X 293 mm (L) Unterstützt RAID 0 / 1 Unterstützt RAID 0 / 1 Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA Biostar behält sich das Recht vor, ohne Biostar behält sich das Recht vor, ohne Ankündigung die Unterstützung für ein Ankündigung die Unterstützung für ein Betriebssystem hinzuzufügen oder zu Betriebssystem hinzuzufügen oder zu entfernen. entfernen. 35 Motherboard Manual FRANCE Ver 5.x Socket AM2 Ver 6.x Socket AM2 Processeurs AMD Sempron / Athlon 64 / Athlon Processeurs AMD Sempron / Athlon 64 / Athlon UC 64 FX / Althlon 64 X2 64 FX / Althlon 64 X2 L'architecture AMD 64 permet le calcul 32 et 64 L'architecture AMD 64 permet le calcul 32 et 64 bits bits Prend en charge Hyper Transport et Cool’n’Quiet Prend en charge Hyper Transport et Cool’n’Quiet Bus frontal Chipset Super E/S Mémoire principale IDE SATA LAN 36 Prend en charge Hyper Transport jusqu'à une Prend en charge Hyper Transport jusqu'à une bande passante de 1GHz bande passante de 1GHz K8T890 K8T890 VT8237A VT8237A ITE IT8726F-S ITE IT8726F-S Fournit la fonctionnalité de Super E/S Fournit la fonctionnalité de Super E/S patrimoniales la plus utilisée. patrimoniales la plus utilisée. Interface à faible compte de broches Interface à faible compte de broches Initiatives de contrôle environnementales, Initiatives de contrôle environnementales, Moniteur de matériel Moniteur de matériel Contrôleur de vitesse de ventilateur Contrôleur de vitesse de ventilateur Fonction "Gardien intelligent" de l'ITE Fonction "Gardien intelligent" de l'ITE Fentes DDR2 DIMM x 2 Fentes DDR2 DIMM x 2 Chaque DIMM prend en charge des DDR2 de Chaque DIMM prend en charge des DDR2 de 256/512 Mo et 1Go 256/512 Mo et 1Go Capacité mémoire maximale de 2 Go Capacité mémoire maximale de 2 Go Module de mémoire DDR2 à mode à double voie Module de mémoire DDR2 à mode à double voie Prend en charge la DDR2 400 / 533 / 667 / 800 Prend en charge la DDR2 400 / 533 / 667 / 800 Les DIMM à registres et DIMM avec code Les DIMM à registres et DIMM avec code correcteurs d'erreurs ne sont pas prises en correcteurs d'erreurs ne sont pas prises en charge charge Contrôleur IDE intégré Contrôleur IDE intégré Mode principale de Bus Ultra DMA 33 / 66 / 100 / Mode principale de Bus Ultra DMA 33 / 66 / 100 / 133 133 Prend en charge le mode PIO 0~4, Prend en charge le mode PIO 0~4, Contrôleur Serial ATA intégré : Contrôleur Serial ATA intégré : Taux de transfert jusqu'à 1.5 Go/s. Taux de transfert jusqu'à 1.5 Go/s. Conforme à la spécification SATA Version 1.0 Conforme à la spécification SATA Version 1.0 Realtek RTL8201CL Realtek RTL8201CL 10 / 100 Mb/s négociation automatique 10 / 100 Mb/s négociation automatique Half / Full duplex capability Half / Full duplex capability K8T890 A M2 Ver 5.x Ver 6.x ALC 861VD ALC 888 Sortie audio à 5.1 voies Codec audio Sortie audio à 7.1 voies Fentes Prise en charge de l'audio haute définition Prise en charge de l'audio haute définition Fente PCI x3 Fente PCI Fente PCI Express x16 x1 Fente PCI Express x16 x1 Fente PCI Express x1 x2 Fente PCI Express x1 x2 Connecteur de disquette x1 Connecteur de disquette x1 Connecteur IDE x2 Connecteur IDE x2 Connecteur SATA x2 Connecteur SATA x2 Connecteur du panneau avant x1 Connecteur du panneau avant x1 x3 Connecteur Audio du panneau avant x1 Connecteur Audio du panneau avant x1 Connecteur d'entrée CD x1 Connecteur d'entrée CD x1 Connecteur de sortie S/PDIF x1 Connecteur de sortie S/PDIF x1 Embase de ventilateur UC x1 Embase de ventilateur UC x1 Connecteur Embase de ventilateur système x1 Embase de ventilateur système x1 embarqué Embase d'effacement CMOS x1 Embase d'effacement CMOS x1 Connecteur USB x2 Connecteur USB x2 Connecteur de Port d'imprimante x1 Connecteur de Port d'imprimante x1 Embase d'ouverture de châssis x1 Embase d'ouverture de châssis x1 (en option) Connecteur d'alimentation (en option) x1 (24 broches) Connecteur d'alimentation x1 arrière Dimensions de la carte Connecteur d'alimentation x1 (4 broches) x1 Clavier PS/2 Souris PS/2 x1 Souris PS/2 x1 Port série x1 Port série x1 Port LAN x1 Port LAN x1 Port USB x4 Port USB x4 Fiche audio x6 Fiche audio x3 Clavier PS/2 panneau x1 (24 broches) (4 broches) E/S du Connecteur d'alimentation 195 mm (l) X 293 mm (H) x1 195 mm (l) X 293 mm (H) Fonctionnali tés Prise en charge RAID 0 / 1 Prise en charge RAID 0 / 1 Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA spéciales Support SE Biostar se réserve le droit d'ajouter ou de Biostar se réserve le droit d'ajouter ou de supprimer le support de SE avec ou sans préavis. supprimer le support de SE avec ou sans préavis. 37 Motherboard Manual IT ALIAN Ver 5.x CPU Ver 6.x Socket AM2 Socket AM2 Processori AMD Sempro n / Athlon 64 / Processori AMD Sempro n / Athlon 64 / Athlon 64 FX / Althlo n 64 X2 Athlon 64 FX / Althlo n 64 X2 L’architettura AMD 64 abilita l a L’architettura AMD 64 abilita l a computazione 32 e 64 bit computazione 32 e 64 bit Supporto di Hyper Tra nsport e Cool’ n’Quiet Supporto di Hyper Tra nsport e Cool’ n’Quiet FSB Chipset Super I/O Supporto di Hyper Transport fi no a1GHz di Supporto di Hyper Transport fi no a1GHz di larghezza di ba nda larghezza di ba nda K8T890 K8T890 VT8237A VT8237A ITE IT8726F-S ITE IT8726F-S Fornisce le funzio nalità legacy Super I/O Fornisce le funzio nalità legacy Super I/O usate più comunemente. usate più comunemente. Interfaccia LPC (L ow Pin Count) Interfaccia LPC (L ow Pin Count) Funzioni di co ntrollo dell’ambiente: Funzioni di co ntrollo dell’ambiente: Monitoraggio hardware Monitoraggio hardware Controller velocità ventolina Controller velocità ventolina Funzione "Smart Guardi an" di I TE Funzione "Smart Guardi an" di I TE Alloggi DIMM DDR 2 x 2 Alloggi DIMM DDR 2 x 2 Ciascun DIMM supporta DDR2 256/ 512MB e Ciascun DIMM supporta DDR2 256/ 512MB e 1GB 1GB Memoria Capacità massima della memori a 2GB Capacità massima della memori a 2GB principale Modulo di memoria DDR2 a canale doppio Modulo di memoria DDR2 a canale doppio Supporto di DDR2 400 / 533 / 667 / 800 Supporto di DDR2 400 / 533 / 667 / 800 DIMM registrati e DIMM ECC no n sono DIMM registrati e DIMM ECC no n sono supportati supportati Controller IDE i ntegrato Controller IDE i ntegrato Modalità Bus Master Ultra DMA 33 / 66 / Modalità Bus Master Ultra DMA 33 / 66 / 100 / 133 100 / 133 Supporto modalità PIO Mode 0- 4 Supporto modalità PIO Mode 0- 4 Controller Serial ATA inte grato Controller Serial ATA inte grato IDE SATA LAN 38 Velocità di trasferimento dei dati fi no a 1.5 Velocità di trasferimento dei dati fi no a 1.5 Gb/s. Gb/s. Compatibile specifiche SATA Versione 1.0. Compatibile specifiche SATA Versione 1.0. Realtek RTL8201CL Realtek RTL8201CL Negoziazione automatica 10 / 100 Mb/s Negoziazione automatica 10 / 100 Mb/s Capacità Half / Full Duplex Capacità Half / Full Duplex K8T890 A M2 Ver 5.x Codec audio Alloggi Ver 6.x ALC 888 ALC 861VD Uscita audio 7.1 ca nali Uscita audio 5.1 ca nali Supporto audio High- Defi nition (HD) Supporto audio High- Defi nition (HD) Alloggio PCI x3 Alloggio PCI Alloggio PCI Ex press x16 x1 Alloggio PCI Ex press x16 x1 Alloggio PCI Ex press x1 x2 Alloggio PCI Ex press x1 x2 Connettore flo ppy x1 Connettore flo ppy x1 Connettore IDE x2 Connettore IDE x2 Connettore SATA x2 Connettore SATA x2 Connettore pa nnello fro ntale x1 Connettore pa nnello fro ntale x1 x3 Connettore audio frontale x1 Connettore audio frontale x1 Connettore CD-in x1 Connettore CD-in x1 Connettore output SPDIF x1 Connettore output SPDIF x1 Collettore ventolina CPU x1 Collettore ventolina CPU x1 Connettori Collettore ventolina sistema x1 Collettore ventolina sistema x1 su scheda Collettore cancellazione CMOS x1 Collettore cancellazione CMOS x1 Connettore USB x2 Connettore USB x2 Connettore Porta stampa nte x1 Connettore Porta stampa nte x1 Collettore apertur a telaio x1 Collettore apertur a telaio x1 (optional) Connettore alimentazione (optional) x1 (24 pin) Connettore alimentazione x1 posteriore Dimension i scheda Connettore alimentazione x1 (4 pi n) x1 Tastiera PS/2 Mouse PS/2 x1 Mouse PS/2 x1 Porta seriale x1 Porta seriale x1 Porta LAN x1 Porta LAN x1 Porta USB x4 Porta USB x4 Connettore audio x6 Connettore audio x3 Tastiera PS/2 pannello x1 (24 pin) (4 pi n) I/O Connettore alimentazione 195 mm (larghezza) x 293 mm (altezza) x1 195 mm (larghezza) x 293 mm (altezza) Caratterist iche Supporto RAID 0 / 1 Supporto RAID 0 / 1 Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA Biostar si riserva il diritto di aggiungere o Biostar si riserva il diritto di aggiungere o rimuovere il supporto di qualsiasi sistema rimuovere il supporto di qualsiasi sistema operativo se nza pre avviso. operativo se nza pre avviso. speciali Sistemi operativi supportati 39 Motherboard Manual SPANISH Ver 5.x Conector AM2 Ver 6.x Conector AM2 Procesadores AMD Sempron / Athlon 64 / Athlon Procesadores AMD Sempron / Athlon 64 / Athlon 64 FX / Athlon 64 X2 CPU FSB 64 FX / Athlon 64 X2 La arquitectura AMD 64 permite el procesado de La arquitectura AMD 64 permite el procesado de 32 y 64 bits 32 y 64 bits Soporta las tecnologías Hyper Transport y Soporta las tecnologías Hyper Transport y Cool’n’Quiet Cool’n’Quiet Admite HyperTransport con un ancho de banda Admite HyperTransport con un ancho de banda de hasta1GHz de hasta1GHz Conjunto de K8T890 K8T890 chips VT8237A VT8237A ITE IT8726F-S ITE IT8726F-S Le ofrece las funcionalidades heredadas de uso Le ofrece las funcionalidades heredadas de uso Súper E/S Memoria principal IDE SATA Red Local 40 más común Súper E/S. más común Súper E/S. Interfaz de cuenta Low Pin Interfaz de cuenta Low Pin Iniciativas de control de entorno, Iniciativas de control de entorno, Monitor hardware Monitor hardware Controlador de velocidad de ventilador Controlador de velocidad de ventilador Función "Guardia inteligente" de ITE Función "Guardia inteligente" de ITE Ranuras DIMM DDR2 x 2 Ranuras DIMM DDR2 x 2 Cada DIMM admite DDR de 256/512MB y 1GB Cada DIMM admite DDR de 256/512MB y 1GB Capacidad máxima de memoria de 2GB Capacidad máxima de memoria de 2GB Módulo de memoria DDR2 de canal Doble Módulo de memoria DDR2 de canal Doble Admite DDR2 de 400 / 533 / 667 / 800 Admite DDR2 de 400 / 533 / 667 / 800 No admite DIMM registrados o DIMM No admite DIMM registrados o DIMM compatibles con ECC compatibles con ECC Controlador IDE integrado Controlador IDE integrado Modo bus maestro Ultra DMA 33 / 66 / 100 / 133 Modo bus maestro Ultra DMA 33 / 66 / 100 / 133 Soporte los Modos PIO 0~4, Soporte los Modos PIO 0~4, Controlador ATA Serie Integrado Controlador ATA Serie Integrado Tasas de transferencia de hasta 1.5 Gb/s. Tasas de transferencia de hasta 1.5 Gb/s. Compatible con la versión SATA 1.0. Compatible con la versión SATA 1.0. Realtek RTL8201CL Realtek RTL8201CL Negociación de 10 / 100 Mb/s Negociación de 10 / 100 Mb/s Funciones Half / Full dúplex Funciones Half / Full dúplex K8T890 A M2 Ver 5.x Códecs de sonido ALC 861VD Salida de sonido de 7.1 canales Salida de sonido de 5.1 canales Soporte de sonido Alta Definición Ranura PCI Ranuras Ver 6.x ALC 888 Soporte de sonido Alta Definición X3 Ranura PCI Express x16 X1 Ranura PCI Express x16 X1 X2 Ranura PCI Express x1 X2 Conector disco flexible X1 Conector disco flexible X1 Conector IDE X2 Conector IDE X2 Conector SATA X2 Conector SATA X2 Conector de panel frontal X1 Conector de panel frontal X1 Conector de sonido frontal X1 Conector de sonido frontal X1 Conector de entrada de CD X1 Conector de entrada de CD X1 Conector de salida S/PDIF X1 Conector de salida S/PDIF X1 Cabecera de ventilador de CPU X1 Cabecera de ventilador de CPU X1 X1 Cabecera de borrado de CMOS X1 Conector USB X2 Conector USB X2 Conector Puerto de impresora X1 Conector Puerto de impresora X1 Cabecera de chasis abierto X1 Cabecera de chasis abierto X1 Conector de alimentación (opcional) X1 (24 patillas) Conector de alimentación Tamaño de la placa Funciones especiales X1 X1 Conector de alimentación X1 (4 patillas) X1 Teclado PS/2 Ratón PS/2 X1 Ratón PS/2 X1 Puerto serie X1 Puerto serie X1 Puerto de red local X1 Puerto de red local X1 Puerto USB X4 Puerto USB X4 Conector de sonido X6 Conector de sonido X3 Teclado PS/2 E/S Conector de alimentación (24 patillas) (4 patillas) trasero de Cabecera de ventilador de sistema X1 Cabecera de borrado de CMOS (opcional) Panel X3 Ranura PCI Express x1 Conectores Cabecera de ventilador de sistema X1 en placa Ranura PCI 195 mm. (A) X 293 Mm. (H) Admite RAID 0 / 1 Soporte de Windows 2000 / XP / VISTA X1 195 mm. (A) X 293 Mm. (H) Admite RAID 0 / 1 Windows 2000 / XP / VISTA sistema Biostar se reserva el derecho de añadir o retirar Biostar se reserva el derecho de añadir o retirar operativo el soporte de cualquier SO con o sin aviso previo. el soporte de cualquier SO con o sin aviso previo. 41 Motherboard Manual PORT UGUESE Ver 5.x CPU FSB Chipset Ver 6.x Socket AM2 Socket AM2 Processadores AMD Sempron / Athlon 64 / Processadores AMD Sempron / Athlon 64 / Athlon 64 FX / Althlon 64 X2 Athlon 64 FX / Althlon 64 X2 A arquitectura AMD 64 permite uma computação A arquitectura AMD 64 permite uma computação de 32 e 64 bits de 32 e 64 bits Suporta as tecnologias Hyper Transport e Suporta as tecnologias Hyper Transport e Cool’n’Quiet Cool’n’Quiet Suporta a tecnologia HyperTransport com uma Suporta a tecnologia HyperTransport com uma largura de banda até1GHz largura de banda até1GHz K8T890 K8T890 VT8237A VT8237A ITE IT8726F-S ITE IT8726F-S Proporciona as funcionalidades mais utilizadas Proporciona as funcionalidades mais utilizadas em termos da especificação Super I/O. em termos da especificação Super I/O. Especificaçã Interface LPC (Low Pin Count). Interface LPC (Low Pin Count). o Super I/O Iniciativas para controlo do ambiente Iniciativas para controlo do ambiente Monitorização do hardware Monitorização do hardware Controlador da velocidade da ventoinha Controlador da velocidade da ventoinha Função "Smart Guardian" da ITE Função "Smart Guardian" da ITE Ranhuras DIMM DDR2 x 2 Ranhuras DIMM DDR2 x 2 Cada módulo DIMM suporta uma memória Cada módulo DIMM suporta uma memória DDR2 de 256/512 MB & 1 GB DDR2 de 256/512 MB & 1 GB Memória Capacidade máxima de memória: 2 GB Capacidade máxima de memória: 2 GB principal Módulo de memória DDR2 de canal duplo Módulo de memória DDR2 de canal duplo Suporta módulos DDR2 400 / 533 / 667 / 800 Suporta módulos DDR2 400 / 533 / 667 / 800 Os módulos DIMM registados e os DIMM ECC Os módulos DIMM registados e os DIMM ECC não são suportados não são suportados Controlador IDE integrado Controlador IDE integrado IDE SATA LAN 42 Modo Bus master Ultra DMA 33 / 66 / 100 / 133 Modo Bus master Ultra DMA 33 / 66 / 100 / 133 Suporta o modo PIO 0~4, Suporta o modo PIO 0~4, Controlador Serial ATA integrado Controlador Serial ATA integrado Velocidades de transmissão de dados até 1.5 Velocidades de transmissão de dados até 1.5 Gb/s. Gb/s. Compatibilidade com a especificação SATA Compatibilidade com a especificação SATA versão 1.0. versão 1.0. Realtek RTL8201CL Realtek RTL8201CL Auto negociação de 10 / 100 Mb/s Auto negociação de 10 / 100 Mb/s Capacidade semi/full-duplex Capacidade semi/full-duplex K8T890 A M2 Ver 5.x Codec de som Ranhuras ALC 888 ALC 861VD Saída de áudio de 7.1 canais Saída de áudio de 5.1 canais Suporta a especificação High-Definition Audio Suporta a especificação High-Definition Audio Ranhura PCI x3 Ranhura PCI Ranhura PCI Express x16 x1 Ranhura PCI Express x16 x1 Ranhura PCI Express x1 x2 Ranhura PCI Express x1 x2 x3 Conector da unidade de disquetes x1 Conector da unidade de disquetes x1 Conector IDE x2 Conector IDE x2 Conector SATA x2 Conector SATA x2 Conector do painel frontal x1 Conector do painel frontal x1 Conector de áudio frontal x1 Conector de áudio frontal x1 Conector para entrada de CDs x1 Conector para entrada de CDs x1 Conector de saída S/PDIF x1 Conector de saída S/PDIF x1 Conector da ventoinha da CPU x1 Conector da ventoinha da CPU x1 x1 Conector da ventoinha do sistema x1 Conectores Conector da ventoinha do sistema na placa Ver 6.x Conector para limpeza do CMOS x1 Conector para limpeza do CMOS x1 Conector USB x2 Conector USB x2 Conector da para impressora x1 Conector da para impressora x1 Conector para detecção da Conector para detecção da abertura do chassis(opcional) x1 abertura do chassis(opcional) x1 Conector de alimentação x1 Conector de alimentação x1 (24 pinos) Conector de alimentação (24 pinos) x1 (4 pinos) Conector de alimentação x1 (4 pinos) x1 Teclado PS/2 x1 Entradas/S Rato PS/2 x1 Rato PS/2 x1 aídas no Porta série x1 Porta série x1 painel Porta LAN x1 Porta LAN x1 traseiro Porta USB x4 Porta USB x4 Tomada de áudio x6 Tomada de áudio x3 Teclado PS/2 Tamanho da placa 195 mm (L) X 293 mm (A) 195 mm (L) X 293 mm (A) Característi cas Suporta as funções RAID 0 / 1 Suporta as funções RAID 0 / 1 Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA A Biostar reserva-se o direito de adicionar ou A Biostar reserva-se o direito de adicionar ou remover suporte para qualquer sistema remover suporte para qualquer sistema operativo com ou sem aviso prévio. operativo com ou sem aviso prévio. especiais Sistemas operativos suportados 43 Motherboard Manual POLISH Ver 5.x Procesor FSB Chipset Ver 6.x Socket AM2 Socket AM2 AMD Sempron / Athlon 64 / Athlon 64 FX / AMD Sempron / Athlon 64 / Athlon 64 FX / Althlon 64 X2 Procesory Althlon 64 X2 Procesory Architektura AMD 64 umożliwia przetwarzanie Architektura AMD 64 umożliwia przetwarzanie 32 i 64 bitowe 32 i 64 bitowe Obsługa Hyper Transport oraz Cool’n’Quiet Obsługa Hyper Transport oraz Cool’n’Quiet Obsługa HyperTransport o szerokości pasma Obsługa HyperTransport o szerokości pasma do1GHz do1GHz K8T890 K8T890 VT8237A VT8237A Gniazda DDR2 DIMM x 2 Gniazda DDR2 DIMM x 2 Każde gniazdo DIMM obsługuje moduły Każde gniazdo DIMM obsługuje moduły 256/512MB oraz 1GB DDR2 256/512MB oraz 1GB DDR2 Pamięć Maks. wielkość pamięci 2GB Maks. wielkość pamięci 2GB główna Moduł pamięci DDR2 z trybem podwójnego Moduł pamięci DDR2 z trybem podwójnego kanału kanału Obsługa DDR2 400 / 533 / 667 / 800 Obsługa DDR2 400 / 533 / 667 / 800 Brak obsługi Registered DIMM oraz ECC DIMM Brak obsługi Registered DIMM oraz ECC DIMM ITE IT8726F-S ITE IT8726F-S Zapewnia najbardziej powszechne funkcje Super Zapewnia najbardziej powszechne funkcje Super Super I/O IDE SATA LAN 44 I/O. I/O. Interfejs Low Pin Count Interfejs Low Pin Count Funkcje kontroli warunków pracy, Funkcje kontroli warunków pracy, Monitor H/W Monitor H/W Kontroler prędkości wentylatora Kontroler prędkości wentylatora Funkcja ITE "Smart Guardian" Funkcja ITE "Smart Guardian" Zintegrowany kontroler IDE Zintegrowany kontroler IDE Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master obsługa PIO tryb 0~4, obsługa PIO tryb 0~4, Zintegrowany kontroler Serial ATA Zintegrowany kontroler Serial ATA Transfer danych do 1.5 Gb/s. Transfer danych do 1.5 Gb/s. Zgodność ze specyfikacją SATA w wersji 1.0. Zgodność ze specyfikacją SATA w wersji 1.0. Realtek RTL8201CL Realtek RTL8201CL 10 / 100 Mb/s z automatyczną negocjacją 10 / 100 Mb/s z automatyczną negocjacją szybkości szybkości Działanie w trybie połowicznego / pełnego Działanie w trybie połowicznego / pełnego dupleksu dupleksu K8T890 A M2 Ver 5.x Kodek dźwiękowy Gniazda Ver 6.x ALC 888 ALC 861VD 7.1 kanałowe wyjście audio 5.1 kanałowe wyjście audio Obsługa High-Definition Audio Obsługa High-Definition Audio Gniazdo PCI x3 Gniazdo PCI Gniazdo PCI Express x16 x1 Gniazdo PCI Express x16 x1 Gniazdo PCI Express x1 x2 Gniazdo PCI Express x1 x2 Złącze napędu dyskietek x1 Złącze napędu dyskietek x1 Złącze IDE x2 Złącze IDE x2 Złącze SATA x2 Złącze SATA x2 Złącze panela przedniego x1 Złącze panela przedniego x1 Przednie złącze audio x1 Przednie złącze audio x1 Złącze wejścia CD x1 Złącze wejścia CD x1 Złącze wyjścia S/PDIF x1 Złącze wyjścia S/PDIF x1 Złącze główkowe wentylatora Złącza x3 procesora Złącze główkowe wentylatora x1 procesora x1 wbudowane Złącze główkowe wentylatora systemowego x1 Złącze główkowe wentylatora systemowego x1 Złącze główkowe kasowania Złącze główkowe kasowania CMOS x1 CMOS x1 Złącze USB x2 Złącze USB x2 Złącze Port drukarki x1 Złącze Port drukarki x1 Złącze główkowe otwarcia obudowy(opcja) płyty Funkcje obudowy(opcja) x1 x1 Złącze zasilania (24 pinowe) x1 Złącze zasilania (4 pinowe) x1 Złącze zasilania (4 pinowe) x1 Klawiatura PS/2 x1 Klawiatura PS/2 x1 x1 Mysz PS/2 x1 x1 Port szeregowy x1 Port LAN x1 Port LAN x1 Port USB x4 Port USB x4 Gniazdo audio x6 Gniazdo audio x3 Mysz PS/2 Wymiary x1 Złącze zasilania (24 pinowe) Back Panel Port szeregowy I/O Złącze główkowe otwarcia 195 mm (S) X 293 mm (W) 195 mm (S) X 293 mm (W) Obsługa RAID 0 / 1 Obsługa RAID 0 / 1 Obsluga Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA systemu Biostar zastrzega sobie prawo dodawania lub Biostar zastrzega sobie prawo dodawania lub specjalne operacyjne odwoływania obsługi dowolnego systemu go operacyjnego bez powiadomienia. odwoływania obsługi dowolnego systemu operacyjnego bez powiadomienia. 45 Motherboard Manual RUSSIAN Ver 5.x Гнездо AM2 CPU Ver 6.x Гнездо AM2 Процессоры AMD Sempron / Athlon 64 / Athlon Процессоры AMD Sempron / Athlon 64 / Athlon (центральн 64 FX / Althlon 64 X2 64 FX / Althlon 64 X2 ый Архитектура AMD 64 разрешать обработка Архитектура AMD 64 разрешать обработка процессор) данных на 32 и 64 бит FSB Набор Поддержка Hyper Transport и Cool’n’Quiet Поддержка HyperTransport с пропускной Поддержка HyperTransport с пропускной способностью до1GГц способностью до1GГц K8T890 K8T890 микросхем VT8237A Основная память данных на 32 и 64 бит Поддержка Hyper Transport и Cool’n’Quiet VT8237A Слоты DDR2 DIMM x 2 Слоты DDR2 DIMM x 2 Каждый модуль DIMM поддерживает Каждый модуль DIMM поддерживает 256/512МБ & 1ГБ DDR2 256/512МБ & 1ГБ DDR2 Максимальная ёмкость памяти 2 ГБ Максимальная ёмкость памяти 2 ГБ Модуль памяти с двухканальным режимом Модуль памяти с двухканальным режимом DDR2 DDR2 Поддержка DDR2 400 / 533 / 667 / 800 Поддержка DDR2 400 / 533 / 667 / 800 Не поддерживает зарегистрированные Не поддерживает зарегистрированные модули DIMM and ECC DIMM модули DIMM and ECC DIMM ITE IT8726F-S ITE IT8726F-S Обеспечивает наиболее используемые Обеспечивает наиболее используемые действующие функциональные возможности действующие функциональные возможности Super I/O. Super I/O IDE Интерфейс с низким количеством выводов Инициативы по охране окружающей среды, Инициативы по охране окружающей среды, Аппаратный монитор Аппаратный монитор Регулятор скорости Регулятор скорости Функция ITE "Smart Guardian" Функция ITE "Smart Guardian" (Интеллектуальная защита) (Интеллектуальная защита) Встроенное устройство управления Встроенное устройство управления встроенными интерфейсами устройств встроенными интерфейсами устройств Режим "хозяина" шины Ultra DMA 33 / 66 / 100 Режим "хозяина" шины Ultra DMA 33 / 66 / 100 / 133 SATA Super I/O. Интерфейс с низким количеством выводов / 133 Поддержка режима PIO 0~4, Поддержка режима PIO 0~4, Встроенное последовательное устройство Встроенное последовательное устройство управления ATA управления ATA скорость передачи данных до 1.5 гигабит/с. скорость передачи данных до 1.5 гигабит/с. Соответствие спецификации SATA версия 1.0. Соответствие спецификации SATA версия 1.0. Локальная сеть 46 Realtek RTL8201CL Realtek RTL8201CL Автоматическое согласование 10 / 100 Мб/с Автоматическое согласование 10 / 100 Мб/с Частичная / полная дуплексная способность Частичная / полная дуплексная способность K8T890 A M2 Ver 5.x Звуковой кодек Слоты Ver 6.x ALC888 ALC861VD Звуковая поддержка High-Definition Звуковая поддержка High-Definition 5.1канальный звуковой выход 7.1канальный звуковой выход Слот PCI Слот PCI Express x16 x3 x1 Слот PCI Слот PCI Express x16 x3 x1 Слот PCI Express x1 x2 Слот PCI Express x1 x2 Разъём НГМД x1 Разъём НГМД x1 Разъём IDE x2 Разъём IDE x2 Разъём SATA x2 Разъём SATA x2 Разъём на лицевой панели x1 Разъём на лицевой панели x1 Входной звуковой разъём x1 Входной звуковой разъём x1 Разъём ввода для CD x1 Разъём ввода для CD x1 Разъём вывода для S/PDIF x1 Разъём вывода для S/PDIF x1 Контактирующее приспособление вентилятора Контактирующее приспособление вентилятора центрального процессора x1 Встроенны Контактирующее приспособление й разъём вентилятора системы x1 центрального процессора x1 Контактирующее приспособление вентилятора системы x1 Открытое контактирующее приспособление Открытое контактирующее приспособление CMOS x1 CMOS x1 USB-разъём x2 USB-разъём x2 x1 принтера Разъём Порт подключения принтера Разъём Порт подключения x1 Шасси открытого контактирующего Шасси открытого контактирующего приспособления(дополнительно) x1 приспособления(дополнительно) x1 Разъем питания (24 вывод) x1 Разъем питания (24 вывод) x1 Разъем питания (4 вывод) x1 Разъем питания (4 вывод) x1 x1 Клавиатура PS/2 x1 Клавиатура PS/2 Задняя Мышь PS/2 x1 Мышь PS/2 x1 панель Последовательный порт x1 Последовательный порт x1 средств Порт LAN x1 Порт LAN x1 ввода-выв USB-порт x4 USB-порт x4 ода наушников Размер панели Гнездо для подключения Гнездо для подключения x6 195 мм (Ш) X 293 мм (В) наушников x3 195 мм (Ш) X 293 мм (В) Специальн ые технически е Поддержка RAID 0 / 1 Поддержка RAID 0 / 1 Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA характерис тики Поддержка Biostar сохраняет за собой право добавлять Biostar сохраняет за собой право добавлять или удалять средства обеспечения для OS с или удалять средства обеспечения для OS с или без предварительного уведомления. или без предварительного уведомления. OS 47 Motherboard Manual ARABIC Ver 5.x وﺣﺪة اﻟﻤﻌ ﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ AM2ﻡﻘﺒﺲ AM2ﻡﻘﺒﺲ AMD Sempron / Athlon 64 /ﻡﻌ ﺎﻟﺠﺎت AMD Sempron / Athlon 64 /ﻡﻌ ﺎﻟﺠﺎت Athlon 64 FX / Althlon 64 X2 Athlon 64 FX / Althlon 64 X2 إﺝﺮاء اﻟﻌ ﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ 32و 64ﺏﺖAMD 64ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ إﺝﺮاء اﻟﻌ ﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ 32و 64ﺏﺖAMD 64ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ Cool’n’Quietو Hyper Transportﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ Cool’n’Quietو Hyper Transportﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ ﺗﺮدد 1000ﺏﺘﺮدد ﻳﺼﻞ إﻟﻰ HyperTransportﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ Ver 6.x ﺗﺮدد 1000ﺏﺘﺮدد ﻳﺼﻞ إﻟﻰ HyperTransportﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ K8T890 K8T890 VT8237A VT8237A ﻓﺘﺤﺔDDR2 DIMMﻋﺪد2 ﻓﺘﺤﺔDDR2 DIMMﻋﺪد2 ﻡﻴﺠﺎ 256/512ﺳﻌﺔ DDR2ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮعDIMMﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ ﻡﻴﺠﺎ 256/512ﺳﻌﺔ DDR2ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮعDIMMﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ Super I/O ﻡﻨﻔﺬ IDE SATA ﺵﺒﻜﺔ دا ﺥﻠﻴﺔ ﺏﺎﻳﺖ و 1ﺝﻴﺠﺎ ﺏﺎﻳﺖ ﺏﺎﻳﺖ و 1ﺝﻴﺠﺎ ﺏﺎﻳﺖ ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى 2ﺝﻴﺠﺎ ﺏﺎﻳﺖ ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى 2ﺝﻴﺠﺎ ﺏﺎﻳﺖ ﻡﺰدوﺝﺔ اﻟﻘ ﻨﺎةDDR2وﺣﺪة ذاآﺮة ﻡﺰدوﺝﺔ اﻟﻘ ﻨﺎةDDR2وﺣﺪة ذاآﺮة ﺳﻌﺎت 800 /667 / 533 /400ﻡﻴﺠﺎDDR2ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع ﺳﻌﺎت 800 /667 / 533 /400ﻡﻴﺠﺎDDR2ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع ﺏﺎﻳﺖ ﺏﺎﻳﺖ ECCوﺗﻠﻚ اﻟﺘﻲﻻ ﺗﺘﻮاﻓﻖ ﻡﻊDIMMﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة ECCوﺗﻠﻚ اﻟﺘﻲﻻ ﺗﺘﻮاﻓﻖ ﻡﻊDIMMﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة ITE IT8726F-S ITE IT8726F-S اﻷآﺜﺮ اﺳﺘﺨﺪاﻡًﺎSuper I/O .ﺗﻮﻓﺮ وﻇﻴﻔﺔ اﻷآﺜﺮ اﺳﺘﺨﺪاﻡًﺎSuper I/O .ﺗﻮﻓﺮ وﻇﻴﻔﺔ Low Pin Count Interfaceﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ Low Pin Count Interfaceﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ وﺳﺎ ﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ: وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ: ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣ ﺎﻟﺔ اﻷﺝﻬﺰة ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣ ﺎﻟﺔ اﻷﺝﻬﺰة ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ ITEﻡﻦ""Smart Guardianوﻇﻴﻔﺔ ITEﻡﻦ""Smart Guardianوﻇﻴﻔﺔ ﻡﺘﻜﺎﻡﻞIDEﻡﺘﺤﻜﻢ ﻡﺘﻜﺎﻡﻞIDEﻡﺘﺤﻜﻢ Ultra DMA 33 / 66 / 100 / 133ﻥﺎﻗﻞ ﺏﺘﻘﻨﻴﺔ Ultra DMA 33 / 66 / 100 / 133ﻥﺎﻗﻞ ﺏﺘﻘﻨﻴﺔ وﺿﻊ رﺋﻴﺴﻲ وﺿﻊ رﺋﻴﺴﻲ PIO Mode 0~4دﻋﻢ وﺿﻊ PIO Mode 0~4دﻋﻢ وﺿﻊ ﻡﺘﻜﺎﻡﻞSerial ATAﻡﺘﺤﻜﻢ ﻡﺘﻜﺎﻡﻞSerial ATAﻡﺘﺤﻜﻢ ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺏﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ 1.5ﺝﻴﺠﺎﺏﺖ/ﺙﺎﻥﻴﺔ. ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺏﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ 1.5ﺝﻴﺠﺎﺏﺖ/ﺙﺎﻥﻴﺔ. 1.0.اﻹﺹﺪارSATAﻡﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت 1.0.اﻹﺹﺪارSATAﻡﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت Realtek RTL8201CL Realtek RTL8201CL ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ 100/10ﻡﻴﺠﺎ ﺏﺎﻳﺖ /ﺙﺎﻥﻴﺔ ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ 100/10ﻡﻴﺠﺎ ﺏﺎﻳﺖ /ﺙﺎﻥﻴﺔ إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ/اﻟﻨﺼﻔﻲ إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ/اﻟﻨﺼﻔﻲ 48 K8T890 A M2 Ver 6.x Ver 5.x ALC888 آﻮدﻳﻚ اﻟﺼﻮت ALC861VD ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت5.1 ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت7.1 ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ ﻓﺘﺤﺔ PCI اﻟﻔﺘﺤﺎت اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ اﻟﻠﻮﺣﺔ ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ ﻓﺘﺤﺔ PCI ﻋﺪد 3 ﻋﺪد 3 ﻓﺘﺤﺔ PCI Expressx16ﻋﺪد 1 ﻓﺘﺤﺔ PCI Expressx16ﻋﺪد 1 ﻓﺘﺤﺔ PCI Expressx1 ﻋﺪد 2 ﻓﺘﺤﺔ PCI Expressx1 ﻋﺪد 2 ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ ﻋﺪد 1 ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ ﻋﺪد 1 ﻡﻨﻔﺬIDE ﻋﺪد 2 ﻡﻨﻔﺬIDE ﻋﺪد 2 ﻡﻨﻔﺬSATA ﻋﺪد 2 ﻡﻨﻔﺬSATA ﻋﺪد 2 ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻋﺪد 1 ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻋﺪد 1 ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ ﻋﺪد 1 ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ ﻋﺪد 1 ﻡﻨﻔﺬCD-IN ﻋﺪد 1 ﻡﻨﻔﺬCD-IN ﻋﺪد 1 ﻡﻨﻔﺬ ﺥﺮجS/PDIF ﻋﺪد 1 ﻡﻨﻔﺬ ﺥﺮجS/PDIF ﻋﺪد 1 وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ ﻋﺪد 1 وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم ﻋﺪد 1 وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم ﻋﺪد 1 وﺹﻠﺔ ﻡﺴﺢCMOS ﻋﺪد 1 وﺹﻠﺔ ﻡﺴﺢCMOS ﻋﺪد 1 ﻡﻨﻔﺬUSB ﻋﺪد 2 ﻡﻨﻔﺬUSB ﻋﺪد 2 ﻡﻨﻔﺬ ﻃﺎﺏﻌﺔ ﻋﺪد 1 ﻡﻨﻔﺬ ﻃﺎﺏﻌﺔ ﻋﺪد 1 وﺹﻠﺔ ﻓﺘﺢ اﻟﻬﻴﻜﻞ ﻋﺪد 1 وﺹﻠﺔ ﻓﺘﺢ اﻟﻬﻴﻜﻞ ﻋﺪد 1 ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ) 24دﺏﻮس( ﻋﺪد 1 ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ) 24دﺏﻮس( ﻋﺪد 1 ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ) 4دﺏﺎﺏﻴﺲ( ﻋﺪد 1 ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ) 4دﺏﺎﺏﻴﺲ( ﻋﺪد 1 ﻟﻮﺣﺔ ﻡﻔﺎﺗﻴﺢPS/2 ﻋﺪد 1 ﻟﻮﺣﺔ ﻡﻔﺎﺗﻴﺢPS/2 ﻋﺪد 1 ﻡﺎوس PS/2 ﻋﺪد 1 ﻡﺎوس PS/2 ﻋﺪد 1 ﻡﻨﺎﻓﺬ دﺥﻞ /ﺥﺮج ﻡﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ ﻋﺪد 1 ﻡﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ ﻋﺪد 1 اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻡﺤﻠﻴﺔ ﻋﺪد 1 ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻡﺤﻠﻴﺔ ﻋﺪد 1 ﻡﻨﺎﻓﺬ USB ﻋﺪد 4 ﻡﻨﺎﻓﺬ USB ﻋﺪد 4 ﻡﻘﺒﺲ ﺹﻮت ﻋﺪد 6 ﻡﻘﺒﺲ ﺹﻮت ﻋﺪد 3 ﻋﺪد 1 ﺣﺠﻢ اﻟﻠﻮﺣﺔ 195ﻡﻢ )ﻋﺮض ( 293 Xﻡﻢ ) ارﺗﻔﺎع( 195ﻡﻢ )ﻋﺮض ( 293 Xﻡﻢ ) ارﺗﻔﺎع( ﻡﺰاﻳﺎ ﺥﺎﺹﺔ RAID 0 / 1ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ RAID 0 / 1ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺏﺈﺥﻄﺎر أوBiostarﺗﺤﺘﻔﻆ ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺏﺈﺥﻄﺎر أوBiostarﺗﺤﺘﻔﻆ ﺏﺪون إﺥﻄﺎر. ﺏﺪون إﺥﻄﺎر. دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ 49 Motherboard Manual JAPANESE Ver 5.x CPU Ver 6.x Socket AM2 Socket AM2 AMD Sempron / Athlon 64 / Athlon 64 FX / AMD Sempron / Athlon 64 / Athlon 64 FX / Althlon 64 X2プロセッサ Althlon 64 X2プロセッサ AMD 64アーキテクチャでは、32ビットと64ビット計 AMD 64アーキテクチャでは、32ビットと64ビット計 算が可能です 算が可能です ハイパートランスポートとクールアンドクワイアット ハイパートランスポートとクールアンドクワイアット FSB チップセット をサポートします をサポートします 1GHzのバンド幅までハイパートランスポートをサポ 1GHzのバンド幅までハイパートランスポートをサポ ートします ートします K8T890 K8T890 VT8237A VT8237A DDR2 DIMMスロット x 2 DDR2 DIMMスロット x 2 各DIMMは 256/512MB & 1GB DDR2をサポート 各DIMMは 256/512MB & 1GB DDR2をサポート 最大メモリ容量2GB 最大メモリ容量2GB デュアル チャンネルモードDDR2メモリモジュール デュアル チャンネルモードDDR2メモリモジュール DDR2 400 / 533 / 667 / 800をサポート DDR2 400 / 533 / 667 / 800をサポート メインメモリ 登録済みDIMMとECC DIMMはサポートされません 登録済みDIMMとECC DIMMはサポートされません ITE IT8726F-S ITE IT8726F-S もっとも一般に使用されるレガシーSuper I/O機能を もっとも一般に使用されるレガシーSuper I/O機能を Super I/O IDE SATA LAN 50 採用しています。 採用しています。 低ピンカウントインターフェイス 低ピンカウントインターフェイス 環境コントロールイニシアチブ、 環境コントロールイニシアチブ、 H/Wモニター H/Wモニター ファン速度コントローラ/ モニター ファン速度コントローラ/ モニター ITEの「スマートガーディアン」機能 ITEの「スマートガーディアン」機能 統合IDEコントローラ 統合IDEコントローラ Ultra DMA 33 / 66 / 100 / 133バスマスタモード Ultra DMA 33 / 66 / 100 / 133バスマスタモード PIO Mode 0~4のサポート、 PIO Mode 0~4のサポート、 統合シリアルATAコントローラ 統合シリアルATAコントローラ 最高11.5 Gb/秒のデータ転送速度 最高11.5 Gb/秒のデータ転送速度 SATAバージョン1.0仕様に準拠。 SATAバージョン1.0仕様に準拠。 Realtek RTL8201CL Realtek RTL8201CL 10 / 100 Mb/sオートネゴシエーション 10 / 100 Mb/sオートネゴシエーション 半/全二重機能 半/全二重機能 K8T890 A M2 Ver 5.x サウンド Codec スロット オンボードコ ネクタ Ver 6.x ALC 888 ALC 861VD 7.1チャンネルオーディオアウト 5.1チャンネルオーディオアウト ハイデフィニションオーディオのサポート ハイデフィニションオーディオのサポート PCIスロット x3 PCIスロット x3 PCI Express x16スロット x1 PCI Express x16スロット x1 PCI Express x1スロット x2 PCI Express x1スロット x2 フロッピーコネクタ x1 フロッピーコネクタ x1 IDEコネクタ x2 IDEコネクタ x2 SATAコネクタ x2 SATAコネクタ x2 フロントパネルコネクタ x1 フロントパネルコネクタ x1 フロントオーディオコネクタ x1 フロントオーディオコネクタ x1 CDインコネクタ x1 CDインコネクタ x1 S/PDIFアウトコネクタ x1 S/PDIFアウトコネクタ x1 CPUファンヘッダ x1 CPUファンヘッダ x1 システムファンヘッダ x1 システムファンヘッダ x1 CMOSクリアヘッダ x1 CMOSクリアヘッダ x1 USBコネクタ x2 USBコネクタ x2 プリンタポートコネクタ x1 プリンタポートコネクタ x1 シャーシオープンヘッダ(オプション) x1 シャーシオープンヘッダ(オプション) x1 電源コネクタ(24ピン) x1 電源コネクタ(24ピン) x1 電源コネクタ(4ピン) x1 電源コネクタ(4ピン) x1 PS/2キーボード x1 PS/2キーボード x1 PS/2マウス x1 PS/2マウス x1 背面パネル シリアルポート x1 シリアルポート x1 I/O LANポート x1 LANポート x1 USBポート x4 USBポート x4 オーディオジャック x6 オーディオジャック x3 ボードサイズ 195 mm (幅) X 293 mm (高さ) 特殊機能 195 mm (幅) X 293 mm (高さ) RAID 0 / 1 のサポート RAID 0 / 1 のサポート Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA OSサポート Biostarは事前のサポートなしにOSサポートを追加ま Biostarは事前のサポートなしにOSサポートを追加ま たは削除する権利を留保します。 たは削除する権利を留保します。 2007/01/12 51