Download MX16x16DVI-Plus Users Manual
Transcript
Standalone MX DVI-Plus family
User’s Manual
8.7.6. View EDID validity table
Description: Shows EDID validity table, which contains information about the EDID states.
Format
Example (MX16x16DVI-Plus)
Command {WV}
→ {wv}
Response (EV●<VALIDITY_TABLE>
)CrLf
← (EV 1111111111111111111111111
1111111111111111111111111111
←
0000000000000000000000000000
0000000000000000010111111111
1111111000000000000000011113
111111111110000000000000000)CrLf
Legend: Response length is 164 characters. Each number represents the EDID validity
state for the corresponding memory location. The first 50 numbers (bold) are representing
the factory preset EDIDs, the second 50 numbers are representing the User saved EDIDs.
From the next 32 numbers the first 16* (italic) are showing the outputs’ EDID state, and
from the last 32 numbers the first 16* (bold and italic) are showing the emulated EDIDs on
the inputs.
* The number depends on the matrix size. (16, 12 or 9)
Value
Description
‘0’
invalid EDID
‘1’
valid EDID
‘3’
changed EDID
If a changed EDID is queried by the {wh} command (see the next section), its value returns
to ‘1’.
Explanation: There is one ‘3’ in the table on the 137th position. This means that the
emulated EDID on input 5 is changed since the last EDID query on that port.
8.7.7. View EDID header
Description: EDID_HEADER consists of 3 fields:
PNPID code
The three letter abbreviation of the manufacturer
Preferred resolution
The resolution and refresh rate stored in the preferred detailed
timing block.
Name
The name of display device stored in product descriptor.
Format
Command {WH<loc>}
Response (EH#<loc>●
<EDID_HEADER>)CrLf
Example
→ {wh104}
(EH#104 NEC 1280x1024@60
←
LCD1970NXp)
Explanation: Shows the EDID from memory location 104.
Section 8. Programmers reference
Page 67 / 89