Download Errata Sheet

Errata Sheet
Deviations from Electrical- and Timing Specification
3
Deviations from Electrical- and Timing
Specification
AC_PER_TC.P001 Driver Settings for SSC and MLI Outputs on A2 Pads
In general, AC timings are specified for the strongest/fastest possible output
driver setting.
However, for SSC and MLI, the specified timings are only valid if outputs on A2
pads are configured for strong driver/medium edge mode.
FADC_TC.P004 FADC DNL Error Specification for Gain 4 and 8
The FADC DNL error depends on the gain selected in bitfield ACRx.GAIN as
shown in the following table.
Note: The values for gain 1 and gain 2 are not affected and are within the limits
specified in the Data Sheet.
FADC parameters are valid for VDD / DDAF = 1.235 V to 1.365 V; VDDMF = 2.97 V
to 3.6 V.
TC1782/84, TC1746, BA
42/67
Rel. 1.1, 2012-04-17