Download VX8 Programmer Help

Programming other radio functions
103
Internet (Wires) Settings
The radio can be used to access a "node” (repeater or base station) which is tied into
the Vertex Standard WIRES™ (Wide-Coverage Internet Repeater Enhancement
System) network, operating in the "SRG” (Sister Radio Group) mode.
· Access Number - Set the DTMF tone for SRG access.
· Auto Dialer Mode - Enable or disable the auto dialer for transmission of
access tones. This auto dialer is independent of that for the non-Internet
DTMF memories.
· Link Mode - Select SRG or FRG as the Internet access mode.
· Memory Selection - Select one of the 64 preprogrammed Internet access
memories to use for FRG access.
· Memory Channels - Enter a DTMF access string up to 8 characters and a
Name of up to 8 characters to identify that connection.
Note: Turning on the Internet function is not included in the
programmer. When this option is on, a DTMF tone is transmitted at
the beginning of every transmission. This is an annoying and
unexpected action of the radio if this option were to be set when you
were not ready to operate on the Internet.
The programmer makes it easy to configure the settings for the
Internet functionality. Engaging that functionality is left for you to do
from the menu of the radio when you are ready to use it.
3.5. .1
DTMF
The 16-button keypad allows easy DTMF dialing for Autopatch, repeater control, or
Internet-link access purposes.
Besides numerical digits [0] through [9], the keypad includes the [ *] and [#] digits, plus
the [A], [B], [C], and [D] tones often used for repeater control.
© 2009 RT Systems, Inc.