1
Download procedure - Pro
Transcript
Chapter 2 - CREATING BASE SCREENS 2.1 Parts Placing a Date Display The Date Display placement procedure is shown below. Used to display the date. REMARKS PROCEDURE (1)Select the [Parts] menu - [Date Display] command, or click on the icon. (2)In the [General Settings] area, select a display format. Select the yy/mm/ dd format (3)Select a Part Shape from the Browser. If desired, select Colors and Character Size. 2.1 Parts ing a Part Shape Select- DD_3D001 (4)After all of the Part’s attributes have been entered and selected, click on the [Place] button. The Date Display’s outline will appear in the Base screen, next to your cursor. 2-84 LogiTouch Editor Ver. 1.0 Operation Manual - Screen Creation Guide
